From: Samuel Holland Date: Wed, 27 Apr 2022 20:31:26 +0000 (-0500) Subject: ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=2d648e6982e970755e78f9644bbfbe0efef43703;p=u-boot.git ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1 Copy the devicetree source for the A83T SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. As with the other SoCs, updates of note include adding detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland --- diff --git a/arch/arm/dts/axp81x.dtsi b/arch/arm/dts/axp81x.dtsi index 043c717dce..b93387b0c1 100644 --- a/arch/arm/dts/axp81x.dtsi +++ b/arch/arm/dts/axp81x.dtsi @@ -48,6 +48,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power { + compatible = "x-powers,axp813-ac-power-supply"; + status = "disabled"; + }; + axp_adc: adc { compatible = "x-powers,axp813-adc"; #io-channel-cells = <1>; @@ -58,18 +63,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp813-battery-power-supply"; status = "disabled"; }; @@ -166,4 +171,8 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp813-usb-power-supply"; + }; }; diff --git a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 36ecebaff3..9c006fc188 100644 --- a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -79,6 +79,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -146,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts index 2beafe3a31..b60016a442 100644 --- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapi-m3:blue:usr"; gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapi-m3:green:usr"; gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; }; @@ -107,6 +107,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &de { status = "okay"; }; @@ -183,6 +191,11 @@ status = "okay"; }; +&r_cir { + clock-frequency = <3000000>; + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -224,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -301,8 +322,8 @@ ®_dldo3 { regulator-always-on; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-pd"; }; @@ -350,11 +371,37 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts index ecd9ff38a8..e26af7cf10 100644 --- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts @@ -60,25 +60,36 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck-plus:blue:usr"; gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ }; - orange { + led-1 { label = "cubietruck-plus:orange:usr"; gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ }; - white { + led-2 { label = "cubietruck-plus:white:usr"; gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ }; - green { + led-3 { label = "cubietruck-plus:green:usr"; gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ }; @@ -90,7 +101,7 @@ initial-mode = <1>; /* initialize in HUB mode */ disabled-ports = <1>; intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ refclk-frequency = <19200000>; }; @@ -145,6 +156,18 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + +&de { + status = "okay"; +}; + &ehci0 { /* GL830 USB-to-SATA bridge here */ status = "okay"; @@ -164,6 +187,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -239,6 +272,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -386,11 +427,37 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dcdc1>; + vddio-supply = <®_sw>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/dts/sun8i-a83t-tbs-a711.dts index 1537ce148c..13ae10f60d 100644 --- a/arch/arm/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/dts/sun8i-a83t-tbs-a711.dts @@ -46,6 +46,7 @@ #include #include +#include / { model = "TBS A711 Tablet"; @@ -64,7 +65,7 @@ compatible = "pwm-backlight"; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; - + power-supply = <®_sw>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; default-brightness-level = <9>; }; @@ -98,6 +99,13 @@ }; }; + reg_gps: reg-gps { + compatible = "regulator-fixed"; + regulator-name = "gps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -156,10 +164,39 @@ status = "okay"; }; +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ + vcc-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -171,6 +208,7 @@ vqmmc-supply = <®_dldo1>; non-removable; wakeup-source; + keep-power-in-suspend; status = "okay"; brcmf: wifi@1 { @@ -199,6 +237,25 @@ status = "okay"; }; +&r_lradc { + vref-supply = <®_aldo2>; + status = "okay"; + + button-210 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <210000>; + }; + + button-410 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <410000>; + }; +}; + &r_rsb { status = "okay"; @@ -317,8 +374,8 @@ }; ®_dldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-name = "vdd-csi"; }; @@ -390,8 +447,7 @@ }; &tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; + tcon0_out_lcd: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -406,18 +462,45 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pb_pins>; + status = "okay"; + + gnss { + compatible = "u-blox,neo-6m"; + + v-bckp-supply = <®_rtc_ldo>; + vcc-supply = <®_gps>; + current-speed = <9600>; + }; }; &usb_otg { - dr_mode = "otg"; status = "okay"; }; &usbphy { - usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; - usb1_vbus_supply = <®_vmain>; - usb2_vbus_supply = <®_vmain>; + usb1_vbus-supply = <®_vmain>; + usb2_vbus-supply = <®_vmain>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi index 2be23d6009..9c07660080 100644 --- a/arch/arm/dts/sun8i-a83t.dtsi +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -50,6 +50,7 @@ #include #include #include +#include / { interrupt-parent = <&gic>; @@ -61,79 +62,91 @@ #size-cells = <0>; cpu0: cpu@0 { - clocks = <&ccu CLK_C0CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; + #cooling-cells = <2>; }; cpu100: cpu@100 { - clocks = <&ccu CLK_C1CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; + #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; + #cooling-cells = <2>; }; - cpu@102 { + cpu102: cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; + #cooling-cells = <2>; }; - cpu@103 { + cpu103: cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; + #cooling-cells = <2>; }; }; @@ -187,12 +200,7 @@ status = "disabled"; }; - memory { - reg = <0x40000000 0x80000000>; - device_type = "memory"; - }; - - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cluster0 { compatible = "operating-points-v2"; opp-shared; @@ -245,7 +253,7 @@ }; }; - cpu1_opp_table: opp_table1 { + cpu1_opp_table: opp-table-cluster1 { compatible = "operating-points-v2"; opp-shared; @@ -306,16 +314,27 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; - reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_PLL_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + reg = <0x01000000 0x10000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_PLL_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; }; + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = ; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@1100000 { compatible = "allwinner,sun8i-a83t-de2-mixer-0"; reg = <0x01100000 0x100000>; @@ -338,6 +357,11 @@ reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -356,9 +380,17 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -425,6 +457,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; @@ -441,11 +474,14 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -465,9 +501,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -549,6 +593,31 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun8i-a83t-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 8>; + }; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-a83t-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = ; + #mbox-cells = <1>; }; usb_otg: usb@1c19000 { @@ -562,6 +631,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -649,6 +719,20 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + csi_8bit_parallel_pins: csi-8bit-parallel-pins { + pins = "PE0", "PE2", "PE3", "PE6", "PE7", + "PE8", "PE9", "PE10", "PE11", + "PE12", "PE13"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + emac_rgmii_pins: emac-rgmii-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD11", "PD12", "PD13", "PD14", "PD18", @@ -676,6 +760,12 @@ function = "i2c1"; }; + /omit-if-no-ref/ + i2c2_pe_pins: i2c2-pe-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + i2c2_ph_pins: i2c2-ph-pins { pins = "PH4", "PH5"; function = "i2c2"; @@ -747,10 +837,16 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + /omit-if-no-ref/ + uart2_pb_pins: uart2-pb-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = , ; @@ -852,6 +948,39 @@ status = "disabled"; }; + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; @@ -898,12 +1027,10 @@ reg = <0x01c30000 0x104>; interrupts = ; interrupt-names = "macirq"; - resets = <&ccu 13>; - reset-names = "stmmaceth"; - clocks = <&ccu 27>; + clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; status = "disabled"; mdio: mdio { @@ -914,7 +1041,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -924,6 +1051,18 @@ interrupts = ; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-a83t-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-a83t-dw-hdmi"; reg = <0x01ee0000 0x10000>; @@ -935,7 +1074,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled"; @@ -981,7 +1120,7 @@ compatible = "allwinner,sun8i-a83t-r-ccu"; reg = <0x01f01400 0x400>; clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, - <&ccu 6>; + <&ccu CLK_PLL_PERIPH>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -992,6 +1131,26 @@ reg = <0x1f01c00 0x400>; }; + r_cir: ir@1f02000 { + compatible = "allwinner,sun8i-a83t-ir", + "allwinner,sun6i-a31-ir"; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = ; + reg = <0x01f02000 0x400>; + pinctrl-names = "default"; + pinctrl-0 = <&r_cir_pin>; + status = "disabled"; + }; + + r_lradc: lradc@1f03c00 { + compatible = "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01f03c00 0x100>; + interrupts = ; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -1004,6 +1163,11 @@ interrupt-controller; #interrupt-cells = <3>; + r_cir_pin: r-cir-pin { + pins = "PL12"; + function = "s_cir_rx"; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; @@ -1026,5 +1190,82 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: thermal-sensor@1f04000 { + compatible = "allwinner,sun8i-a83t-ths"; + reg = <0x01f04000 0x100>; + interrupts = ; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + + trips { + cpu0_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + cpu1_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu1_hot>; + cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; }; };