From: Pali Rohár Date: Fri, 24 Sep 2021 20:59:21 +0000 (+0200) Subject: arm: mvebu: a38x: serdes: Remove unused PCIe macros and functions X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=28c935b5ee3ab8d437f28df739c0ea1027db6b5c;p=u-boot.git arm: mvebu: a38x: serdes: Remove unused PCIe macros and functions Remove unused PCIe functions from SerDes code. They are unused and are duplicated either from generic PCIe code or from pci_mvebu.c. Remove also unused PCIe macros from SerDes code. They are just obfuscated variants of standards macros in include/pci.h or in pci_mvebu.c. Signed-off-by: Pali Rohár Reviewed-by: Marek Behún Reviewed-by: Stefan Roese --- diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c index 0445b43def..55c3f9ca39 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c +++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c @@ -62,131 +62,3 @@ int hws_pex_config(const struct serdes_map *serdes_map, u8 count) return MV_OK; } - -int pex_local_bus_num_set(u32 pex_if, u32 bus_num) -{ - u32 pex_status; - - DEBUG_INIT_FULL_S("\n### pex_local_bus_num_set ###\n"); - - if (bus_num >= MAX_PEX_BUSSES) { - DEBUG_INIT_C("pex_local_bus_num_set: Illegal bus number %d\n", - bus_num, 4); - return MV_BAD_PARAM; - } - - pex_status = reg_read(PEX_STATUS_REG(pex_if)); - pex_status &= ~PXSR_PEX_BUS_NUM_MASK; - pex_status |= - (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; - reg_write(PEX_STATUS_REG(pex_if), pex_status); - - return MV_OK; -} - -int pex_local_dev_num_set(u32 pex_if, u32 dev_num) -{ - u32 pex_status; - - DEBUG_INIT_FULL_S("\n### pex_local_dev_num_set ###\n"); - - pex_status = reg_read(PEX_STATUS_REG(pex_if)); - pex_status &= ~PXSR_PEX_DEV_NUM_MASK; - pex_status |= - (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; - reg_write(PEX_STATUS_REG(pex_if), pex_status); - - return MV_OK; -} - -/* - * pex_config_read - Read from configuration space - * - * DESCRIPTION: - * This function performs a 32 bit read from PEX configuration space. - * It supports both type 0 and type 1 of Configuration Transactions - * (local and over bridge). In order to read from local bus segment, use - * bus number retrieved from pex_local_bus_num_get(). Other bus numbers - * will result configuration transaction of type 1 (over bridge). - * - * INPUT: - * pex_if - PEX interface number. - * bus - PEX segment bus number. - * dev - PEX device number. - * func - Function number. - * reg_offs - Register offset. - * - * OUTPUT: - * None. - * - * RETURN: - * 32bit register data, 0xffffffff on error - */ -u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off) -{ - u32 pex_data = 0; - u32 local_dev, local_bus; - u32 pex_status; - - pex_status = reg_read(PEX_STATUS_REG(pex_if)); - local_dev = - ((pex_status & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS); - local_bus = - ((pex_status & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS); - - /* - * In PCI Express we have only one device number - * and this number is the first number we encounter - * else that the local_dev - * spec pex define return on config read/write on any device - */ - if (bus == local_bus) { - if (local_dev == 0) { - /* - * if local dev is 0 then the first number we encounter - * after 0 is 1 - */ - if ((dev != 1) && (dev != local_dev)) - return MV_ERROR; - } else { - /* - * if local dev is not 0 then the first number we - * encounter is 0 - */ - if ((dev != 0) && (dev != local_dev)) - return MV_ERROR; - } - } - - /* Creating PEX address to be passed */ - pex_data = (bus << PXCAR_BUS_NUM_OFFS); - pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS); - pex_data |= (func << PXCAR_FUNC_NUM_OFFS); - /* Legacy register space */ - pex_data |= (reg_off & PXCAR_REG_NUM_MASK); - /* Extended register space */ - pex_data |= (((reg_off & PXCAR_REAL_EXT_REG_NUM_MASK) >> - PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); - pex_data |= PXCAR_CONFIG_EN; - - /* Write the address to the PEX configuration address register */ - reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data); - - /* - * In order to let the PEX controller absorbed the address - * of the read transaction we perform a validity check that - * the address was written - */ - if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if))) - return MV_ERROR; - - /* Cleaning Master Abort */ - reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND), - PXSAC_MABORT); - /* Read the Data returned in the PEX Data register */ - pex_data = reg_read(PEX_CFG_DATA_REG(pex_if)); - - DEBUG_INIT_FULL_C(" --> ", pex_data, 4); - - return pex_data; -} diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h index 5d70166fc5..55a4c267c4 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h +++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h @@ -12,28 +12,6 @@ /* Direct access to PEX0 Root Port's PCIe Capability structure */ #define PEX0_RP_PCIE_CFG_OFFSET (0x00080000 + 0x60) -/* Sample at Reset */ -#define MPP_SAMPLE_AT_RESET(id) (0xe4200 + (id * 4)) - -/* PCI Express Control and Status Registers */ -#define MAX_PEX_BUSSES 256 - -#define PEX_IF_REGS_OFFSET(if) ((if) > 0 ? \ - (0x40000 + ((if) - 1) * 0x4000) : \ - 0x80000) -#define PEX_IF_REGS_BASE(if) (PEX_IF_REGS_OFFSET(if)) -#define PEX_CAPABILITIES_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x60) -#define PEX_LINK_CTRL_STATUS2_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x90) -#define PEX_CTRL_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a00) -#define PEX_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a04) -#define PEX_DBG_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a64) -#define PEX_LINK_CAPABILITY_REG 0x6c -#define PEX_LINK_CTRL_STAT_REG 0x70 -#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */ -#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS) -#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */ -#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS) - /* PEX_CAPABILITIES_REG fields */ #define PCIE0_ENABLE_OFFS 0 #define PCIE0_ENABLE_MASK (0x1 << PCIE0_ENABLE_OFFS) @@ -44,45 +22,7 @@ #define PCIE3_ENABLE_OFFS 3 #define PCIE4_ENABLE_MASK (0x1 << PCIE3_ENABLE_OFFS) -/* Controller revision info */ -#define PEX_DEVICE_AND_VENDOR_ID 0x000 -#define PEX_CFG_DIRECT_ACCESS(if, reg) (PEX_IF_REGS_BASE(if) + (reg)) - -/* PCI Express Configuration Address Register */ -#define PXCAR_REG_NUM_OFFS 2 -#define PXCAR_REG_NUM_MAX 0x3f -#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << \ - PXCAR_REG_NUM_OFFS) -#define PXCAR_FUNC_NUM_OFFS 8 -#define PXCAR_FUNC_NUM_MAX 0x7 -#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << \ - PXCAR_FUNC_NUM_OFFS) -#define PXCAR_DEVICE_NUM_OFFS 11 -#define PXCAR_DEVICE_NUM_MAX 0x1f -#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << \ - PXCAR_DEVICE_NUM_OFFS) -#define PXCAR_BUS_NUM_OFFS 16 -#define PXCAR_BUS_NUM_MAX 0xff -#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << \ - PXCAR_BUS_NUM_OFFS) -#define PXCAR_EXT_REG_NUM_OFFS 24 -#define PXCAR_EXT_REG_NUM_MAX 0xf - -#define PEX_CFG_ADDR_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18f8) -#define PEX_CFG_DATA_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18fc) - -#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 -#define PXCAR_REAL_EXT_REG_NUM_MASK (0xf << PXCAR_REAL_EXT_REG_NUM_OFFS) - -#define PXCAR_CONFIG_EN BIT(31) -#define PEX_STATUS_AND_COMMAND 0x004 -#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */ - int hws_pex_config(const struct serdes_map *serdes_map, u8 count); -int pex_local_bus_num_set(u32 pex_if, u32 bus_num); -int pex_local_dev_num_set(u32 pex_if, u32 dev_num); -u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off); - void board_pex_config(void); #endif