From: Lukas Auer Date: Sun, 17 Mar 2019 18:28:35 +0000 (+0100) Subject: riscv: delay initialization of caches and debug UART X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=2503ccc55ff2031ae2ff476fb06f666e6d1c7a64;p=u-boot.git riscv: delay initialization of caches and debug UART Move the initialization of the caches and the debug UART until after board_init_f_init_reserve. This is in preparation for SMP support, where code prior to this point will be executed by all harts. This ensures that initialization will only be performed once on the main hart running U-Boot. Signed-off-by: Lukas Auer Reviewed-by: Anup Patel Reviewed-by: Bin Meng --- diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 81ea52b170..a30f6f7194 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -45,10 +45,6 @@ _start: /* mask all interrupts */ csrw MODE_PREFIX(ie), zero - /* Enable cache */ - jal icache_enable - jal dcache_enable - /* * Set stackpointer in internal/ex RAM to call board_init_f */ @@ -57,10 +53,6 @@ call_board_init_f: li t1, CONFIG_SYS_INIT_SP_ADDR and sp, t1, t0 /* force 16 byte alignment */ -#ifdef CONFIG_DEBUG_UART - jal debug_uart_init -#endif - call_board_init_f_0: mv a0, sp jal board_init_f_alloc_reserve @@ -74,6 +66,14 @@ call_board_init_f_0: /* save the boot hart id to global_data */ SREG s0, GD_BOOT_HART(gp) + /* Enable cache */ + jal icache_enable + jal dcache_enable + +#ifdef CONFIG_DEBUG_UART + jal debug_uart_init +#endif + mv a0, zero /* a0 <-- boot_flags = 0 */ la t5, board_init_f jr t5 /* jump to board_init_f() */