From: Marco Schuster Date: Sun, 29 Nov 2015 18:30:42 +0000 (+0100) Subject: Re-enable setexpr on Raspberry Pi X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=247be79a99041e0b5f56cea4100f5cc98e827b64;p=u-boot.git Re-enable setexpr on Raspberry Pi This patch re-enables the setexpr command, I don't really understand why it got excluded in the first place. setexpr can be used e.g. to implement failed-boot-counters and failovers to rescue firmware. Signed-off-by: Marco Schuster --- diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 5c9e69af3b..bd81ee6a1d 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -6,5 +6,4 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index b8b267f371..5d27909ebe 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -6,5 +6,4 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y