From: Andre Przywara Date: Thu, 19 Oct 2023 14:45:32 +0000 (+0100) Subject: sunxi: dts: arm: update devicetree files from Linux-v6.6-rc6 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=1fe28c0aa60a30438f60e56c76ca65a9bc30a5d4;p=u-boot.git sunxi: dts: arm: update devicetree files from Linux-v6.6-rc6 Sync the devicetree files from the official Linux kernel tree, v6.6-rc6. This is covering Allwinner SoCs with 32-bit ARM cores, minus the T113s board and related .dtsi files, which come separately. Only small changes: Bluetooth got enabled on the C.H.I.P., and a clock got renamed. More interesting is the addition of a board, for which U-Boot enablement patches are pending. As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec --- diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi index ca240cd6f6..469d0f7d51 100644 --- a/arch/arm/dts/axp209.dtsi +++ b/arch/arm/dts/axp209.dtsi @@ -48,6 +48,13 @@ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf */ +/ { + pmic-temp { + compatible = "iio-hwmon"; + io-channels = <&axp_adc 4>; /* Internal temperature */ + }; +}; + &axp209 { compatible = "x-powers,axp209"; interrupt-controller; diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts index fd37bd1f39..4192c23848 100644 --- a/arch/arm/dts/sun5i-r8-chip.dts +++ b/arch/arm/dts/sun5i-r8-chip.dts @@ -255,6 +255,12 @@ pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + }; }; &usb_otg { diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi index 250d6b87ab..d7c7b454a1 100644 --- a/arch/arm/dts/sun5i.dtsi +++ b/arch/arm/dts/sun5i.dtsi @@ -286,7 +286,7 @@ clock-names = "ahb", "tcon-ch0", "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; status = "disabled"; @@ -517,6 +517,15 @@ bias-pull-up; }; + /omit-if-no-ref/ + mmc2_4bit_pe_pins: mmc2-4bit-pe-pins { + pins = "PE4", "PE5", "PE6", "PE7", + "PE8", "PE9"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", diff --git a/arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts new file mode 100644 index 0000000000..577ead1d02 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2023 In-Circuit GmbH + +/dts-v1/; + +#include "sun7i-a20-icnova-a20.dtsi" + +#include +#include + +/ { + model = "In-Circuit ICnova A20 ADB4006"; + compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */ + default-state = "on"; + }; + + led-1 { + function = LED_FUNCTION_HEARTBEAT; + color = ; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +®_ahci_5v { + status = "okay"; +}; + +&ac_power_supply { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-icnova-a20.dtsi b/arch/arm/dts/sun7i-a20-icnova-a20.dtsi new file mode 100644 index 0000000000..46616c6bc8 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-icnova-a20.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2023 In-Circuit GmbH + +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 84c6d9379a..a0cac966af 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -190,7 +190,7 @@ clock-names = "ahb", "tcon-ch0", "lvds-alt"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_LCD>, <&ccu RST_BUS_LVDS>; diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi index 9c07660080..cc40622466 100644 --- a/arch/arm/dts/sun8i-a83t.dtsi +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -456,7 +456,7 @@ interrupts = ; clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi index b001251644..3b9a282c27 100644 --- a/arch/arm/dts/sun8i-v3s.dtsi +++ b/arch/arm/dts/sun8i-v3s.dtsi @@ -191,7 +191,7 @@ <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; + clock-output-names = "tcon-data-clock"; #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>; reset-names = "lcd";