From: Jonas Karlman Date: Sat, 17 Feb 2024 00:22:34 +0000 (+0000) Subject: rockchip: rk3328: Fix loading FIT from SD-card when booting from eMMC X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=1e21f569304573759b61ca8ee38087c5509ef070;p=u-boot.git rockchip: rk3328: Fix loading FIT from SD-card when booting from eMMC When RK3328 boards run SPL from eMMC and fail to load FIT from eMMC due to it being missing or checksum validation fails there is a fallback to read FIT from SD-card. However, without proper pinctrl configuration reading FIT from SD-card will fail: U-Boot SPL 2024.04-rc1 (Feb 05 2024 - 22:18:22 +0000) Trying to boot from MMC1 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC2 Card did not respond to voltage select! : -110 spl: mmc init failed with error: -95 Trying to boot from MMC1 mmc_load_image_raw_sector: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Fix this by tagging related emmc and sdmmc pinctrl nodes with bootph props. Also sort and move common nodes shared by all boards to the SoC u-boot.dtsi. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 12b68df1ac..38ad3cc16d 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -44,3 +44,7 @@ /* Integrated PHY unsupported by U-Boot */ status = "broken"; }; + +&vcc_sd { + bootph-pre-ram; +}; diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi index 0a1152e8b5..cca4f06145 100644 --- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi +++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi @@ -7,23 +7,18 @@ #include "rk3328-u-boot.dtsi" #include "rk3328-sdram-ddr4-666.dtsi" -&gpio0 { +&gpio1 { bootph-pre-ram; }; -&pinctrl { - bootph-pre-ram; -}; - -&sdmmc0m1_pin { - bootph-pre-ram; +&sdio_vcc_pin { + bootph-all; }; -&pcfg_pull_up_4ma { +&vcc_io_sdio { bootph-pre-ram; }; -/* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; }; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi index 8a4189c6f1..7cdf691379 100644 --- a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi @@ -7,29 +7,16 @@ #include "rk3328-u-boot.dtsi" #include "rk3328-sdram-lpddr3-666.dtsi" -&gpio0 { - bootph-pre-ram; -}; - -&pinctrl { - bootph-pre-ram; -}; - -&sdmmc0m1_pin { +&spi0 { bootph-pre-ram; -}; + bootph-some-ram; -&pcfg_pull_up_4ma { - bootph-pre-ram; + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; }; -/* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; }; - -&spi0 { - spi_flash: spiflash@0 { - bootph-all; - }; -}; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi index 2e3b6a77a2..35baeb2464 100644 --- a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi @@ -7,29 +7,16 @@ #include "rk3328-u-boot.dtsi" #include "rk3328-sdram-ddr4-666.dtsi" -&gpio0 { - bootph-pre-ram; -}; - -&pinctrl { - bootph-pre-ram; -}; - -&sdmmc0m1_pin { +&spi0 { bootph-pre-ram; -}; + bootph-some-ram; -&pcfg_pull_up_4ma { - bootph-pre-ram; + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; }; -/* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; }; - -&spi0 { - spi_flash: spiflash@0 { - bootph-all; - }; -}; diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi index 8bc2f134f8..47d74964fd 100644 --- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi +++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi @@ -29,23 +29,6 @@ }; }; -&gpio0 { - bootph-pre-ram; -}; - -&pinctrl { - bootph-pre-ram; -}; - -&sdmmc0m1_pin { - bootph-pre-ram; -}; - -&pcfg_pull_up_4ma { - bootph-pre-ram; -}; - -/* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; }; diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi index 1f220c6dcd..9ed0aef1ec 100644 --- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi @@ -29,23 +29,6 @@ }; }; -&gpio0 { - bootph-pre-ram; -}; - -&pinctrl { - bootph-pre-ram; -}; - -&sdmmc0m1_pin { - bootph-pre-ram; -}; - -&pcfg_pull_up_4ma { - bootph-pre-ram; -}; - -/* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; }; diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi index bfe506fd22..9de645d8d7 100644 --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi @@ -29,29 +29,16 @@ }; }; -&gpio0 { - bootph-pre-ram; -}; - -&pinctrl { - bootph-pre-ram; -}; - -&sdmmc0m1_pin { +&spi0 { bootph-pre-ram; -}; + bootph-some-ram; -&pcfg_pull_up_4ma { - bootph-pre-ram; + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; }; -/* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; }; - -&spi0 { - spi_flash: flash@0 { - bootph-all; - }; -}; diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi index a12be7876d..687c16da51 100644 --- a/arch/arm/dts/rk3328-u-boot.dtsi +++ b/arch/arm/dts/rk3328-u-boot.dtsi @@ -38,33 +38,104 @@ bootph-all; }; +&emmc { + bootph-pre-ram; + bootph-some-ram; + + /* mmc to sram can't do dma, prevent aborts transferring TF-A parts */ + u-boot,spl-fifo-mode; +}; + +&emmc_bus8 { + bootph-pre-ram; +}; + +&emmc_clk { + bootph-pre-ram; +}; + +&emmc_cmd { + bootph-pre-ram; +}; + +&gpio0 { + bootph-pre-ram; +}; + &grf { bootph-all; }; -&uart2 { +&pcfg_pull_none { bootph-all; - clock-frequency = <24000000>; }; -&emmc { +&pcfg_pull_none_8ma { + bootph-pre-ram; +}; + +&pcfg_pull_none_12ma { + bootph-pre-ram; +}; + +&pcfg_pull_up { bootph-all; +}; - /* mmc to sram can't do dma, prevent aborts transfering TF-A parts */ - u-boot,spl-fifo-mode; +&pcfg_pull_up_4ma { + bootph-pre-ram; +}; + +&pcfg_pull_up_8ma { + bootph-pre-ram; +}; + +&pcfg_pull_up_12ma { + bootph-pre-ram; +}; + +&pinctrl { + bootph-pre-ram; + bootph-some-ram; }; &sdmmc { - bootph-all; + bootph-pre-ram; + bootph-some-ram; - /* mmc to sram can't do dma, prevent aborts transfering TF-A parts */ + /* mmc to sram can't do dma, prevent aborts transferring TF-A parts */ u-boot,spl-fifo-mode; }; -&usb20_otg { - hnp-srp-disable; +&sdmmc0_bus4 { + bootph-pre-ram; +}; + +&sdmmc0_clk { + bootph-pre-ram; +}; + +&sdmmc0_cmd { + bootph-pre-ram; +}; + +&sdmmc0_dectn { + bootph-pre-ram; +}; + +&sdmmc0m1_pin { + bootph-pre-ram; +}; + +&uart2 { + bootph-all; + clock-frequency = <24000000>; }; -&spi0 { +&uart2m1_xfer { bootph-all; }; + +&usb20_otg { + hnp-srp-disable; +};