From: Adam Ford Date: Sat, 12 Feb 2022 12:12:40 +0000 (-0600) Subject: arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=1c6ea4da24c7481720b8eaee32532a7881863dc9;p=u-boot.git arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO With LTO enabled, some functions appear to be optimized in a way that causes hanging on some OMAP3 boards after some unrelated patches were applied. The solution appears to make several functions __used. There also appears be to be some dead code, so remove it while cleaning this up. This has been tested on a general purpose OMAP3530, DM3730, and AM3517. Signed-off-by: Adam Ford --- diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index a6e9ff84aa..e7078a32db 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -45,16 +45,12 @@ void gpmc_init(void); void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs, u32 base, u32 size); void set_gpmc_cs0(int flash_type); - void watchdog_init(void); void set_muxconf_regs(void); - u32 get_cpu_family(void); u32 get_cpu_rev(void); -u32 get_sku_id(void); u32 is_gpmc_muxed(void); u32 get_gpmc0_type(void); -u32 get_gpmc0_width(void); u32 is_running_in_sdram(void); u32 is_running_in_sram(void); u32 is_running_in_flash(void); diff --git a/arch/arm/mach-omap2/omap3/sys_info.c b/arch/arm/mach-omap2/omap3/sys_info.c index ac72633c20..5f535e2782 100644 --- a/arch/arm/mach-omap2/omap3/sys_info.c +++ b/arch/arm/mach-omap2/omap3/sys_info.c @@ -55,7 +55,7 @@ void omap_die_id(unsigned int *die_id) /****************************************** * get_cpu_type(void) - extract cpu info ******************************************/ -u32 get_cpu_type(void) +static u32 get_cpu_type(void) { return readl(&ctrl_base->ctrl_omap_stat); } @@ -64,7 +64,7 @@ u32 get_cpu_type(void) * get_cpu_id(void) - extract cpu id * returns 0 for ES1.0, cpuid otherwise ******************************************/ -u32 get_cpu_id(void) +static u32 get_cpu_id(void) { struct ctrl_id *id_base; u32 cpuid = 0; @@ -89,7 +89,7 @@ u32 get_cpu_id(void) /****************************************** * get_cpu_family(void) - extract cpu info ******************************************/ -u32 get_cpu_family(void) +__used u32 get_cpu_family(void) { u16 hawkeye; u32 cpu_family; @@ -119,7 +119,7 @@ u32 get_cpu_family(void) /****************************************** * get_cpu_rev(void) - extract version info ******************************************/ -u32 get_cpu_rev(void) +__used u32 get_cpu_rev(void) { u32 cpuid = get_cpu_id(); @@ -132,41 +132,12 @@ u32 get_cpu_rev(void) /***************************************************************** * get_sku_id(void) - read sku_id to get info on max clock rate *****************************************************************/ -u32 get_sku_id(void) +static u32 get_sku_id(void) { struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; return readl(&id_base->sku_id) & SKUID_CLK_MASK; } -/*************************************************************************** - * get_gpmc0_base() - Return current address hardware will be - * fetching from. The below effectively gives what is correct, its a bit - * mis-leading compared to the TRM. For the most general case the mask - * needs to be also taken into account this does work in practice. - * - for u-boot we currently map: - * -- 0 to nothing, - * -- 4 to flash - * -- 8 to enent - * -- c to wifi - ****************************************************************************/ -u32 get_gpmc0_base(void) -{ - u32 b; - - b = readl(&gpmc_cfg->cs[0].config7); - b &= 0x1F; /* keep base [5:0] */ - b = b << 24; /* ret 0x0b000000 */ - return b; -} - -/******************************************************************* - * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) - *******************************************************************/ -u32 get_gpmc0_width(void) -{ - return WIDTH_16BIT; -} - /************************************************************************* * get_board_rev() - setup to pass kernel board revision information * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)