From: Nishanth Menon Date: Thu, 30 May 2013 03:19:31 +0000 (+0000) Subject: ARM: OMAP5: DRA7xx: support class 0 optimized voltages X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=18c9d55ac611784d161440bb9f127e372e132856;p=u-boot.git ARM: OMAP5: DRA7xx: support class 0 optimized voltages DRA752 now uses AVS Class 0 voltages which are voltages in efuse. This means that we can now use the optimized voltages which are stored as mV values in efuse and program PMIC accordingly. This allows us to go with higher OPP as needed in the system without the need for implementing complex AVS logic. Signed-off-by: Nishanth Menon Signed-off-by: Lokesh Vutla --- diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 6c8226d393..9c75c13c9f 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -521,6 +521,38 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) gpio_direction_output(pmic->gpio, 1); } +static u32 optimize_vcore_voltage(struct volts const *v) +{ + u32 val; + if (!v->value) + return 0; + if (!v->efuse.reg) + return v->value; + + switch (v->efuse.reg_bits) { + case 16: + val = readw(v->efuse.reg); + break; + case 32: + val = readl(v->efuse.reg); + break; + default: + printf("Error: efuse 0x%08x bits=%d unknown\n", + v->efuse.reg, v->efuse.reg_bits); + return v->value; + } + + if (!val) { + printf("Error: efuse 0x%08x bits=%d val=0, using %d\n", + v->efuse.reg, v->efuse.reg_bits, v->value); + return v->value; + } + + debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n", + __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val); + return val; +} + /* * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva * We set the maximum voltages allowed here because Smart-Reflex is not @@ -529,11 +561,13 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) */ void scale_vcores(struct vcores_data const *vcores) { - do_scale_vcore(vcores->core.addr, vcores->core.value, - vcores->core.pmic); + u32 val; + + val = optimize_vcore_voltage(&vcores->core); + do_scale_vcore(vcores->core.addr, val, vcores->core.pmic); - do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, - vcores->mpu.pmic); + val = optimize_vcore_voltage(&vcores->mpu); + do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic); /* Configure MPU ABB LDO after scale */ abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, @@ -544,17 +578,17 @@ void scale_vcores(struct vcores_data const *vcores) OMAP_ABB_MPU_TXDONE_MASK, OMAP_ABB_FAST_OPP); - do_scale_vcore(vcores->mm.addr, vcores->mm.value, - vcores->mm.pmic); + val = optimize_vcore_voltage(&vcores->mm); + do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic); - do_scale_vcore(vcores->gpu.addr, vcores->gpu.value, - vcores->gpu.pmic); + val = optimize_vcore_voltage(&vcores->gpu); + do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic); - do_scale_vcore(vcores->eve.addr, vcores->eve.value, - vcores->eve.pmic); + val = optimize_vcore_voltage(&vcores->eve); + do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic); - do_scale_vcore(vcores->iva.addr, vcores->iva.value, - vcores->iva.pmic); + val = optimize_vcore_voltage(&vcores->iva); + do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { /* Configure LDO SRAM "magic" bits */ diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 90274a02cf..bddcaed179 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -338,22 +338,32 @@ struct vcores_data omap5430_volts_es2 = { struct vcores_data dra752_volts = { .mpu.value = VDD_MPU_DRA752, + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU, .mpu.pmic = &tps659038, .eve.value = VDD_EVE_DRA752, + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE, .eve.pmic = &tps659038, .gpu.value = VDD_GPU_DRA752, + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU, .gpu.pmic = &tps659038, .core.value = VDD_CORE_DRA752, + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, .core.addr = TPS659038_REG_ADDR_SMPS7_CORE, .core.pmic = &tps659038, .iva.value = VDD_IVA_DRA752, + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA, .iva.pmic = &tps659038, }; diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index f7ddd5ffe5..6d02835ead 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -219,6 +219,36 @@ #define VDD_CORE_DRA752 1030 #define VDD_IVA_DRA752 1060 +/* Efuse register offsets for DRA7xx platform */ +#define DRA752_EFUSE_BASE 0x4A002000 +#define DRA752_EFUSE_REGBITS 16 +/* STD_FUSE_OPP_VMIN_IVA_2 */ +#define STD_FUSE_OPP_VMIN_IVA_NOM (DRA752_EFUSE_BASE + 0x05CC) +/* STD_FUSE_OPP_VMIN_IVA_3 */ +#define STD_FUSE_OPP_VMIN_IVA_OD (DRA752_EFUSE_BASE + 0x05D0) +/* STD_FUSE_OPP_VMIN_IVA_4 */ +#define STD_FUSE_OPP_VMIN_IVA_HIGH (DRA752_EFUSE_BASE + 0x05D4) +/* STD_FUSE_OPP_VMIN_DSPEVE_2 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_NOM (DRA752_EFUSE_BASE + 0x05E0) +/* STD_FUSE_OPP_VMIN_DSPEVE_3 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_OD (DRA752_EFUSE_BASE + 0x05E4) +/* STD_FUSE_OPP_VMIN_DSPEVE_4 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH (DRA752_EFUSE_BASE + 0x05E8) +/* STD_FUSE_OPP_VMIN_CORE_2 */ +#define STD_FUSE_OPP_VMIN_CORE_NOM (DRA752_EFUSE_BASE + 0x05F4) +/* STD_FUSE_OPP_VMIN_GPU_2 */ +#define STD_FUSE_OPP_VMIN_GPU_NOM (DRA752_EFUSE_BASE + 0x1B08) +/* STD_FUSE_OPP_VMIN_GPU_3 */ +#define STD_FUSE_OPP_VMIN_GPU_OD (DRA752_EFUSE_BASE + 0x1B0C) +/* STD_FUSE_OPP_VMIN_GPU_4 */ +#define STD_FUSE_OPP_VMIN_GPU_HIGH (DRA752_EFUSE_BASE + 0x1B10) +/* STD_FUSE_OPP_VMIN_MPU_2 */ +#define STD_FUSE_OPP_VMIN_MPU_NOM (DRA752_EFUSE_BASE + 0x1B20) +/* STD_FUSE_OPP_VMIN_MPU_3 */ +#define STD_FUSE_OPP_VMIN_MPU_OD (DRA752_EFUSE_BASE + 0x1B24) +/* STD_FUSE_OPP_VMIN_MPU_4 */ +#define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28) + /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 3b8bece699..f51fccce59 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -506,9 +506,20 @@ struct pmic_data { int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data); }; +/** + * struct volts_efuse_data - efuse definition for voltage + * @reg: register address for efuse + * @reg_bits: Number of bits in a register address, mandatory. + */ +struct volts_efuse_data { + u32 reg; + u8 reg_bits; +}; + struct volts { u32 value; u32 addr; + struct volts_efuse_data efuse; struct pmic_data *pmic; };