From: Chris Morgan Date: Mon, 15 May 2023 16:00:32 +0000 (-0500) Subject: doc: anbernic: Update RGxx3 Docs for panel detection X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=182d0ba6d6fe2155571babcc7b09f7a838e00e92;p=u-boot.git doc: anbernic: Update RGxx3 Docs for panel detection Update the Anbernic RGxx3 documentation to note that panel detection has been added and how it works. Signed-off-by: Chris Morgan Reviewed-by: Kever Yang --- diff --git a/doc/board/anbernic/rgxx3.rst b/doc/board/anbernic/rgxx3.rst index afa7538282..7d1beb423c 100644 --- a/doc/board/anbernic/rgxx3.rst +++ b/doc/board/anbernic/rgxx3.rst @@ -7,27 +7,36 @@ This allows U-Boot to boot the following Anbernic devices: - Anbernic RG353M - Anbernic RG353P + - Anbernic RG353PS - Anbernic RG353V - Anbernic RG353VS - Anbernic RG503 The correct device is detected automatically by comparing ADC values -from ADC channel 1. In the event of an RG353V, an attempt is then made -to probe for an eMMC and if it fails the device is assumed to be an -RG353VS. Based on the detected device, the environment variables -"board", "board_name", and "fdtfile" are set to the correct values -corresponding to the board which can be read by a boot script to boot -with the correct device tree. - -Please note that there are some versions of the RG353 devices with -different panels. Panel auto-detection is planned for a later date. +from ADC channel 1. In the event of an RG353V or RG353P, an attempt +is then made to probe for an eMMC and if it fails the device is assumed +to be an RG353VS or RG353PS. Based on the detected device, the +environment variables "board", "board_name", and "fdtfile" are set to +the correct values corresponding to the board which can be read by a +boot script to boot with the correct device tree. If the board detected +is not of type RG503 (which currently has only 1 panel revision) a +panel detect is then performed by probing a "dummy" display on the DSI +bus and then querying the display ID. The display ID is then compared +to a table to get the known compatible string for use in Linux, and +this string is saved as an environment variable of "panel". + +FDT fixups are performed in the event of an RG353M to change the device +name, or in the event the panel detected does not match the devicetree. +This allows Linux to load the correct panel driver without having to +know exactly which panel is used (as there is no user distingushable +way to tell). Building U-Boot --------------- .. code-block:: bash - $ export CROSS_COMPILE=aarch64-none-elf- + $ export CROSS_COMPILE=aarch64-linux-gnu- $ export BL31=../rkbin/bin/rk35/rk3568_bl31_v1.34.elf $ export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3568_ddr_1056MHz_v1.13.bin $ make anbernic-rgxx3_defconfig @@ -40,7 +49,7 @@ Image installation ------------------ Write the ``u-boot-rockchip.bin`` to an SD card offset 32kb from the -start. +start. Please note that eMMC booting has not been tested at this time. .. code-block:: bash