From: Simon Glass Date: Sun, 1 May 2016 17:36:09 +0000 (-0600) Subject: dm: scsi: Separate the non-command code into its own file X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=11f610edf01abc96ca10e82e1752648ee911705b;p=u-boot.git dm: scsi: Separate the non-command code into its own file At present the SCSI command code includes both the command-processing code and the core SCSI functions and data structures. Separate the latter into its own file, adding functions as needed to avoid the command code accessing data structures directly. This functions use the new legacy block functions. With this commit: - There is no CONFIG option referenced from the command code - The concept of a 'current SCSI device' is confined to the command code This will make it easier to convert this code to driver model. Signed-off-by: Simon Glass --- diff --git a/cmd/Makefile b/cmd/Makefile index 6612a3b2b5..e3e0c74ffc 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -155,12 +155,6 @@ obj-$(CONFIG_CMD_PMIC) += pmic.o obj-$(CONFIG_CMD_REGULATOR) += regulator.o endif # !CONFIG_SPL_BUILD -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_SATA_SUPPORT -obj-$(CONFIG_SCSI) += scsi.o -endif -endif # CONFIG_SPL_BUILD - obj-$(CONFIG_CMD_BLOB) += blob.o # core command diff --git a/cmd/scsi.c b/cmd/scsi.c index 751fc5818a..387ca1a262 100644 --- a/cmd/scsi.c +++ b/cmd/scsi.c @@ -10,355 +10,27 @@ */ #include #include -#include -#include #include -#include -#include - -#ifdef CONFIG_SCSI_DEV_LIST -#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST -#else -#ifdef CONFIG_SCSI_SYM53C8XX -#define SCSI_VEND_ID 0x1000 -#ifndef CONFIG_SCSI_DEV_ID -#define SCSI_DEV_ID 0x0001 -#else -#define SCSI_DEV_ID CONFIG_SCSI_DEV_ID -#endif -#elif defined CONFIG_SATA_ULI5288 - -#define SCSI_VEND_ID 0x10b9 -#define SCSI_DEV_ID 0x5288 - -#elif !defined(CONFIG_SCSI_AHCI_PLAT) -#error no scsi device defined -#endif -#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} -#endif - -#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) -const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; -#endif -static ccb tempccb; /* temporary scsi command buffer */ - -static unsigned char tempbuff[512]; /* temporary data buffer */ - -static int scsi_max_devs; /* number of highest available scsi device */ static int scsi_curr_dev; /* current device */ -static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; - -/* almost the maximum amount of the scsi_ext command.. */ -#define SCSI_MAX_READ_BLK 0xFFFF -#define SCSI_LBA48_READ 0xFFFFFFF - -#ifdef CONFIG_SYS_64BIT_LBA -void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks) -{ - pccb->cmd[0] = SCSI_READ16; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff; - pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff; - pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff; - pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff; - pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff; - pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff; - pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff; - pccb->cmd[9] = (unsigned char)start & 0xff; - pccb->cmd[10] = 0; - pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff; - pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff; - pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff; - pccb->cmd[14] = (unsigned char)blocks & 0xff; - pccb->cmd[15] = 0; - pccb->cmdlen = 16; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n", - pccb->cmd[0], pccb->cmd[1], - pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], - pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], - pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); -} -#endif - -void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks) -{ - pccb->cmd[0] = SCSI_READ10; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; - pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; - pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; - pccb->cmd[5] = (unsigned char)start & 0xff; - pccb->cmd[6] = 0; - pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff; - pccb->cmd[8] = (unsigned char)blocks & 0xff; - pccb->cmd[6] = 0; - pccb->cmdlen=10; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - debug ("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", - pccb->cmd[0],pccb->cmd[1], - pccb->cmd[2],pccb->cmd[3],pccb->cmd[4],pccb->cmd[5], - pccb->cmd[7],pccb->cmd[8]); -} - -void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) -{ - pccb->cmd[0] = SCSI_WRITE10; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; - pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; - pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; - pccb->cmd[5] = (unsigned char)start & 0xff; - pccb->cmd[6] = 0; - pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff; - pccb->cmd[8] = (unsigned char)blocks & 0xff; - pccb->cmd[9] = 0; - pccb->cmdlen = 10; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", - __func__, - pccb->cmd[0], pccb->cmd[1], - pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], - pccb->cmd[7], pccb->cmd[8]); -} - -void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks) -{ - pccb->cmd[0] = SCSI_READ6; - pccb->cmd[1] = pccb->lun << 5 | ((unsigned char)(start >> 16) & 0x1f); - pccb->cmd[2] = (unsigned char)(start >> 8) & 0xff; - pccb->cmd[3] = (unsigned char)start & 0xff; - pccb->cmd[4] = (unsigned char)blocks & 0xff; - pccb->cmd[5] = 0; - pccb->cmdlen=6; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - debug("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n", - pccb->cmd[0], pccb->cmd[1], - pccb->cmd[2], pccb->cmd[3], pccb->cmd[4]); -} - - -void scsi_setup_inquiry(ccb * pccb) -{ - pccb->cmd[0] = SCSI_INQUIRY; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = 0; - pccb->cmd[3] = 0; - if (pccb->datalen > 255) - pccb->cmd[4] = 255; - else - pccb->cmd[4] = (unsigned char)pccb->datalen; - pccb->cmd[5] = 0; - pccb->cmdlen=6; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ -} - -static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, void *buffer) -{ - int device = block_dev->devnum; - lbaint_t start, blks; - uintptr_t buf_addr; - unsigned short smallblks = 0; - ccb* pccb=(ccb *)&tempccb; - device&=0xff; - - /* Setup device */ - pccb->target = scsi_dev_desc[device].target; - pccb->lun = scsi_dev_desc[device].lun; - buf_addr = (unsigned long)buffer; - start = blknr; - blks = blkcnt; - debug("\nscsi_read: dev %d startblk " LBAF - ", blccnt " LBAF " buffer %lx\n", - device, start, blks, (unsigned long)buffer); - do { - pccb->pdata = (unsigned char *)buf_addr; -#ifdef CONFIG_SYS_64BIT_LBA - if (start > SCSI_LBA48_READ) { - unsigned long blocks; - blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); - pccb->datalen = scsi_dev_desc[device].blksz * blocks; - scsi_setup_read16(pccb, start, blocks); - start += blocks; - blks -= blocks; - } else -#endif - if (blks > SCSI_MAX_READ_BLK) { - pccb->datalen = scsi_dev_desc[device].blksz * - SCSI_MAX_READ_BLK; - smallblks = SCSI_MAX_READ_BLK; - scsi_setup_read_ext(pccb, start, smallblks); - start += SCSI_MAX_READ_BLK; - blks -= SCSI_MAX_READ_BLK; - } - else { - pccb->datalen = scsi_dev_desc[device].blksz * blks; - smallblks = (unsigned short)blks; - scsi_setup_read_ext(pccb, start, smallblks); - start += blks; - blks=0; - } - debug("scsi_read_ext: startblk " LBAF - ", blccnt %x buffer %" PRIXPTR "\n", - start, smallblks, buf_addr); - if (scsi_exec(pccb) != true) { - scsi_print_error(pccb); - blkcnt -= blks; - break; - } - buf_addr+=pccb->datalen; - } while (blks != 0); - debug("scsi_read_ext: end startblk " LBAF - ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); - return blkcnt; -} - -/******************************************************************************* - * scsi_write - */ - -/* Almost the maximum amount of the scsi_ext command.. */ -#define SCSI_MAX_WRITE_BLK 0xFFFF - -static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, const void *buffer) -{ - int device = block_dev->devnum; - lbaint_t start, blks; - uintptr_t buf_addr; - unsigned short smallblks; - ccb* pccb = (ccb *)&tempccb; - device &= 0xff; - /* Setup device - */ - pccb->target = scsi_dev_desc[device].target; - pccb->lun = scsi_dev_desc[device].lun; - buf_addr = (unsigned long)buffer; - start = blknr; - blks = blkcnt; - debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", - __func__, device, start, blks, (unsigned long)buffer); - do { - pccb->pdata = (unsigned char *)buf_addr; - if (blks > SCSI_MAX_WRITE_BLK) { - pccb->datalen = (scsi_dev_desc[device].blksz * - SCSI_MAX_WRITE_BLK); - smallblks = SCSI_MAX_WRITE_BLK; - scsi_setup_write_ext(pccb, start, smallblks); - start += SCSI_MAX_WRITE_BLK; - blks -= SCSI_MAX_WRITE_BLK; - } else { - pccb->datalen = scsi_dev_desc[device].blksz * blks; - smallblks = (unsigned short)blks; - scsi_setup_write_ext(pccb, start, smallblks); - start += blks; - blks = 0; - } - debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", - __func__, start, smallblks, buf_addr); - if (scsi_exec(pccb) != true) { - scsi_print_error(pccb); - blkcnt -= blks; - break; - } - buf_addr += pccb->datalen; - } while (blks != 0); - debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", - __func__, start, smallblks, buf_addr); - return blkcnt; -} - -int scsi_get_disk_count(void) -{ - return scsi_max_devs; -} - -#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) -void scsi_init(void) -{ - int busdevfunc = -1; - int i; - /* - * Find a device from the list, this driver will support a single - * controller. - */ - for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { - /* get PCI Device ID */ -#ifdef CONFIG_DM_PCI - struct udevice *dev; - int ret; - - ret = dm_pci_find_device(scsi_device_list[i].vendor, - scsi_device_list[i].device, 0, &dev); - if (!ret) { - busdevfunc = dm_pci_get_bdf(dev); - break; - } -#else - busdevfunc = pci_find_device(scsi_device_list[i].vendor, - scsi_device_list[i].device, - 0); -#endif - if (busdevfunc != -1) - break; - } - - if (busdevfunc == -1) { - printf("Error: SCSI Controller(s) "); - for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { - printf("%04X:%04X ", - scsi_device_list[i].vendor, - scsi_device_list[i].device); - } - printf("not found\n"); - return; - } -#ifdef DEBUG - else { - printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", - scsi_device_list[i].vendor, - scsi_device_list[i].device, - (busdevfunc >> 16) & 0xFF, - (busdevfunc >> 11) & 0x1F, - (busdevfunc >> 8) & 0x7); - } -#endif - bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); - scsi_low_level_init(busdevfunc); - scsi_scan(1); - bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); -} -#endif - -#ifdef CONFIG_PARTITIONS -struct blk_desc *scsi_get_dev(int dev) -{ - return (dev < CONFIG_SYS_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL; -} -#endif - -#ifndef CONFIG_SPL_BUILD -/****************************************************************************** +/* * scsi boot command intepreter. Derived from diskboot */ -int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_scsiboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { return common_diskboot(cmdtp, "scsi", argc, argv); } -/********************************************************************************* +/* * scsi command intepreter */ -int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_scsi(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { switch (argc) { case 0: case 1: return CMD_RET_USAGE; - case 2: if (strncmp(argv[1], "res", 3) == 0) { printf("\nReset SCSI\n"); @@ -367,23 +39,15 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } if (strncmp(argv[1], "inf", 3) == 0) { - int i; - for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; ++i) { - if (scsi_dev_desc[i].type == DEV_TYPE_UNKNOWN) - continue; /* list only known devices */ - printf("SCSI dev. %d: ", i); - dev_print(&scsi_dev_desc[i]); - } + blk_list_devices(IF_TYPE_SCSI); return 0; } if (strncmp(argv[1], "dev", 3) == 0) { - if (scsi_curr_dev < 0 || - scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE) { + if (blk_print_device_num(IF_TYPE_SCSI, scsi_curr_dev)) { printf("\nno SCSI devices available\n"); - return 1; + return CMD_RET_FAILURE; } - printf("\n Device %d: ", scsi_curr_dev); - dev_print(&scsi_dev_desc[scsi_curr_dev]); + return 0; } if (strncmp(argv[1], "scan", 4) == 0) { @@ -391,46 +55,32 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } if (strncmp(argv[1], "part", 4) == 0) { - int dev, ok; - for (ok = 0, dev = 0; - dev < CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) { - if (scsi_dev_desc[dev].type != - DEV_TYPE_UNKNOWN) { - ok++; - if (dev) - printf("\n"); - debug("print_part of %x\n", dev); - part_print(&scsi_dev_desc[dev]); - } - } - if (!ok) + if (blk_list_part(IF_TYPE_SCSI)) printf("\nno SCSI devices available\n"); - return 1; + return 0; } return CMD_RET_USAGE; case 3: if (strncmp(argv[1], "dev", 3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); - printf("\nSCSI device %d: ", dev); - if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) { - printf("unknown device\n"); - return 1; + + if (!blk_show_device(IF_TYPE_SCSI, dev)) { + scsi_curr_dev = dev; + printf("... is now current device\n"); + } else { + return CMD_RET_FAILURE; } - printf("\n Device %d: ", dev); - dev_print(&scsi_dev_desc[dev]); - if (scsi_dev_desc[dev].type == DEV_TYPE_UNKNOWN) - return 1; - scsi_curr_dev = dev; - printf("... is now current device\n"); return 0; } if (strncmp(argv[1], "part", 4) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); - if (scsi_dev_desc[dev].type != DEV_TYPE_UNKNOWN) - part_print(&scsi_dev_desc[dev]); - else - printf("\nSCSI device %d not available\n", dev); - return 1; + + if (blk_print_part_devnum(IF_TYPE_SCSI, dev)) { + printf("\nSCSI device %d not available\n", + dev); + return CMD_RET_FAILURE; + } + return 0; } return CMD_RET_USAGE; default: @@ -440,10 +90,11 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong blk = simple_strtoul(argv[3], NULL, 16); ulong cnt = simple_strtoul(argv[4], NULL, 16); ulong n; + printf("\nSCSI read: device %d block # %ld, count %ld ... ", scsi_curr_dev, blk, cnt); - n = scsi_read(&scsi_dev_desc[scsi_curr_dev], - blk, cnt, (ulong *)addr); + n = blk_read_devnum(IF_TYPE_SCSI, scsi_curr_dev, blk, + cnt, (ulong *)addr); printf("%ld blocks read: %s\n", n, n == cnt ? "OK" : "ERROR"); return 0; @@ -452,10 +103,11 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong blk = simple_strtoul(argv[3], NULL, 16); ulong cnt = simple_strtoul(argv[4], NULL, 16); ulong n; + printf("\nSCSI write: device %d block # %ld, count %ld ... ", scsi_curr_dev, blk, cnt); - n = scsi_write(&scsi_dev_desc[scsi_curr_dev], - blk, cnt, (ulong *)addr); + n = blk_write_devnum(IF_TYPE_SCSI, scsi_curr_dev, blk, + cnt, (ulong *)addr); printf("%ld blocks written: %s\n", n, n == cnt ? "OK" : "ERROR"); return 0; @@ -483,223 +135,3 @@ U_BOOT_CMD( "boot from SCSI device", "loadAddr dev:part" ); -#endif - -/* copy src to dest, skipping leading and trailing blanks - * and null terminate the string - */ -void scsi_ident_cpy(unsigned char *dest, unsigned char *src, unsigned int len) -{ - int start,end; - - start = 0; - while (start < len) { - if (src[start] != ' ') - break; - start++; - } - end = len-1; - while (end > start) { - if (src[end] != ' ') - break; - end--; - } - for (; start <= end; start++) - *dest ++= src[start]; - *dest='\0'; -} - - -/* Trim trailing blanks, and NUL-terminate string - */ -void scsi_trim_trail (unsigned char *str, unsigned int len) -{ - unsigned char *p = str + len - 1; - - while (len-- > 0) { - *p-- = '\0'; - if (*p != ' ') { - return; - } - } -} - -int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) -{ - *capacity = 0; - - memset(pccb->cmd, '\0', sizeof(pccb->cmd)); - pccb->cmd[0] = SCSI_RD_CAPAC10; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmdlen = 10; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - - pccb->datalen = 8; - if (scsi_exec(pccb) != true) - return 1; - - *capacity = ((lbaint_t)pccb->pdata[0] << 24) | - ((lbaint_t)pccb->pdata[1] << 16) | - ((lbaint_t)pccb->pdata[2] << 8) | - ((lbaint_t)pccb->pdata[3]); - - if (*capacity != 0xffffffff) { - /* Read capacity (10) was sufficient for this drive. */ - *blksz = ((unsigned long)pccb->pdata[4] << 24) | - ((unsigned long)pccb->pdata[5] << 16) | - ((unsigned long)pccb->pdata[6] << 8) | - ((unsigned long)pccb->pdata[7]); - return 0; - } - - /* Read capacity (10) was insufficient. Use read capacity (16). */ - memset(pccb->cmd, '\0', sizeof(pccb->cmd)); - pccb->cmd[0] = SCSI_RD_CAPAC16; - pccb->cmd[1] = 0x10; - pccb->cmdlen = 16; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - - pccb->datalen = 16; - if (scsi_exec(pccb) != true) - return 1; - - *capacity = ((uint64_t)pccb->pdata[0] << 56) | - ((uint64_t)pccb->pdata[1] << 48) | - ((uint64_t)pccb->pdata[2] << 40) | - ((uint64_t)pccb->pdata[3] << 32) | - ((uint64_t)pccb->pdata[4] << 24) | - ((uint64_t)pccb->pdata[5] << 16) | - ((uint64_t)pccb->pdata[6] << 8) | - ((uint64_t)pccb->pdata[7]); - - *blksz = ((uint64_t)pccb->pdata[8] << 56) | - ((uint64_t)pccb->pdata[9] << 48) | - ((uint64_t)pccb->pdata[10] << 40) | - ((uint64_t)pccb->pdata[11] << 32) | - ((uint64_t)pccb->pdata[12] << 24) | - ((uint64_t)pccb->pdata[13] << 16) | - ((uint64_t)pccb->pdata[14] << 8) | - ((uint64_t)pccb->pdata[15]); - - return 0; -} - - -/************************************************************************************ - * Some setup (fill-in) routines - */ -void scsi_setup_test_unit_ready(ccb * pccb) -{ - pccb->cmd[0] = SCSI_TST_U_RDY; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = 0; - pccb->cmd[3] = 0; - pccb->cmd[4] = 0; - pccb->cmd[5] = 0; - pccb->cmdlen = 6; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ -} - -/********************************************************************************* - * (re)-scan the scsi bus and reports scsi device info - * to the user if mode = 1 - */ -void scsi_scan(int mode) -{ - unsigned char i,perq,modi,lun; - lbaint_t capacity; - unsigned long blksz; - ccb* pccb=(ccb *)&tempccb; - - if (mode == 1) - printf("scanning bus for devices...\n"); - for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) { - scsi_dev_desc[i].target = 0xff; - scsi_dev_desc[i].lun = 0xff; - scsi_dev_desc[i].lba = 0; - scsi_dev_desc[i].blksz = 0; - scsi_dev_desc[i].log2blksz = - LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz)); - scsi_dev_desc[i].type = DEV_TYPE_UNKNOWN; - scsi_dev_desc[i].vendor[0] = 0; - scsi_dev_desc[i].product[0] = 0; - scsi_dev_desc[i].revision[0] = 0; - scsi_dev_desc[i].removable = false; - scsi_dev_desc[i].if_type = IF_TYPE_SCSI; - scsi_dev_desc[i].devnum = i; - scsi_dev_desc[i].part_type = PART_TYPE_UNKNOWN; - scsi_dev_desc[i].block_read = scsi_read; - scsi_dev_desc[i].block_write = scsi_write; - } - scsi_max_devs = 0; - for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { - pccb->target = i; - for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) { - pccb->lun = lun; - pccb->pdata = (unsigned char *)&tempbuff; - pccb->datalen = 512; - scsi_setup_inquiry(pccb); - if (scsi_exec(pccb) != true) { - if(pccb->contr_stat==SCSI_SEL_TIME_OUT) { - debug("Selection timeout ID %d\n", - pccb->target); - continue; /* selection timeout => assuming no device present */ - } - scsi_print_error(pccb); - continue; - } - perq = tempbuff[0]; - modi = tempbuff[1]; - if ((perq & 0x1f) == 0x1f) - continue; /* skip unknown devices */ - if ((modi & 0x80) == 0x80) /* drive is removable */ - scsi_dev_desc[scsi_max_devs].removable = true; - /* get info for this device */ - scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0], - &tempbuff[8], 8); - scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0], - &tempbuff[16], 16); - scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0], - &tempbuff[32], 4); - scsi_dev_desc[scsi_max_devs].target = pccb->target; - scsi_dev_desc[scsi_max_devs].lun = pccb->lun; - - pccb->datalen = 0; - scsi_setup_test_unit_ready(pccb); - if (scsi_exec(pccb) != true) { - if (scsi_dev_desc[scsi_max_devs].removable) { - scsi_dev_desc[scsi_max_devs].type = - perq; - goto removable; - } - scsi_print_error(pccb); - continue; - } - if (scsi_read_capacity(pccb, &capacity, &blksz)) { - scsi_print_error(pccb); - continue; - } - scsi_dev_desc[scsi_max_devs].lba = capacity; - scsi_dev_desc[scsi_max_devs].blksz = blksz; - scsi_dev_desc[scsi_max_devs].log2blksz = - LOG2(scsi_dev_desc[scsi_max_devs].blksz); - scsi_dev_desc[scsi_max_devs].type = perq; - part_init(&scsi_dev_desc[scsi_max_devs]); -removable: - if(mode==1) { - printf (" Device %d: ", scsi_max_devs); - dev_print(&scsi_dev_desc[scsi_max_devs]); - } /* if mode */ - scsi_max_devs++; - } /* next LUN */ - } - if (scsi_max_devs > 0) - scsi_curr_dev = 0; - else - scsi_curr_dev = -1; - - printf("Found %d device(s).\n", scsi_max_devs); -#ifndef CONFIG_SPL_BUILD - setenv_ulong("scsidevs", scsi_max_devs); -#endif -} diff --git a/common/Makefile b/common/Makefile index b23f312006..397df61016 100644 --- a/common/Makefile +++ b/common/Makefile @@ -84,6 +84,7 @@ obj-$(CONFIG_LCD_ROTATION) += lcd_console_rotation.o obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o obj-$(CONFIG_LYNXKDI) += lynxkdi.o obj-$(CONFIG_MENU) += menu.o +obj-$(CONFIG_SCSI) += scsi.o obj-$(CONFIG_UPDATE_TFTP) += update.o obj-$(CONFIG_DFU_TFTP) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o @@ -112,6 +113,9 @@ obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o endif +ifdef CONFIG_SPL_SATA_SUPPORT +obj-$(CONFIG_SCSI) += scsi.o +endif endif #environment obj-y += env_common.o diff --git a/common/scsi.c b/common/scsi.c new file mode 100644 index 0000000000..a336a10753 --- /dev/null +++ b/common/scsi.c @@ -0,0 +1,567 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#ifdef CONFIG_SCSI_DEV_LIST +#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST +#else +#ifdef CONFIG_SCSI_SYM53C8XX +#define SCSI_VEND_ID 0x1000 +#ifndef CONFIG_SCSI_DEV_ID +#define SCSI_DEV_ID 0x0001 +#else +#define SCSI_DEV_ID CONFIG_SCSI_DEV_ID +#endif +#elif defined CONFIG_SATA_ULI5288 + +#define SCSI_VEND_ID 0x10b9 +#define SCSI_DEV_ID 0x5288 + +#elif !defined(CONFIG_SCSI_AHCI_PLAT) +#error no scsi device defined +#endif +#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#endif + +#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) +const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; +#endif +static ccb tempccb; /* temporary scsi command buffer */ + +static unsigned char tempbuff[512]; /* temporary data buffer */ + +static int scsi_max_devs; /* number of highest available scsi device */ + +static int scsi_curr_dev; /* current device */ + +static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; + +/* almost the maximum amount of the scsi_ext command.. */ +#define SCSI_MAX_READ_BLK 0xFFFF +#define SCSI_LBA48_READ 0xFFFFFFF + +#ifdef CONFIG_SYS_64BIT_LBA +void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks) +{ + pccb->cmd[0] = SCSI_READ16; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff; + pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff; + pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff; + pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff; + pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff; + pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff; + pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff; + pccb->cmd[9] = (unsigned char)start & 0xff; + pccb->cmd[10] = 0; + pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff; + pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff; + pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff; + pccb->cmd[14] = (unsigned char)blocks & 0xff; + pccb->cmd[15] = 0; + pccb->cmdlen = 16; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n", + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], + pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], + pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); +} +#endif + +void scsi_setup_read_ext(ccb *pccb, lbaint_t start, unsigned short blocks) +{ + pccb->cmd[0] = SCSI_READ10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; + pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; + pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; + pccb->cmd[5] = (unsigned char)start & 0xff; + pccb->cmd[6] = 0; + pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff; + pccb->cmd[8] = (unsigned char)blocks & 0xff; + pccb->cmd[6] = 0; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], + pccb->cmd[7], pccb->cmd[8]); +} + +void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) +{ + pccb->cmd[0] = SCSI_WRITE10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; + pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; + pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; + pccb->cmd[5] = (unsigned char)start & 0xff; + pccb->cmd[6] = 0; + pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff; + pccb->cmd[8] = (unsigned char)blocks & 0xff; + pccb->cmd[9] = 0; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", + __func__, + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], + pccb->cmd[7], pccb->cmd[8]); +} + +void scsi_setup_read6(ccb *pccb, lbaint_t start, unsigned short blocks) +{ + pccb->cmd[0] = SCSI_READ6; + pccb->cmd[1] = pccb->lun << 5 | ((unsigned char)(start >> 16) & 0x1f); + pccb->cmd[2] = (unsigned char)(start >> 8) & 0xff; + pccb->cmd[3] = (unsigned char)start & 0xff; + pccb->cmd[4] = (unsigned char)blocks & 0xff; + pccb->cmd[5] = 0; + pccb->cmdlen = 6; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n", + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4]); +} + + +void scsi_setup_inquiry(ccb *pccb) +{ + pccb->cmd[0] = SCSI_INQUIRY; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = 0; + pccb->cmd[3] = 0; + if (pccb->datalen > 255) + pccb->cmd[4] = 255; + else + pccb->cmd[4] = (unsigned char)pccb->datalen; + pccb->cmd[5] = 0; + pccb->cmdlen = 6; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ +} + +static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, + lbaint_t blkcnt, void *buffer) +{ + int device = block_dev->devnum; + lbaint_t start, blks; + uintptr_t buf_addr; + unsigned short smallblks = 0; + ccb *pccb = (ccb *)&tempccb; + device &= 0xff; + + /* Setup device */ + pccb->target = scsi_dev_desc[device].target; + pccb->lun = scsi_dev_desc[device].lun; + buf_addr = (unsigned long)buffer; + start = blknr; + blks = blkcnt; + debug("\nscsi_read: dev %d startblk " LBAF + ", blccnt " LBAF " buffer %lx\n", + device, start, blks, (unsigned long)buffer); + do { + pccb->pdata = (unsigned char *)buf_addr; +#ifdef CONFIG_SYS_64BIT_LBA + if (start > SCSI_LBA48_READ) { + unsigned long blocks; + blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); + pccb->datalen = scsi_dev_desc[device].blksz * blocks; + scsi_setup_read16(pccb, start, blocks); + start += blocks; + blks -= blocks; + } else +#endif + if (blks > SCSI_MAX_READ_BLK) { + pccb->datalen = scsi_dev_desc[device].blksz * + SCSI_MAX_READ_BLK; + smallblks = SCSI_MAX_READ_BLK; + scsi_setup_read_ext(pccb, start, smallblks); + start += SCSI_MAX_READ_BLK; + blks -= SCSI_MAX_READ_BLK; + } else { + pccb->datalen = scsi_dev_desc[device].blksz * blks; + smallblks = (unsigned short)blks; + scsi_setup_read_ext(pccb, start, smallblks); + start += blks; + blks = 0; + } + debug("scsi_read_ext: startblk " LBAF + ", blccnt %x buffer %" PRIXPTR "\n", + start, smallblks, buf_addr); + if (scsi_exec(pccb) != true) { + scsi_print_error(pccb); + blkcnt -= blks; + break; + } + buf_addr += pccb->datalen; + } while (blks != 0); + debug("scsi_read_ext: end startblk " LBAF + ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); + return blkcnt; +} + +/******************************************************************************* + * scsi_write + */ + +/* Almost the maximum amount of the scsi_ext command.. */ +#define SCSI_MAX_WRITE_BLK 0xFFFF + +static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, + lbaint_t blkcnt, const void *buffer) +{ + int device = block_dev->devnum; + lbaint_t start, blks; + uintptr_t buf_addr; + unsigned short smallblks; + ccb *pccb = (ccb *)&tempccb; + + device &= 0xff; + + /* Setup device */ + pccb->target = scsi_dev_desc[device].target; + pccb->lun = scsi_dev_desc[device].lun; + buf_addr = (unsigned long)buffer; + start = blknr; + blks = blkcnt; + debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", + __func__, device, start, blks, (unsigned long)buffer); + do { + pccb->pdata = (unsigned char *)buf_addr; + if (blks > SCSI_MAX_WRITE_BLK) { + pccb->datalen = (scsi_dev_desc[device].blksz * + SCSI_MAX_WRITE_BLK); + smallblks = SCSI_MAX_WRITE_BLK; + scsi_setup_write_ext(pccb, start, smallblks); + start += SCSI_MAX_WRITE_BLK; + blks -= SCSI_MAX_WRITE_BLK; + } else { + pccb->datalen = scsi_dev_desc[device].blksz * blks; + smallblks = (unsigned short)blks; + scsi_setup_write_ext(pccb, start, smallblks); + start += blks; + blks = 0; + } + debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", + __func__, start, smallblks, buf_addr); + if (scsi_exec(pccb) != true) { + scsi_print_error(pccb); + blkcnt -= blks; + break; + } + buf_addr += pccb->datalen; + } while (blks != 0); + debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", + __func__, start, smallblks, buf_addr); + return blkcnt; +} + +int scsi_get_disk_count(void) +{ + return scsi_max_devs; +} + +#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) +void scsi_init(void) +{ + int busdevfunc = -1; + int i; + /* + * Find a device from the list, this driver will support a single + * controller. + */ + for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { + /* get PCI Device ID */ +#ifdef CONFIG_DM_PCI + struct udevice *dev; + int ret; + + ret = dm_pci_find_device(scsi_device_list[i].vendor, + scsi_device_list[i].device, 0, &dev); + if (!ret) { + busdevfunc = dm_pci_get_bdf(dev); + break; + } +#else + busdevfunc = pci_find_device(scsi_device_list[i].vendor, + scsi_device_list[i].device, + 0); +#endif + if (busdevfunc != -1) + break; + } + + if (busdevfunc == -1) { + printf("Error: SCSI Controller(s) "); + for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { + printf("%04X:%04X ", + scsi_device_list[i].vendor, + scsi_device_list[i].device); + } + printf("not found\n"); + return; + } +#ifdef DEBUG + else { + printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", + scsi_device_list[i].vendor, + scsi_device_list[i].device, + (busdevfunc >> 16) & 0xFF, + (busdevfunc >> 11) & 0x1F, + (busdevfunc >> 8) & 0x7); + } +#endif + bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); + scsi_low_level_init(busdevfunc); + scsi_scan(1); + bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); +} +#endif + +#ifdef CONFIG_PARTITIONS +struct blk_desc *scsi_get_dev(int dev) +{ + return (dev < CONFIG_SYS_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL; +} +#endif + +/* copy src to dest, skipping leading and trailing blanks + * and null terminate the string + */ +void scsi_ident_cpy(unsigned char *dest, unsigned char *src, unsigned int len) +{ + int start, end; + + start = 0; + while (start < len) { + if (src[start] != ' ') + break; + start++; + } + end = len-1; + while (end > start) { + if (src[end] != ' ') + break; + end--; + } + for (; start <= end; start++) + *dest ++= src[start]; + *dest = '\0'; +} + + +/* Trim trailing blanks, and NUL-terminate string + */ +void scsi_trim_trail(unsigned char *str, unsigned int len) +{ + unsigned char *p = str + len - 1; + + while (len-- > 0) { + *p-- = '\0'; + if (*p != ' ') + return; + } +} + +int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) +{ + *capacity = 0; + + memset(pccb->cmd, '\0', sizeof(pccb->cmd)); + pccb->cmd[0] = SCSI_RD_CAPAC10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + + pccb->datalen = 8; + if (scsi_exec(pccb) != true) + return 1; + + *capacity = ((lbaint_t)pccb->pdata[0] << 24) | + ((lbaint_t)pccb->pdata[1] << 16) | + ((lbaint_t)pccb->pdata[2] << 8) | + ((lbaint_t)pccb->pdata[3]); + + if (*capacity != 0xffffffff) { + /* Read capacity (10) was sufficient for this drive. */ + *blksz = ((unsigned long)pccb->pdata[4] << 24) | + ((unsigned long)pccb->pdata[5] << 16) | + ((unsigned long)pccb->pdata[6] << 8) | + ((unsigned long)pccb->pdata[7]); + return 0; + } + + /* Read capacity (10) was insufficient. Use read capacity (16). */ + memset(pccb->cmd, '\0', sizeof(pccb->cmd)); + pccb->cmd[0] = SCSI_RD_CAPAC16; + pccb->cmd[1] = 0x10; + pccb->cmdlen = 16; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + + pccb->datalen = 16; + if (scsi_exec(pccb) != true) + return 1; + + *capacity = ((uint64_t)pccb->pdata[0] << 56) | + ((uint64_t)pccb->pdata[1] << 48) | + ((uint64_t)pccb->pdata[2] << 40) | + ((uint64_t)pccb->pdata[3] << 32) | + ((uint64_t)pccb->pdata[4] << 24) | + ((uint64_t)pccb->pdata[5] << 16) | + ((uint64_t)pccb->pdata[6] << 8) | + ((uint64_t)pccb->pdata[7]); + + *blksz = ((uint64_t)pccb->pdata[8] << 56) | + ((uint64_t)pccb->pdata[9] << 48) | + ((uint64_t)pccb->pdata[10] << 40) | + ((uint64_t)pccb->pdata[11] << 32) | + ((uint64_t)pccb->pdata[12] << 24) | + ((uint64_t)pccb->pdata[13] << 16) | + ((uint64_t)pccb->pdata[14] << 8) | + ((uint64_t)pccb->pdata[15]); + + return 0; +} + + +/* + * Some setup (fill-in) routines + */ +void scsi_setup_test_unit_ready(ccb *pccb) +{ + pccb->cmd[0] = SCSI_TST_U_RDY; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = 0; + pccb->cmd[3] = 0; + pccb->cmd[4] = 0; + pccb->cmd[5] = 0; + pccb->cmdlen = 6; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ +} + +/* + * (re)-scan the scsi bus and reports scsi device info + * to the user if mode = 1 + */ +void scsi_scan(int mode) +{ + unsigned char i, perq, modi, lun; + lbaint_t capacity; + unsigned long blksz; + ccb *pccb = (ccb *)&tempccb; + + if (mode == 1) + printf("scanning bus for devices...\n"); + for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) { + scsi_dev_desc[i].target = 0xff; + scsi_dev_desc[i].lun = 0xff; + scsi_dev_desc[i].lba = 0; + scsi_dev_desc[i].blksz = 0; + scsi_dev_desc[i].log2blksz = + LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz)); + scsi_dev_desc[i].type = DEV_TYPE_UNKNOWN; + scsi_dev_desc[i].vendor[0] = 0; + scsi_dev_desc[i].product[0] = 0; + scsi_dev_desc[i].revision[0] = 0; + scsi_dev_desc[i].removable = false; + scsi_dev_desc[i].if_type = IF_TYPE_SCSI; + scsi_dev_desc[i].devnum = i; + scsi_dev_desc[i].part_type = PART_TYPE_UNKNOWN; + scsi_dev_desc[i].block_read = scsi_read; + scsi_dev_desc[i].block_write = scsi_write; + } + scsi_max_devs = 0; + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + pccb->target = i; + for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) { + pccb->lun = lun; + pccb->pdata = (unsigned char *)&tempbuff; + pccb->datalen = 512; + scsi_setup_inquiry(pccb); + if (scsi_exec(pccb) != true) { + if (pccb->contr_stat == SCSI_SEL_TIME_OUT) { + /* + * selection timeout => assuming no + * device present + */ + debug("Selection timeout ID %d\n", + pccb->target); + continue; + } + scsi_print_error(pccb); + continue; + } + perq = tempbuff[0]; + modi = tempbuff[1]; + if ((perq & 0x1f) == 0x1f) + continue; /* skip unknown devices */ + if ((modi & 0x80) == 0x80) /* drive is removable */ + scsi_dev_desc[scsi_max_devs].removable = true; + /* get info for this device */ + scsi_ident_cpy((unsigned char *)&scsi_dev_desc + [scsi_max_devs].vendor[0], + &tempbuff[8], 8); + scsi_ident_cpy((unsigned char *)&scsi_dev_desc + [scsi_max_devs].product[0], + &tempbuff[16], 16); + scsi_ident_cpy((unsigned char *)&scsi_dev_desc + [scsi_max_devs].revision[0], + &tempbuff[32], 4); + scsi_dev_desc[scsi_max_devs].target = pccb->target; + scsi_dev_desc[scsi_max_devs].lun = pccb->lun; + + pccb->datalen = 0; + scsi_setup_test_unit_ready(pccb); + if (scsi_exec(pccb) != true) { + if (scsi_dev_desc[scsi_max_devs].removable) { + scsi_dev_desc[scsi_max_devs].type = + perq; + goto removable; + } + scsi_print_error(pccb); + continue; + } + if (scsi_read_capacity(pccb, &capacity, &blksz)) { + scsi_print_error(pccb); + continue; + } + scsi_dev_desc[scsi_max_devs].lba = capacity; + scsi_dev_desc[scsi_max_devs].blksz = blksz; + scsi_dev_desc[scsi_max_devs].log2blksz = + LOG2(scsi_dev_desc[scsi_max_devs].blksz); + scsi_dev_desc[scsi_max_devs].type = perq; + part_init(&scsi_dev_desc[scsi_max_devs]); +removable: + if (mode == 1) { + printf(" Device %d: ", scsi_max_devs); + dev_print(&scsi_dev_desc[scsi_max_devs]); + } /* if mode */ + scsi_max_devs++; + } /* next LUN */ + } + if (scsi_max_devs > 0) + scsi_curr_dev = 0; + else + scsi_curr_dev = -1; + + printf("Found %d device(s).\n", scsi_max_devs); +#ifndef CONFIG_SPL_BUILD + setenv_ulong("scsidevs", scsi_max_devs); +#endif +} + +U_BOOT_LEGACY_BLK(scsi) = { + .if_typename = "sata", + .if_type = IF_TYPE_SCSI, + .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE, + .desc = scsi_dev_desc, +};