From: Joseph Chen Date: Thu, 26 Sep 2019 07:43:52 +0000 (+0800) Subject: dm: regulator: support regulator more state X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=11406b8f7e24385ae8ee4065c5a193f2449fc08a;p=u-boot.git dm: regulator: support regulator more state support parse regulator standard property: regulator-off-in-suspend; regulator-init-microvolt; regulator-suspend-microvolt: regulator_get_suspend_enable regulator_set_suspend_enable regulator_get_suspend_value regulator_set_suspend_value Signed-off-by: Joseph Chen Signed-off-by: Elaine Zhang Reviewed-by: Kever Yang --- diff --git a/doc/device-tree-bindings/regulator/regulator.txt b/doc/device-tree-bindings/regulator/regulator.txt index 4ba642b7c7..6c9a02120f 100644 --- a/doc/device-tree-bindings/regulator/regulator.txt +++ b/doc/device-tree-bindings/regulator/regulator.txt @@ -36,6 +36,28 @@ Optional properties: - regulator-always-on: regulator should never be disabled - regulator-boot-on: enabled by bootloader/firmware - regulator-ramp-delay: ramp delay for regulator (in uV/us) +- regulator-init-microvolt: a init allowed Voltage value +- regulator-state-(standby|mem|disk) + type: object + description: + sub-nodes for regulator state in Standby, Suspend-to-RAM, and + Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux + sleep states. + + properties: + regulator-on-in-suspend: + description: regulator should be on in suspend state. + type: boolean + + regulator-off-in-suspend: + description: regulator should be off in suspend state. + type: boolean + + regulator-suspend-microvolt: + description: the default voltage which regulator would be set in + suspend. This property is now deprecated, instead setting voltage + for suspend mode via the API which regulator driver provides is + recommended. Note The "regulator-name" constraint is used for setting the device's uclass @@ -59,7 +81,12 @@ ldo0 { regulator-max-microvolt = <1800000>; regulator-min-microamp = <100000>; regulator-max-microamp = <100000>; + regulator-init-microvolt = <1800000>; regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; }; diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c index 76be95bcd1..90961de95c 100644 --- a/drivers/power/regulator/regulator-uclass.c +++ b/drivers/power/regulator/regulator-uclass.c @@ -77,6 +77,33 @@ int regulator_set_value(struct udevice *dev, int uV) return ret; } +int regulator_set_suspend_value(struct udevice *dev, int uV) +{ + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev); + struct dm_regulator_uclass_platdata *uc_pdata; + + uc_pdata = dev_get_uclass_platdata(dev); + if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV) + return -EINVAL; + if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV) + return -EINVAL; + + if (!ops->set_suspend_value) + return -ENOSYS; + + return ops->set_suspend_value(dev, uV); +} + +int regulator_get_suspend_value(struct udevice *dev) +{ + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev); + + if (!ops->get_suspend_value) + return -ENOSYS; + + return ops->get_suspend_value(dev); +} + /* * To be called with at most caution as there is no check * before setting the actual voltage value. @@ -170,6 +197,26 @@ int regulator_set_enable_if_allowed(struct udevice *dev, bool enable) return ret; } +int regulator_set_suspend_enable(struct udevice *dev, bool enable) +{ + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev); + + if (!ops->set_suspend_enable) + return -ENOSYS; + + return ops->set_suspend_enable(dev, enable); +} + +int regulator_get_suspend_enable(struct udevice *dev) +{ + const struct dm_regulator_ops *ops = dev_get_driver_ops(dev); + + if (!ops->get_suspend_enable) + return -ENOSYS; + + return ops->get_suspend_enable(dev); +} + int regulator_get_mode(struct udevice *dev) { const struct dm_regulator_ops *ops = dev_get_driver_ops(dev); @@ -235,6 +282,14 @@ int regulator_autoset(struct udevice *dev) int ret = 0; uc_pdata = dev_get_uclass_platdata(dev); + + ret = regulator_set_suspend_enable(dev, uc_pdata->suspend_on); + if (!ret && uc_pdata->suspend_on) { + ret = regulator_set_suspend_value(dev, uc_pdata->suspend_uV); + if (!ret) + return ret; + } + if (!uc_pdata->always_on && !uc_pdata->boot_on) return -EMEDIUMTYPE; @@ -243,6 +298,8 @@ int regulator_autoset(struct udevice *dev) if (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UV) ret = regulator_set_value(dev, uc_pdata->min_uV); + if (uc_pdata->init_uV > 0) + ret = regulator_set_value(dev, uc_pdata->init_uV); if (!ret && (uc_pdata->flags & REGULATOR_FLAG_AUTOSET_UA)) ret = regulator_set_current(dev, uc_pdata->min_uA); @@ -363,6 +420,7 @@ static int regulator_post_bind(struct udevice *dev) static int regulator_pre_probe(struct udevice *dev) { struct dm_regulator_uclass_platdata *uc_pdata; + ofnode node; uc_pdata = dev_get_uclass_platdata(dev); if (!uc_pdata) @@ -373,6 +431,8 @@ static int regulator_pre_probe(struct udevice *dev) -ENODATA); uc_pdata->max_uV = dev_read_u32_default(dev, "regulator-max-microvolt", -ENODATA); + uc_pdata->init_uV = dev_read_u32_default(dev, "regulator-init-microvolt", + -ENODATA); uc_pdata->min_uA = dev_read_u32_default(dev, "regulator-min-microamp", -ENODATA); uc_pdata->max_uA = dev_read_u32_default(dev, "regulator-max-microamp", @@ -382,6 +442,16 @@ static int regulator_pre_probe(struct udevice *dev) uc_pdata->ramp_delay = dev_read_u32_default(dev, "regulator-ramp-delay", 0); + node = dev_read_subnode(dev, "regulator-state-mem"); + if (ofnode_valid(node)) { + uc_pdata->suspend_on = !ofnode_read_bool(node, "regulator-off-in-suspend"); + if (ofnode_read_u32(node, "regulator-suspend-microvolt", &uc_pdata->suspend_uV)) + uc_pdata->suspend_uV = uc_pdata->max_uV; + } else { + uc_pdata->suspend_on = true; + uc_pdata->suspend_uV = uc_pdata->max_uV; + } + /* Those values are optional (-ENODATA if unset) */ if ((uc_pdata->min_uV != -ENODATA) && (uc_pdata->max_uV != -ENODATA) && diff --git a/include/power/regulator.h b/include/power/regulator.h index 6c6e2cd4f9..74938dd61e 100644 --- a/include/power/regulator.h +++ b/include/power/regulator.h @@ -168,6 +168,7 @@ struct dm_regulator_uclass_platdata { int mode_count; int min_uV; int max_uV; + int init_uV; int min_uA; int max_uA; unsigned int ramp_delay; @@ -177,6 +178,8 @@ struct dm_regulator_uclass_platdata { int flags; u8 ctrl_reg; u8 volt_reg; + bool suspend_on; + u32 suspend_uV; }; /* Regulator device operations */ @@ -193,6 +196,19 @@ struct dm_regulator_ops { int (*get_value)(struct udevice *dev); int (*set_value)(struct udevice *dev, int uV); + /** + * The regulator suspend output value function calls operates + * on a micro Volts. + * + * get/set_suspen_value - get/set suspend mode output value + * @dev - regulator device + * Sets: + * @uV - set the suspend output value [micro Volts] + * @return output value [uV] on success or negative errno if fail. + */ + int (*set_suspend_value)(struct udevice *dev, int uV); + int (*get_suspend_value)(struct udevice *dev); + /** * The regulator output current function calls operates on a micro Amps. * @@ -217,6 +233,19 @@ struct dm_regulator_ops { int (*get_enable)(struct udevice *dev); int (*set_enable)(struct udevice *dev, bool enable); + /** + * The most basic feature of the regulator output is its enable state + * in suspend mode. + * + * get/set_suspend_enable - get/set enable state of the suspend output + * @dev - regulator device + * Sets: + * @enable - set true - enable or false - disable + * @return true/false for get or -errno if fail; 0 / -errno for set. + */ + int (*set_suspend_enable)(struct udevice *dev, bool enable); + int (*get_suspend_enable)(struct udevice *dev); + /** * The 'get/set_mode()' function calls should operate on a driver- * specific mode id definitions, which should be found in: @@ -261,6 +290,23 @@ int regulator_get_value(struct udevice *dev); */ int regulator_set_value(struct udevice *dev, int uV); +/** + * regulator_set_suspend_value: set the suspend microvoltage value of a given regulator. + * + * @dev - pointer to the regulator device + * @uV - the output suspend value to set [micro Volts] + * @return - 0 on success or -errno val if fails + */ +int regulator_set_suspend_value(struct udevice *dev, int uV); + +/** + * regulator_get_suspend_value: get the suspend microvoltage value of a given regulator. + * + * @dev - pointer to the regulator device + * @return - positive output value [uV] on success or negative errno if fail. + */ +int regulator_get_suspend_value(struct udevice *dev); + /** * regulator_set_value_force: set the microvoltage value of a given regulator * without any min-,max condition check @@ -316,6 +362,23 @@ int regulator_set_enable(struct udevice *dev, bool enable); */ int regulator_set_enable_if_allowed(struct udevice *dev, bool enable); +/** + * regulator_set_suspend_enable: set regulator suspend enable state + * + * @dev - pointer to the regulator device + * @enable - set true or false + * @return - 0 on success or -errno val if fails + */ +int regulator_set_suspend_enable(struct udevice *dev, bool enable); + +/** + * regulator_get_suspend_enable: get regulator suspend enable state + * + * @dev - pointer to the regulator device + * @return - true/false of enable state or -errno val if fails + */ +int regulator_get_suspend_enable(struct udevice *dev); + /** * regulator_get_mode: get active operation mode id of a given regulator * diff --git a/test/dm/regulator.c b/test/dm/regulator.c index e510539542..b967902493 100644 --- a/test/dm/regulator.c +++ b/test/dm/regulator.c @@ -215,6 +215,63 @@ static int dm_test_power_regulator_set_get_mode(struct unit_test_state *uts) } DM_TEST(dm_test_power_regulator_set_get_mode, DM_TESTF_SCAN_FDT); +/* Test regulator set and get suspend Voltage method */ +static int dm_test_power_regulator_set_get_suspend_voltage(struct unit_test_state *uts) +{ + struct dm_regulator_uclass_platdata *uc_pdata; + const struct dm_regulator_ops *ops; + struct udevice *dev; + const char *platname; + int val_set, val_get; + + /* Set and get Voltage of BUCK1 - set to 'min' constraint */ + platname = regulator_names[BUCK1][PLATNAME]; + ut_assertok(regulator_get_by_platname(platname, &dev)); + + uc_pdata = dev_get_uclass_platdata(dev); + ut_assert(uc_pdata); + + ops = dev_get_driver_ops(dev); + + if (ops->set_suspend_value && ops->get_suspend_value) { + val_set = uc_pdata->suspend_uV; + ut_assertok(regulator_set_suspend_value(dev, val_set)); + val_get = regulator_get_suspend_value(dev); + ut_assert(val_get >= 0); + + ut_asserteq(val_set, val_get); + } + return 0; +} +DM_TEST(dm_test_power_regulator_set_get_suspend_voltage, DM_TESTF_SCAN_FDT); + +/* Test regulator set and get suspend Enable method */ +static int dm_test_power_regulator_set_get_suspend_enable(struct unit_test_state *uts) +{ + const struct dm_regulator_ops *ops; + const char *platname; + struct udevice *dev; + bool val_set = true; + + /* Set the Enable of LDO1 - default is disabled */ + platname = regulator_names[LDO1][PLATNAME]; + ut_assertok(regulator_get_by_platname(platname, &dev)); + + ops = dev_get_driver_ops(dev); + + if (ops->set_suspend_enable && ops->get_suspend_enable) { + ut_assertok(regulator_set_suspend_enable(dev, val_set)); + + /* + * Get the Enable state of LDO1 and + * compare it with the requested one + */ + ut_asserteq(regulator_get_suspend_enable(dev), val_set); + } + return 0; +} +DM_TEST(dm_test_power_regulator_set_get_suspend_enable, DM_TESTF_SCAN_FDT); + /* Test regulator autoset method */ static int dm_test_power_regulator_autoset(struct unit_test_state *uts) {