From: Neil Armstrong Date: Thu, 11 Jun 2020 08:53:49 +0000 (+0200) Subject: board: amlogic: move boards doc into doc/board/amlogic X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=0ce3639d6f612d3fc215474a45075717d4e7aaa8;p=u-boot.git board: amlogic: move boards doc into doc/board/amlogic Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong --- diff --git a/board/amlogic/p200/README.nanopi-k2 b/board/amlogic/p200/README.nanopi-k2 deleted file mode 100644 index c8dec3569b..0000000000 --- a/board/amlogic/p200/README.nanopi-k2 +++ /dev/null @@ -1,98 +0,0 @@ -U-Boot for NanoPi-K2 -==================== - -NanoPi-K2 is a single board computer manufactured by FriendlyElec -with the following specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make nanopi-k2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot - > cd amlogic-u-boot - > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile - > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile - > make nanopi-k2_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxb/bl2.bin fip/ - > cp $FIPDIR/gxb/acs.bin fip/ - > cp $FIPDIR/gxb/bl21.bin fip/ - > cp $FIPDIR/gxb/bl30.bin fip/ - > cp $FIPDIR/gxb/bl301.bin fip/ - > cp $FIPDIR/gxb/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/fip_create \ - --bl30 fip/bl30_new.bin \ - --bl31 fip/bl31.img \ - --bl33 fip/bl33.bin \ - fip/fip.bin - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin - - > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ - --input fip/boot_new.bin - --output fip/u-boot.bin - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 diff --git a/board/amlogic/p200/README.p200 b/board/amlogic/p200/README.p200 deleted file mode 100644 index 84d5ca5356..0000000000 --- a/board/amlogic/p200/README.p200 +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for Amlogic P200 -======================= - -P200 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - Gigabit Ethernet - - HDMI 2.0 4K/60Hz display - - 2 x USB 2.0 Host - - eMMC, microSD - - Infrared receiver - - SDIO WiFi Module - - CVBS+Stereo Audio Jack - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make p200_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxb_p200_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p201/README.p201 b/board/amlogic/p201/README.p201 deleted file mode 100644 index 4bb5e95905..0000000000 --- a/board/amlogic/p201/README.p201 +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for Amlogic P201 -======================= - -P201 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 2 x USB 2.0 Host - - eMMC, microSD - - Infrared receiver - - SDIO WiFi Module - - CVBS+Stereo Audio Jack - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make p201_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxb_p201_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.khadas-vim b/board/amlogic/p212/README.khadas-vim deleted file mode 100644 index ccf933861b..0000000000 --- a/board/amlogic/p212/README.khadas-vim +++ /dev/null @@ -1,101 +0,0 @@ -U-Boot for Khadas VIM -======================= - -Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion -Technology Co., Ltd with the following specifications: - - - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG - - 8GB/16GBeMMC - - microSD - - SDIO Wifi Module, Bluetooth - - Two channels IR receiver - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot - > cd vim-u-boot - > make kvim_defconfig - > make CROSS_COMPILE=aarch64-none-elf- - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.libretech-ac b/board/amlogic/p212/README.libretech-ac deleted file mode 100644 index 3f713ec326..0000000000 --- a/board/amlogic/p212/README.libretech-ac +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for LibreTech AC -======================= - -LibreTech AC is a single board computer manufactured by Libre Technology -with the following specifications: - - - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - - ARM Mali 450 GPU - - 512MiB DDR4 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host - - eMMC, SPI NOR Flash - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC - - Ethernet - - USB - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make libretech-ac_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot - > cd amlogic-u-boot - > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh - > make libretech_ac_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > sh $UBOOTDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > sh $UBOOTDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.libretech-cc b/board/amlogic/p212/README.libretech-cc deleted file mode 100644 index 74434d4435..0000000000 --- a/board/amlogic/p212/README.libretech-cc +++ /dev/null @@ -1,134 +0,0 @@ -U-Boot for LibreTech CC -======================= - -LibreTech CC is a single board computer manufactured by Libre Technology -with the following specifications: - - - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 2.0 Host - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make libretech-cc_defconfig - > make - -Image creation -============== - -To boot the system, u-boot must be combined with several earlier stage -bootloaders: - -* bl2.bin: vendor-provided binary blob -* bl21.bin: built from vendor u-boot source -* bl30.bin: vendor-provided binary blob -* bl301.bin: built from vendor u-boot source -* bl31.bin: vendor-provided binary blob -* acs.bin: built from vendor u-boot source - -These binaries and the tools required below have been collected and prebuilt -for convenience at - -Download and extract the libretech-cc release from there, and set FIPDIR to -point to the `fip` subdirectory. - - > export FIPDIR=/path/to/extracted/fip - -Alternatively, you can obtain the original vendor u-boot tree which -contains the required blobs and sources, and build yourself. -Note that old compilers are required for this to build. The compilers here -are suggested by Amlogic, and they are 32-bit x86 binaries. - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > cd amlogic-u-boot - > make libretech_cc_defconfig - > make - > export FIPDIR=$PWD/fip - -Once you have the binaries available (either through the prebuilt download, -or having built the vendor u-boot yourself), you can then proceed to glue -everything together. Go back to mainline U-Boot source tree then : - - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 - -Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no -source code. Should you prefer to avoid that, there are open source reverse -engineered versions available: - -1. gxlimg , which comes with a handy - Makefile that automates the whole process. -2. meson-tools - -However, these community-developed alternatives are not endorsed by or -supported by Amlogic. diff --git a/board/amlogic/p212/README.p212 b/board/amlogic/p212/README.p212 deleted file mode 100644 index 3776f24493..0000000000 --- a/board/amlogic/p212/README.p212 +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for Amlogic P212 -======================= - -P212 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - - ARM Mali 450 GPU - - 2GB DDR3 SDRAM - - 10/100 Ethernet - - HDMI 2.0 4K/60Hz display - - 2 x USB 2.0 Host - - eMMC, microSD - - Infrared receiver - - SDIO WiFi Module - - CVBS+Stereo Audio Jack - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make p212_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxl_p212_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/README.khadas-vim2 b/board/amlogic/q200/README.khadas-vim2 deleted file mode 100644 index 595998c4fa..0000000000 --- a/board/amlogic/q200/README.khadas-vim2 +++ /dev/null @@ -1,102 +0,0 @@ -U-Boot for Khadas VIM2 -======================= - -Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion -Technology Co., Ltd with the following specifications: - - - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz - - ARM Mali T860 GPU - - 2/3GB DDR4 SDRAM - - 10/100/1000 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG - - 16GB/32GB/64GB eMMC - - 2MB SPI Flash - - microSD - - SDIO Wifi Module, Bluetooth - - Two channels IR receiver - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot - > cd vim-u-boot - > make kvim2_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/README.q200 b/board/amlogic/q200/README.q200 deleted file mode 100644 index d4142c88bd..0000000000 --- a/board/amlogic/q200/README.q200 +++ /dev/null @@ -1,101 +0,0 @@ -U-Boot for Amlogic Q200 -======================= - -Q200 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz - - ARM Mali T860 GPU - - 2/3GB DDR4 SDRAM - - 10/100/1000 Ethernet - - HDMI 2.0 4K/60Hz display - - 2 x USB 2.0 Host, 1 x USB 2.0 Device - - 16GB/32GB/64GB eMMC - - 2MB SPI Flash - - microSD - - SDIO Wifi Module, Bluetooth - - IR receiver - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxm_q200_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/s400/README b/board/amlogic/s400/README deleted file mode 100644 index a48db22a42..0000000000 --- a/board/amlogic/s400/README +++ /dev/null @@ -1,109 +0,0 @@ -U-Boot for Amlogic S400 -======================= - -S400 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz - - 1GB DDR4 SDRAM - - 10/100 Ethernet - - 2 x USB 2.0 Host - - eMMC - - Infrared receiver - - SDIO WiFi Module - - MIPI DSI Connector - - Audio HAT Connector - - PCI-E M.2 Connectors - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - eMMC - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make s400_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make axg_s400_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/axg/bl2.bin fip/ - > cp $FIPDIR/axg/acs.bin fip/ - > cp $FIPDIR/axg/bl21.bin fip/ - > cp $FIPDIR/axg/bl30.bin fip/ - > cp $FIPDIR/axg/bl301.bin fip/ - > cp $FIPDIR/axg/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/axg/aml_encrypt_axg --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/sei510/README b/board/amlogic/sei510/README deleted file mode 100644 index d9358aa501..0000000000 --- a/board/amlogic/sei510/README +++ /dev/null @@ -1,122 +0,0 @@ -U-Boot for Amlogic SEI510 -======================= - -SEI510 is a customer board manufactured by SEI Robotics with the following -specifications: - - - Amlogic S905X2 ARM Cortex-A53 quad-core SoC - - 2GB DDR4 SDRAM - - 10/100 Ethernet (Internal PHY) - - 1 x USB 3.0 Host - - eMMC - - SDcard - - Infrared receiver - - SDIO WiFi Module - -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make sei510_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12a_u200_v1_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/sei610/README b/board/amlogic/sei610/README deleted file mode 100644 index d96a94b5e9..0000000000 --- a/board/amlogic/sei610/README +++ /dev/null @@ -1,118 +0,0 @@ -U-Boot for Amlogic SEI610 -========================= - -SEI610 is a customer board manufactured by SEI Robotics with the following -specifications: - - - Amlogic S905X3 ARM Cortex-A55 quad-core SoC - - 2GB DDR4 SDRAM - - 10/100 Ethernet (Internal PHY) - - 1 x USB 3.0 Host - - 1 x USB Type-C DRD - - 1 x FTDI USB Serial Debug Interface - - eMMC - - SDcard - - Infrared receiver - - SDIO WiFi Module - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make sei610_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-4.9-g12a-201904 amlogic-u-boot - > cd amlogic-u-boot - > make sm1_ac200_v1_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/buildroot-openlinux-A113-201901.tgz - > tar xfz buildroot-openlinux-A113-201901.tgz buildroot-openlinux-A113-201901/bootloader - > export BRDIR=$PWD/buildroot-openlinux-A113-201901 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/u200/README b/board/amlogic/u200/README deleted file mode 100644 index a4080eb299..0000000000 --- a/board/amlogic/u200/README +++ /dev/null @@ -1,127 +0,0 @@ -U-Boot for Amlogic U200 -======================= - -U200 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S905D2 ARM Cortex-A53 quad-core SoC - - 2GB DDR4 SDRAM - - 10/100 Ethernet (Internal PHY) - - 1 x USB 3.0 Host - - eMMC - - SDcard - - Infrared receiver - - SDIO WiFi Module - - MIPI DSI Connector - - Audio HAT Connector - - PCI-E M.2 Connector - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make u200_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12a_u200_v1_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.khadas-vim3 b/board/amlogic/w400/README.khadas-vim3 deleted file mode 100644 index 399bf49295..0000000000 --- a/board/amlogic/w400/README.khadas-vim3 +++ /dev/null @@ -1,131 +0,0 @@ -U-Boot for Khadas VIM3 -====================== - -Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion -Technology Co., Ltd. with the following specifications: - - - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC - - 4GB LPDDR4 SDRAM - - Gigabit Ethernet - - HDMI 2.1 display - - 40-pin GPIO header - - 1 x USB 3.0 Host, 1 x USB 2.0 Host - - eMMC, microSD - - M.2 - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim3_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - - > DIR=vim3-u-boot - > git clone --depth 1 \ - https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ - $DIR - - > cd vim3-u-boot - > make kvim3_defconfig - > make - > export UBOOTDIR=$PWD - - Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --ddrfw9 fip/lpddr3_1d.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.khadas-vim3l b/board/amlogic/w400/README.khadas-vim3l deleted file mode 100644 index b2d9abbfd9..0000000000 --- a/board/amlogic/w400/README.khadas-vim3l +++ /dev/null @@ -1,131 +0,0 @@ -U-Boot for Khadas VIM3L -======================= - -Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion -Technology Co., Ltd. with the following specifications: - - - Amlogic S905D3 Arm Cortex-A55 quad-core SoC - - 2GB LPDDR4 SDRAM - - Gigabit Ethernet - - HDMI 2.1 display - - 40-pin GPIO header - - 1 x USB 3.0 Host, 1 x USB 2.0 Host - - eMMC, microSD - - M.2 - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim3l_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - - > DIR=vim3l-u-boot - > git clone --depth 1 \ - https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ - $DIR - - > cd vim3l-u-boot - > make kvim3l_defconfig - > make - > export UBOOTDIR=$PWD - - Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12a/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12a/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12a/bl31.img fip/ - > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12a/piei.fw fip/ - > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --ddrfw9 fip/lpddr3_1d.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.odroid-n2 b/board/amlogic/w400/README.odroid-n2 deleted file mode 100644 index 8142eebea0..0000000000 --- a/board/amlogic/w400/README.odroid-n2 +++ /dev/null @@ -1,129 +0,0 @@ -U-Boot for ODROID-N2 -==================== - -ODROID-N2 is a single board computer manufactured by Hardkernel -Co. Ltd with the following specifications: - - - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - - 4GB DDR4 SDRAM - - Gigabit Ethernet - - HDMI 2.1 4K/60Hz display - - 40-pin GPIO header - - 4 x USB 3.0 Host, 1 x USB OTG - - eMMC, microSD - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-n2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - - > DIR=odroid-n2 - > git clone --depth 1 \ - https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \ - $DIR - - > cd odroid-n2 - > make odroidn2_defconfig - > make - > export UBOOTDIR=$PWD - - Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.w400 b/board/amlogic/w400/README.w400 deleted file mode 100644 index c129717a11..0000000000 --- a/board/amlogic/w400/README.w400 +++ /dev/null @@ -1,129 +0,0 @@ -U-Boot for Amlogic W400 -======================= - -U200 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - - 2GB DDR4 SDRAM - - 10/100 Ethernet (Internal PHY) - - 1 x USB 3.0 Host - - eMMC - - SDcard - - Infrared receiver - - SDIO WiFi Module - - MIPI DSI Connector - - Audio HAT Connector - - PCI-E M.2 Connector - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make w400_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12b_w400_v1_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/ - > cp $FIPDIR/g12b/ddr3_1d.fw fip/ - > cp $FIPDIR/g12b/ddr4_1d.fw fip/ - > cp $FIPDIR/g12b/ddr4_2d.fw fip/ - > cp $FIPDIR/g12b/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12b/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12b/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12b/piei.fw fip/ - > cp $FIPDIR/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst new file mode 100644 index 0000000000..3730419167 --- /dev/null +++ b/doc/board/amlogic/index.rst @@ -0,0 +1,95 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Amlogic +======= + +Hardware Support Matrix +----------------------- + +An up-do-date matrix is also available on: http://linux-meson.com + +This matrix concerns the actual source code version. + ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 | +| | | S805X | S905D | | S905D2 | A311D | S905D3 | +| | | | | | S905Y2 | | | ++===============================+===========+==============+==============+============+============+=============+==============+ +| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | +| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | +| | P200 | LibreTech-CC | | | | | | +| | P201 | LibreTech-AC | | | | | | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| PWM | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Infrared Decoder | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SPI (CC) | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| USB | **Yes** | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| USB OTG | No | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| NAND | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| ADC | **Yes** | **Yes** | **Yes** | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| CEC | No | No | No | *N/A* | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Thermal Sensor | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| LCD/LVDS Output | No | *N/A* | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ + +Board Documentation +------------------- + +.. toctree:: + :maxdepth: 1 + + khadas-vim2 + khadas-vim3l + khadas-vim3 + khadas-vim + libretech-ac + libretech-cc + nanopi-k2 + odroid-c2 + odroid-n2 + p200 + p201 + p212 + q200 + s400 + sei510 + sei610 + u200 + w400 diff --git a/doc/board/amlogic/khadas-vim.rst b/doc/board/amlogic/khadas-vim.rst new file mode 100644 index 0000000000..bbb61c29ef --- /dev/null +++ b/doc/board/amlogic/khadas-vim.rst @@ -0,0 +1,101 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Khadas VIM +====================== + +Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion +Technology Co., Ltd with the following specifications: + + - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG + - 8GB/16GBeMMC + - microSD + - SDIO Wifi Module, Bluetooth + - Two channels IR receiver + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/khadas/u-boot -b Vim vim-u-boot + $ cd vim-u-boot + $ make kvim_defconfig + $ make CROSS_COMPILE=aarch64-none-elf- + $ export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/khadas-vim2.rst b/doc/board/amlogic/khadas-vim2.rst new file mode 100644 index 0000000000..c57d96d8b0 --- /dev/null +++ b/doc/board/amlogic/khadas-vim2.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Khadas VIM2 +======================= + +Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion +Technology Co., Ltd with the following specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - Two channels IR receiver + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim2_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot + $ cd vim-u-boot + $ make kvim2_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/khadas-vim3.rst b/doc/board/amlogic/khadas-vim3.rst new file mode 100644 index 0000000000..c1c03212d2 --- /dev/null +++ b/doc/board/amlogic/khadas-vim3.rst @@ -0,0 +1,132 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Khadas VIM3 +====================== + +Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion +Technology Co., Ltd. with the following specifications: + + - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC + - 4GB LPDDR4 SDRAM + - Gigabit Ethernet + - HDMI 2.1 display + - 40-pin GPIO header + - 1 x USB 3.0 Host, 1 x USB 2.0 Host + - eMMC, microSD + - M.2 + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim3_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + + $ DIR=vim3-u-boot + $ git clone --depth 1 \ + https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ + $DIR + + $ cd vim3-u-boot + $ make kvim3_defconfig + $ make + $ export UBOOTDIR=$PWD + + Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/khadas-vim3l.rst b/doc/board/amlogic/khadas-vim3l.rst new file mode 100644 index 0000000000..b380c17456 --- /dev/null +++ b/doc/board/amlogic/khadas-vim3l.rst @@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Khadas VIM3L +======================= + +Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion +Technology Co., Ltd. with the following specifications: + + - Amlogic S905D3 Arm Cortex-A55 quad-core SoC + - 2GB LPDDR4 SDRAM + - Gigabit Ethernet + - HDMI 2.1 display + - 40-pin GPIO header + - 1 x USB 3.0 Host, 1 x USB 2.0 Host + - eMMC, microSD + - M.2 + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim3l_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + + $ DIR=vim3l-u-boot + $ git clone --depth 1 \ + https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ + $DIR + + $ cd vim3l-u-boot + $ make kvim3l_defconfig + $ make + $ export UBOOTDIR=$PWD + + Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/libretech-ac.rst b/doc/board/amlogic/libretech-ac.rst new file mode 100644 index 0000000000..39bae86d32 --- /dev/null +++ b/doc/board/amlogic/libretech-ac.rst @@ -0,0 +1,110 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for LibreTech AC +======================= + +LibreTech AC is a single board computer manufactured by Libre Technology +with the following specifications: + + - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz + - ARM Mali 450 GPU + - 512MiB DDR4 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host + - eMMC, SPI NOR Flash + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make libretech-ac_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot + $ cd amlogic-u-boot + $ wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh + $ make libretech_ac_defconfig + $ make + $ export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh $UBOOTDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ sh $UBOOTDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/libretech-cc.rst b/doc/board/amlogic/libretech-cc.rst new file mode 100644 index 0000000000..f2e26cabf9 --- /dev/null +++ b/doc/board/amlogic/libretech-cc.rst @@ -0,0 +1,135 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for LibreTech CC +======================= + +LibreTech CC is a single board computer manufactured by Libre Technology +with the following specifications: + + - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make libretech-cc_defconfig + $ make + +Image creation +-------------- + +To boot the system, u-boot must be combined with several earlier stage +bootloaders: + +* bl2.bin: vendor-provided binary blob +* bl21.bin: built from vendor u-boot source +* bl30.bin: vendor-provided binary blob +* bl301.bin: built from vendor u-boot source +* bl31.bin: vendor-provided binary blob +* acs.bin: built from vendor u-boot source + +These binaries and the tools required below have been collected and prebuilt +for convenience at + +Download and extract the libretech-cc release from there, and set FIPDIR to +point to the `fip` subdirectory. + +.. code-block:: bash + + $ export FIPDIR=/path/to/extracted/fip + +Alternatively, you can obtain the original vendor u-boot tree which +contains the required blobs and sources, and build yourself. +Note that old compilers are required for this to build. The compilers here +are suggested by Amlogic, and they are 32-bit x86 binaries. + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot + $ cd amlogic-u-boot + $ make libretech_cc_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Once you have the binaries available (either through the prebuilt download, +or having built the vendor u-boot yourself), you can then proceed to glue +everything together. Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 + +Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no +source code. Should you prefer to avoid that, there are open source reverse +engineered versions available: + +1. gxlimg , which comes with a handy + Makefile that automates the whole process. +2. meson-tools + +However, these community-developed alternatives are not endorsed by or +supported by Amlogic. diff --git a/doc/board/amlogic/nanopi-k2.rst b/doc/board/amlogic/nanopi-k2.rst new file mode 100644 index 0000000000..1222ee4e85 --- /dev/null +++ b/doc/board/amlogic/nanopi-k2.rst @@ -0,0 +1,104 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for NanoPi-K2 +==================== + +NanoPi-K2 is a single board computer manufactured by FriendlyElec +with the following specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - Gigabit Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 2.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make nanopi-k2_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot + $ git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot + $ cd amlogic-u-boot + $ sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile + $ sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile + $ make nanopi-k2_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxb/bl2.bin fip/ + $ cp $FIPDIR/gxb/acs.bin fip/ + $ cp $FIPDIR/gxb/bl21.bin fip/ + $ cp $FIPDIR/gxb/bl30.bin fip/ + $ cp $FIPDIR/gxb/bl301.bin fip/ + $ cp $FIPDIR/gxb/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/fip_create \ + --bl30 fip/bl30_new.bin \ + --bl31 fip/bl31.img \ + --bl33 fip/bl33.bin \ + fip/fip.bin + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin + + $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ + --input fip/boot_new.bin + --output fip/u-boot.bin + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 diff --git a/board/amlogic/p200/README.odroid-c2 b/doc/board/amlogic/odroid-c2.rst similarity index 56% rename from board/amlogic/p200/README.odroid-c2 rename to doc/board/amlogic/odroid-c2.rst index 3b9f80df29..966c18b36e 100644 --- a/board/amlogic/p200/README.odroid-c2 +++ b/doc/board/amlogic/odroid-c2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0+ + U-Boot for ODROID-C2 ==================== @@ -16,50 +18,46 @@ Co. Ltd with the following specifications: Schematics are available on the manufacturer website. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-c2_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-c2_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > DIR=odroid-c2 - > git clone --depth 1 \ +.. code-block:: bash + + $ DIR=odroid-c2 + $ git clone --depth 1 \ https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ $DIR - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ + $ $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ --bl301 $DIR/fip/gxb/bl301.bin \ --bl31 $DIR/fip/gxb/bl31.bin \ --bl33 u-boot.bin \ $DIR/fip.bin - > $DIR/fip/fip_create --dump $DIR/fip.bin - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ + $ $DIR/fip/fip_create --dump $DIR/fip.bin + $ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin + $ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ --input $DIR/boot_new.bin \ --output $DIR/u-boot.img - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 + $ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 and then write the image to SD with: - > DEV=/dev/your_sd_device - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ BL1=$DIR/sd_fuse/bl1.bin.hardkernel + $ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 + $ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 + $ dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/doc/board/amlogic/odroid-n2.rst b/doc/board/amlogic/odroid-n2.rst new file mode 100644 index 0000000000..fe63113230 --- /dev/null +++ b/doc/board/amlogic/odroid-n2.rst @@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for ODROID-N2 +==================== + +ODROID-N2 is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC + - 4GB DDR4 SDRAM + - Gigabit Ethernet + - HDMI 2.1 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 3.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-n2_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + + $ DIR=odroid-n2 + $ git clone --depth 1 \ + https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \ + $DIR + + $ cd odroid-n2 + $ make odroidn2_defconfig + $ make + $ export UBOOTDIR=$PWD + + Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/p200.rst b/doc/board/amlogic/p200.rst new file mode 100644 index 0000000000..c3d6441fd3 --- /dev/null +++ b/doc/board/amlogic/p200.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic P200 +======================= + +P200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - Gigabit Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host + - eMMC, microSD + - Infrared receiver + - SDIO WiFi Module + - CVBS+Stereo Audio Jack + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p200_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxb_p200_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/p201.rst b/doc/board/amlogic/p201.rst new file mode 100644 index 0000000000..06da933a2a --- /dev/null +++ b/doc/board/amlogic/p201.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic P201 +======================= + +P201 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host + - eMMC, microSD + - Infrared receiver + - SDIO WiFi Module + - CVBS+Stereo Audio Jack + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p201_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxb_p201_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/p212.rst b/doc/board/amlogic/p212.rst new file mode 100644 index 0000000000..e2f3fe313b --- /dev/null +++ b/doc/board/amlogic/p212.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic P212 +======================= + +P212 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host + - eMMC, microSD + - Infrared receiver + - SDIO WiFi Module + - CVBS+Stereo Audio Jack + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p212_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxl_p212_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/q200.rst b/doc/board/amlogic/q200.rst new file mode 100644 index 0000000000..3ac4116be4 --- /dev/null +++ b/doc/board/amlogic/q200.rst @@ -0,0 +1,101 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic Q200 +======================= + +Q200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host, 1 x USB 2.0 Device + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - IR receiver + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim2_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxm_q200_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/s400.rst b/doc/board/amlogic/s400.rst new file mode 100644 index 0000000000..52c7b27332 --- /dev/null +++ b/doc/board/amlogic/s400.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic S400 +======================= + +S400 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz + - 1GB DDR4 SDRAM + - 10/100 Ethernet + - 2 x USB 2.0 Host + - eMMC + - Infrared receiver + - SDIO WiFi Module + - MIPI DSI Connector + - Audio HAT Connector + - PCI-E M.2 Connectors + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make s400_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make axg_s400_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/axg/bl2.bin fip/ + $ cp $FIPDIR/axg/acs.bin fip/ + $ cp $FIPDIR/axg/bl21.bin fip/ + $ cp $FIPDIR/axg/bl30.bin fip/ + $ cp $FIPDIR/axg/bl301.bin fip/ + $ cp $FIPDIR/axg/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/axg/aml_encrypt_axg --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/sei510.rst b/doc/board/amlogic/sei510.rst new file mode 100644 index 0000000000..2d296b1c3c --- /dev/null +++ b/doc/board/amlogic/sei510.rst @@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic SEI510 +========================= + +SEI510 is a customer board manufactured by SEI Robotics with the following +specifications: + + - Amlogic S905X2 ARM Cortex-A53 quad-core SoC + - 2GB DDR4 SDRAM + - 10/100 Ethernet (Internal PHY) + - 1 x USB 3.0 Host + - eMMC + - SDcard + - Infrared receiver + - SDIO WiFi Module + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make sei510_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + $ cd amlogic-u-boot + $ make g12a_u200_v1_defconfig + $ make + $ export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + $ cp $FIPDIR/g12a/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/piei.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/sei610.rst b/doc/board/amlogic/sei610.rst new file mode 100644 index 0000000000..9434e6f023 --- /dev/null +++ b/doc/board/amlogic/sei610.rst @@ -0,0 +1,133 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic SEI610 +========================= + +SEI610 is a customer board manufactured by SEI Robotics with the following +specifications: + + - Amlogic S905X3 ARM Cortex-A55 quad-core SoC + - 2GB DDR4 SDRAM + - 10/100 Ethernet (Internal PHY) + - 1 x USB 3.0 Host + - 1 x USB Type-C DRD + - 1 x FTDI USB Serial Debug Interface + - eMMC + - SDcard + - Infrared receiver + - SDIO WiFi Module + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make sei610_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-4.9-g12a-201904 amlogic-u-boot + $ cd amlogic-u-boot + $ make sm1_ac200_v1_defconfig + $ make + $ export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/buildroot-openlinux-A113-201901.tgz + $ tar xfz buildroot-openlinux-A113-201901.tgz buildroot-openlinux-A113-201901/bootloader + $ export BRDIR=$PWD/buildroot-openlinux-A113-201901 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +Go back to mainline U-Boot source tree then : + + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + $ cp $FIPDIR/g12a/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/piei.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/u200.rst b/doc/board/amlogic/u200.rst new file mode 100644 index 0000000000..5aa3936c28 --- /dev/null +++ b/doc/board/amlogic/u200.rst @@ -0,0 +1,135 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic U200 +======================= + +U200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S905D2 ARM Cortex-A53 quad-core SoC + - 2GB DDR4 SDRAM + - 10/100 Ethernet (Internal PHY) + - 1 x USB 3.0 Host + - eMMC + - SDcard + - Infrared receiver + - SDIO WiFi Module + - MIPI DSI Connector + - Audio HAT Connector + - PCI-E M.2 Connector + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make u200_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + $ cd amlogic-u-boot + $ make g12a_u200_v1_defconfig + $ make + $ export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + $ cp $FIPDIR/g12a/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/piei.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/w400.rst b/doc/board/amlogic/w400.rst new file mode 100644 index 0000000000..38dbf52fb9 --- /dev/null +++ b/doc/board/amlogic/w400.rst @@ -0,0 +1,137 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic W400 +======================= + +U200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC + - 2GB DDR4 SDRAM + - 10/100 Ethernet (Internal PHY) + - 1 x USB 3.0 Host + - eMMC + - SDcard + - Infrared receiver + - SDIO WiFi Module + - MIPI DSI Connector + - Audio HAT Connector + - PCI-E M.2 Connector + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make w400_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + $ cd amlogic-u-boot + $ make g12b_w400_v1_defconfig + $ make + $ export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/ + $ cp $FIPDIR/g12b/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12b/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12b/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12b/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12b/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12b/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12b/piei.fw fip/ + $ cp $FIPDIR/g12b/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/index.rst b/doc/board/index.rst index 01b233f737..dc683f0acb 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -8,6 +8,7 @@ Board-specific doc actions/index AndesTech/index + amlogic/index atmel/index coreboot/index emulation/index