]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
configs/ls1046ardb_*: disable CONFIG_SPI_FLASH_USE_4K_SECTORS
authorMaciej Pijanowski <maciej.pijanowski@3mdeb.com>
Fri, 31 May 2019 20:30:58 +0000 (22:30 +0200)
committerPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Wed, 19 Jun 2019 07:24:57 +0000 (12:54 +0530)
With this setting enabled, the on-board QSPI cannot be
properly flashed. There are no error messages, but the simple
write / read / compare tests fail.

This is already disabled in the qspi and tfa defconfigs for the
LS1046ARDB platform.

Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Cc: piotr.krol@3mdeb.com
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
configs/ls1046ardb_emmc_defconfig
configs/ls1046ardb_qspi_spl_defconfig
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
configs/ls1046ardb_sdcard_defconfig

index 63f6588d2b8a7a31a5a9d4e3ad8cb6463cc5afee..855edc726e46c6fdef6744cb1310de945b310d0c 100644 (file)
@@ -49,6 +49,7 @@ CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_E1000=y
index a4038b8d2975c4e0abd75ca59ea6bcc3909a25fb..6326c47cdbb5671ba134c8fc70b477d7f7ec340c 100644 (file)
@@ -52,6 +52,7 @@ CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
index 92afc919a5ebbc4b92ff12be8b2abf753ef05ebd..7bf23ad7fd609ef808389d8b0ad5830677f94053 100644 (file)
@@ -46,6 +46,7 @@ CONFIG_SPL_DM=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_E1000=y
index 9c124fd7e0a71e6875dfd584eac93130665963a2..829861b03b15673788a884372c5108ec3510080a 100644 (file)
@@ -48,6 +48,7 @@ CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_E1000=y