arm64: imx8mm: imx8mn: imx8mp: Drop FEC GPR[1] board workaround

The FEC interface mode is now configured in common board_interface_eth_init()
and called by FEC MAC driver when appropriate. Drop the board side duplicates
if the same functionality.

Signed-off-by: Marek Vasut <marex@denx.de>

diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 76f6c5541bded2c87c39e8b0f677542180861042..31c34b6031f6e37f86138999fbc4ce2026a56800 100644 (file)
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -875,53 +875,6 @@ static int imx8mp_eqos_interface_init(struct udevice *dev,
 #endif
 
 #ifdef CONFIG_FEC_MXC
-int set_clk_enet(enum enet_freq type)
-{
-       u32 target;
-       u32 enet1_ref;
-
-       switch (type) {
-       case ENET_125MHZ:
-               enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
-               break;
-       case ENET_50MHZ:
-               enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
-               break;
-       case ENET_25MHZ:
-               enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
-               break;
-       default:
-               return -EINVAL;
-       }
-
-       /* disable the clock first */
-       clock_enable(CCGR_ENET1, 0);
-       clock_enable(CCGR_SIM_ENET, 0);
-
-       /* set enet axi clock 266Mhz */
-       target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
-                CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
-                CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
-       clock_set_target_val(ENET_AXI_CLK_ROOT, target);
-
-       target = CLK_ROOT_ON | enet1_ref |
-                CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
-                CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
-       clock_set_target_val(ENET_REF_CLK_ROOT, target);
-
-       target = CLK_ROOT_ON |
-               ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
-               CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
-               CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
-       clock_set_target_val(ENET_TIMER_CLK_ROOT, target);
-
-       /* enable clock */
-       clock_enable(CCGR_SIM_ENET, 1);
-       clock_enable(CCGR_ENET1, 1);
-
-       return 0;
-}
-
 static int imx8mp_fec_interface_init(struct udevice *dev,
                                     phy_interface_t interface_type,
                                     bool mx8mp)

diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
index de0f3698297ce03123272ae930b520eeda4d06cc..760ea4be35c779d69e8564aabec97ad78e01a221 100644 (file)
--- a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
+++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
@@ -41,17 +41,6 @@ int board_phys_sdram_size(phys_size_t *size)
        return 0;
 }
 
-static void setup_fec(void)
-{
-       struct iomuxc_gpr_base_regs *gpr =
-               (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
-
-       /* Enable RGMII TX clk output. */
-       setbits_le32(&gpr->gpr[1], BIT(22));
-
-       set_clk_enet(ENET_125MHZ);
-}
-
 static int dh_imx8_setup_ethaddr(void)
 {
        unsigned char enetaddr[6];
@@ -118,7 +107,6 @@ int dh_setup_mac_address(void)
 
 int board_init(void)
 {
-       setup_fec();
        return 0;
 }
 

diff --git a/board/engicam/imx8mm/icore_mx8mm.c b/board/engicam/imx8mm/icore_mx8mm.c
index 4f7c699d7d1ac664e5ed952f74af3638ac51404c..320388faae3e074ab956d1ddce13c0bd139c0ab3 100644 (file)
--- a/board/engicam/imx8mm/icore_mx8mm.c
+++ b/board/engicam/imx8mm/icore_mx8mm.c
@@ -29,7 +29,7 @@ static iomux_v3_cfg_t const fec1_rst_pads[] = {
        IMX8MM_PAD_NAND_DATA01_GPIO3_IO7 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-static void setup_iomux_fec(void)
+static void setup_fec(void)
 {
        imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
                                         ARRAY_SIZE(fec1_rst_pads));
@@ -40,19 +40,6 @@ static void setup_iomux_fec(void)
        gpio_direction_output(FEC_RST_PAD, 1);
 }
 
-static int setup_fec(void)
-{
-       struct iomuxc_gpr_base_regs *gpr =
-               (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
-
-       setup_iomux_fec();
-
-       /* Use 125M anatop REF_CLK1 for ENET1, not from external */
-       clrsetbits_le32(&gpr->gpr[1], 13, 0);
-
-       return set_clk_enet(ENET_125MHZ);
-}
-
 int board_phy_config(struct phy_device *phydev)
 {
        /* enable rgmii rxc skew and phy mode select to RGMII copper */

diff --git a/board/kontron/pitx_imx8m/pitx_imx8m.c b/board/kontron/pitx_imx8m/pitx_imx8m.c
index af1832c47368e84927be3d893bbe1e320f2ebc1c..fcda86bc1b1c1e207e32423971629aab699713b7 100644 (file)
--- a/board/kontron/pitx_imx8m/pitx_imx8m.c
+++ b/board/kontron/pitx_imx8m/pitx_imx8m.c
@@ -92,24 +92,12 @@ static iomux_v3_cfg_t const fec1_rst_pads[] = {
        IMX8MQ_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-static void setup_iomux_fec(void)
+static void setup_fec(void)
 {
        imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
                                         ARRAY_SIZE(fec1_rst_pads));
 }
 
-static int setup_fec(void)
-{
-       struct iomuxc_gpr_base_regs *gpr =
-               (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
-
-       setup_iomux_fec();
-
-       /* Use 125M anatop REF_CLK1 for ENET1, not from external */
-       clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0);
-       return set_clk_enet(ENET_125MHZ);
-}
-
 int board_phy_config(struct phy_device *phydev)
 {
        unsigned int val;