x86: edison: Switch to DM_USB_GADGET

DM is the modern default approach for the drivers in U-Boot.
It also allows to configure code via Device Tree.

Move Intel Edison to use DM_USB_GADGET and drop hard coded values.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/arch/x86/cpu/tangier/Kconfig b/arch/x86/cpu/tangier/Kconfig
index 94d9d74a325c84e9a02d83313932a645792d42a9..19aaf165d6a3025d5740d1474f9449d002531f96 100644 (file)
--- a/arch/x86/cpu/tangier/Kconfig
+++ b/arch/x86/cpu/tangier/Kconfig
@@ -29,8 +29,4 @@ config SYS_CAR_SIZE
          Space in bytes in eSRAM used as Cache-As-RAM (CAR).
          Note this size must not exceed eSRAM's total size.
 
-config SYS_USB_OTG_BASE
-       hex
-       default 0xf9100000
-
 endif

diff --git a/arch/x86/dts/edison.dts b/arch/x86/dts/edison.dts
index 600d6d256246c86bbc3ad88756caf677d7ec13a9..8d245bffc2f3d2094da690994b7053cb5260ec57 100644 (file)
--- a/arch/x86/dts/edison.dts
+++ b/arch/x86/dts/edison.dts
@@ -107,6 +107,14 @@
 
        usb: usb@f9100000 {
                compatible = "intel,tangier-dwc3";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               dwc3: dwc3 {
+                       reg = <0xf9100000 0x100000>;
+                       maximum-speed = "high-speed";
+                       dr_mode = "peripheral";
+               };
        };
 
        watchdog: wdt@0 {

diff --git a/board/intel/edison/edison.c b/board/intel/edison/edison.c
index 652f9755155fd623bbe23a2d069893c77f889d55..11e7f74e47cca0c9733d698ad71eddcd77d03b76 100644 (file)
--- a/board/intel/edison/edison.c
+++ b/board/intel/edison/edison.c
@@ -3,15 +3,10 @@
  * Copyright (c) 2017 Intel Corporation
  */
 #include <common.h>
-#include <dwc3-uboot.h>
 #include <env.h>
 #include <init.h>
 #include <mmc.h>
 #include <u-boot/md5.h>
-#include <usb.h>
-#include <watchdog.h>
-
-#include <linux/usb/gadget.h>
 
 #include <asm/cache.h>
 #include <asm/pmu.h>
@@ -27,36 +22,6 @@ int board_early_init_r(void)
        return 0;
 }
 
-static struct dwc3_device dwc3_device_data = {
-       .maximum_speed = USB_SPEED_HIGH,
-       .base = CONFIG_SYS_USB_OTG_BASE,
-       .dr_mode = USB_DR_MODE_PERIPHERAL,
-       .index = 0,
-};
-
-int usb_gadget_handle_interrupts(int controller_index)
-{
-       dwc3_uboot_handle_interrupt(controller_index);
-       WATCHDOG_RESET();
-       return 0;
-}
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-       if (index == 0 && init == USB_INIT_DEVICE)
-               return dwc3_uboot_init(&dwc3_device_data);
-       return -EINVAL;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-       if (index == 0 && init == USB_INIT_DEVICE) {
-               dwc3_uboot_exit(index);
-               return 0;
-       }
-       return -EINVAL;
-}
-
 static void assign_serial(void)
 {
        struct mmc *mmc = find_mmc_device(0);

diff --git a/configs/edison_defconfig b/configs/edison_defconfig
index ab2811eca9dcdd5f576ecc6e5ad039591a3139b4..304a172a1b9f8fc6923dadaf740729798344d24e 100644 (file)
--- a/configs/edison_defconfig
+++ b/configs/edison_defconfig
@@ -37,6 +37,7 @@ CONFIG_DFU_TIMEOUT=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Intel"
 CONFIG_USB_GADGET_VENDOR_NUM=0x8087