board: pm9261: remove network support

The network support is removed because there is
no DM for Davicom DM9000.

Signed-off-by: Ilko Iliev <iliev@ronetix.at>

diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 5be2c5e192bbff5f5defeb72e0abeac25f033c76..fe52c7c1764fa2f3b5f7ec564d68adc0351c4c96 100644 (file)
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -20,10 +20,6 @@
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
-#include <net.h>
-#endif
-#include <netdev.h>
 #include <asm/mach-types.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -80,36 +76,6 @@ static void pm9261_nand_hw_init(void)
 }
 #endif
 
-
-#ifdef CONFIG_DRIVER_DM9000
-static void pm9261_dm9000_hw_init(void)
-{
-       struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
-
-       /* Configure SMC CS2 for DM9000 */
-       writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
-               AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
-               &smc->cs[2].setup);
-
-       writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) |
-               AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8),
-               &smc->cs[2].pulse);
-
-       writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16),
-               &smc->cs[2].cycle);
-
-       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-               AT91_SMC_MODE_EXNW_DISABLE |
-               AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
-               AT91_SMC_MODE_TDF_CYCLE(1),
-               &smc->cs[2].mode);
-
-       /* Configure Interrupt pin as input, no pull-up */
-       at91_periph_clk_enable(ATMEL_ID_PIOA);
-       at91_set_pio_input(AT91_PIO_PORTA, 24, 0);
-}
-#endif
-
 int board_early_init_f(void)
 {
        return 0;
@@ -132,13 +98,6 @@ int board_init(void)
        return 0;
 }
 
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(struct bd_info *bis)
-{
-       return dm9000_initialize(bis);
-}
-#endif
-
 int dram_init(void)
 {
        /* dram_init must store complete ramsize in gd->ram_size */
@@ -155,19 +114,6 @@ int dram_init_banksize(void)
        return 0;
 }
 
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-#ifdef CONFIG_DRIVER_DM9000
-       /*
-        * Initialize ethernet HW addr prior to starting Linux,
-        * needed for nfsroot
-        */
-       eth_init();
-#endif
-}
-#endif
-
 #ifdef CONFIG_DISPLAY_BOARDINFO
 int checkboard (void)
 {

diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig
index e0a2ae18c61b317ac1064be75bddda8132012e61..b27fc8dbc1a6f9ab0b823dc9c1607963ac82b245 100644 (file)
--- a/configs/pm9261_defconfig
+++ b/configs/pm9261_defconfig
@@ -25,8 +25,6 @@ CONFIG_SYS_PROMPT="pm9261> "
 CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
@@ -34,6 +32,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0x10040000
+# CONFIG_NET is not set
 CONFIG_DM=y
 CONFIG_BLK=y
 CONFIG_CLK=y
@@ -62,3 +61,4 @@ CONFIG_USB_STORAGE=y
 CONFIG_DM_VIDEO=y
 # CONFIG_VIDEO_BPP32 is not set
 CONFIG_LCD=y
+CONFIG_REGEX=y

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 2cc47d12379a40ca768bc192bdc4dd96ed508709..382d19a241b1bd0ecf5df5ad9c4fbde680a6c443 100644 (file)
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -173,15 +173,6 @@
 #define CONFIG_SYS_MAX_FLASH_SECT              256
 #define CONFIG_SYS_MAX_FLASH_BANKS             1
 
-/* Ethernet */
-#define CONFIG_DRIVER_DM9000                   1
-#define CONFIG_DM9000_BASE                     0x30000000
-#define DM9000_IO                              CONFIG_DM9000_BASE
-#define DM9000_DATA                            (CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT                        1
-#define CONFIG_NET_RETRY_COUNT                 20
-#define CONFIG_RESET_PHY_R                     1
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB