]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARM: rmobile: Update E2 Silk
authorMarek Vasut <marek.vasut+renesas@gmail.com>
Sat, 21 Apr 2018 14:19:56 +0000 (16:19 +0200)
committerMarek Vasut <marek.vasut+renesas@gmail.com>
Sat, 21 Apr 2018 16:33:31 +0000 (18:33 +0200)
The E2 Silk port was broken since some time. This patch updates
the E2 Silk port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
NOTE: The port is missing support for I2C1 for DA9063 reset, since the
      I2C driver needs to be converted to DM and DT probing. That's not
      an issue for this patch though, since the reset was broken on Silk
      since forever.

arch/arm/dts/r8a7794-silk-u-boot.dts
arch/arm/mach-rmobile/Kconfig.32
board/renesas/silk/Makefile
board/renesas/silk/silk.c
board/renesas/silk/silk_spl.c [new file with mode: 0644]
configs/silk_defconfig
include/configs/silk.h

index 435cbc1f6593b61e93a0325c9189ff6c8a77ef4d..dcd954e04acd38236eb20eebf1121a11c13579f8 100644 (file)
@@ -8,3 +8,7 @@
 
 #include "r8a7794-silk.dts"
 #include "r8a7794-u-boot.dtsi"
+
+&scif2 {
+       u-boot,dm-pre-reloc;
+};
index fe123f86ef10035f14ceeb3598027adc4214e57c..a8835f6571cefeb2430430b5324c37828fca5140 100644 (file)
@@ -68,6 +68,9 @@ config TARGET_SILK
        bool "Silk board"
        select DM
        select DM_SERIAL
+       select SUPPORT_SPL
+       select USE_TINY_PRINTF
+       select SPL_TINY_MEMSET
 
 config TARGET_PORTER
        bool "Porter board"
index 8916a8d961a434ee3c8155aa92aff734f48fe8a8..b5c3ad8d93439cf5efe4af3d13166c62cb4ee60d 100644 (file)
@@ -7,4 +7,8 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 
-obj-y  := silk.o qos.o ../rcar-common/common.o
+ifdef CONFIG_SPL_BUILD
+obj-y  := silk_spl.o
+else
+obj-y  := silk.o qos.o
+endif
index 9e2080bcea333badb1b841bb37282d07f6bcc06b..bfe9909dafea6e7ed144ce05886031772e0812e8 100644 (file)
@@ -30,7 +30,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define CLK2MHZ(clk)   (clk / 1000 / 1000)
 void s_init(void)
 {
        struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
@@ -44,150 +43,65 @@ void s_init(void)
        qos_init();
 }
 
-#define TMU0_MSTP125   (1 << 25)
-#define SCIF2_MSTP719  (1 << 19)
-#define ETHER_MSTP813  (1 << 13)
-#define IIC1_MSTP323   (1 << 23)
-#define MMC0_MSTP315   (1 << 15)
-#define SDHI1_MSTP312  (1 << 12)
+#define TMU0_MSTP125   BIT(25)
+#define MMC0_MSTP315   BIT(15)
 
 #define SD1CKCR                0xE6150078
-#define SD1_97500KHZ   0x7
+#define SD_97500KHZ    0x7
 
 int board_early_init_f(void)
 {
        /* TMU */
        mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
 
-       /* SCIF2 */
-       mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+       /* Set SD1 to the 97.5MHz */
+       writel(SD_97500KHZ, SD1CKCR);
 
-       /* ETHER */
-       mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
-
-       /* IIC1 / sh-i2c ch1 */
-       mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
-
-#ifdef CONFIG_SH_MMCIF
-       /* MMC */
-       mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
-#endif
-
-#ifdef CONFIG_SH_SDHI
-       /* SDHI1 */
-       mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI1_MSTP312);
-
-       /*
-        * Set SD1 to the 97.5MHz
-        */
-       writel(SD1_97500KHZ, SD1CKCR);
-#endif
        return 0;
 }
 
-/* LSI pin pull-up control */
-#define PUPR3          0xe606010C
-#define PUPR3_ETH      0x006FF800
-#define PUPR1          0xe6060104
-#define PUPR1_DREQ0_N  (1 << 20)
+#define ETHERNET_PHY_RESET     56      /* GPIO 1 24 */
+
 int board_init(void)
 {
        /* adress of boot parameters */
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-       /* Init PFC controller */
-       r8a7794_pinmux_init();
-
-       /* Ether Enable */
-       gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
-       gpio_request(GPIO_FN_ETH_RX_ER, NULL);
-       gpio_request(GPIO_FN_ETH_RXD0, NULL);
-       gpio_request(GPIO_FN_ETH_RXD1, NULL);
-       gpio_request(GPIO_FN_ETH_LINK, NULL);
-       gpio_request(GPIO_FN_ETH_REFCLK, NULL);
-       gpio_request(GPIO_FN_ETH_MDIO, NULL);
-       gpio_request(GPIO_FN_ETH_TXD1, NULL);
-       gpio_request(GPIO_FN_ETH_TX_EN, NULL);
-       gpio_request(GPIO_FN_ETH_MAGIC, NULL);
-       gpio_request(GPIO_FN_ETH_TXD0, NULL);
-       gpio_request(GPIO_FN_ETH_MDC, NULL);
-       gpio_request(GPIO_FN_IRQ8, NULL);
-
-       /* PHY reset */
-       mstp_clrbits_le32(PUPR3, PUPR3, PUPR3_ETH);
-       gpio_request(GPIO_GP_1_24, NULL);
-       mstp_clrbits_le32(PUPR1, PUPR1, PUPR1_DREQ0_N);
-
-       gpio_direction_output(GPIO_GP_1_24, 0);
+       /* Force ethernet PHY out of reset */
+       gpio_request(ETHERNET_PHY_RESET, "phy_reset");
+       gpio_direction_output(ETHERNET_PHY_RESET, 0);
        mdelay(20);
-       gpio_set_value(GPIO_GP_1_24, 1);
+       gpio_direction_output(ETHERNET_PHY_RESET, 1);
        udelay(1);
 
        return 0;
 }
 
-#define CXR24 0xEE7003C0 /* MAC address high register */
-#define CXR25 0xEE7003C8 /* MAC address low register */
-int board_eth_init(bd_t *bis)
+int dram_init(void)
 {
-#ifdef CONFIG_SH_ETHER
-       int ret = -ENODEV;
-       u32 val;
-       unsigned char enetaddr[6];
+       if (fdtdec_setup_memory_size() != 0)
+               return -EINVAL;
 
-       ret = sh_eth_initialize(bis);
-       if (!eth_env_get_enetaddr("ethaddr", enetaddr))
-               return ret;
-
-       /* Set Mac address */
-       val = enetaddr[0] << 24 | enetaddr[1] << 16 |
-               enetaddr[2] << 8 | enetaddr[3];
-       writel(val, CXR24);
-
-       val = enetaddr[4] << 8 | enetaddr[5];
-       writel(val, CXR25);
-
-       return ret;
-#else
        return 0;
-#endif
 }
 
-int board_mmc_init(bd_t *bis)
+int dram_init_banksize(void)
 {
-       int ret = -ENODEV;
-
-#ifdef CONFIG_SH_MMCIF
-       /* MMC0 */
-       gpio_request(GPIO_GP_4_31, NULL);
-       gpio_direction_output(GPIO_GP_4_31, 1);
-
-       ret = mmcif_mmc_init();
-#endif
-
-#ifdef CONFIG_SH_SDHI
-       gpio_request(GPIO_FN_SD1_DATA0, NULL);
-       gpio_request(GPIO_FN_SD1_DATA1, NULL);
-       gpio_request(GPIO_FN_SD1_DATA2, NULL);
-       gpio_request(GPIO_FN_SD1_DATA3, NULL);
-       gpio_request(GPIO_FN_SD1_CLK, NULL);
-       gpio_request(GPIO_FN_SD1_CMD, NULL);
-       gpio_request(GPIO_FN_SD1_CD, NULL);
-
-       /* SDHI 1 */
-       gpio_request(GPIO_GP_4_26, NULL);
-       gpio_request(GPIO_GP_4_29, NULL);
-       gpio_direction_output(GPIO_GP_4_26, 1);
-       gpio_direction_output(GPIO_GP_4_29, 1);
-
-       ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
-#endif
-       return ret;
+       fdtdec_setup_memory_banksize();
+
+       return 0;
 }
 
-int dram_init(void)
+/* porter has KSZ8041RNLI */
+#define PHY_CONTROL1           0x1E
+#define PHY_LED_MODE           0xC0000
+#define PHY_LED_MODE_ACK       0x4000
+int board_phy_config(struct phy_device *phydev)
 {
-       gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+       int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1);
+       ret &= ~PHY_LED_MODE;
+       ret |= PHY_LED_MODE_ACK;
+       ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret);
 
        return 0;
 }
@@ -198,22 +112,38 @@ const struct rmobile_sysinfo sysinfo = {
 
 void reset_cpu(ulong addr)
 {
-       u8 val;
+       struct udevice *dev;
+       const u8 pmic_bus = 1;
+       const u8 pmic_addr = 0x58;
+       u8 data;
+       int ret;
+
+       ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev);
+       if (ret)
+               hang();
+
+       ret = dm_i2c_read(dev, 0x13, &data, 1);
+       if (ret)
+               hang();
 
-       i2c_set_bus_num(1); /* PowerIC connected to ch1 */
-       i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
-       val |= 0x02;
-       i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+       data |= BIT(1);
+
+       ret = dm_i2c_write(dev, 0x13, &data, 1);
+       if (ret)
+               hang();
 }
 
-static const struct sh_serial_platdata serial_platdata = {
-       .base = SCIF2_BASE,
-       .type = PORT_SCIF,
-       .clk = 14745600,
-       .clk_mode = EXT_CLK,
-};
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+       const u32 load_magic = 0xb33fc0de;
 
-U_BOOT_DEVICE(silk_serials) = {
-       .name = "serial_sh",
-       .platdata = &serial_platdata,
-};
+       /* Block environment access if loaded using JTAG */
+       if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) &&
+           (op != ENVOP_INIT))
+               return ENVL_UNKNOWN;
+
+       if (prio)
+               return ENVL_UNKNOWN;
+
+       return ENVL_SPI_FLASH;
+}
diff --git a/board/renesas/silk/silk_spl.c b/board/renesas/silk/silk_spl.c
new file mode 100644 (file)
index 0000000..5309ce9
--- /dev/null
@@ -0,0 +1,425 @@
+/*
+ * board/renesas/silk/silk_spl.c
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <dm/platform_data/serial_sh.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+
+#include <spl.h>
+
+#define TMU0_MSTP125   BIT(25)
+#define SCIF2_MSTP719  BIT(19)
+#define QSPI_MSTP917   BIT(17)
+
+#define SD1CKCR                0xE6150078
+#define SD_97500KHZ    0x7
+
+struct reg_config {
+       u16     off;
+       u32     val;
+};
+
+static void dbsc_wait(u16 reg)
+{
+       static const u32 dbsc3_0_base = DBSC3_0_BASE;
+
+       while (!(readl(dbsc3_0_base + reg) & BIT(0)))
+               ;
+}
+
+static void spl_init_sys(void)
+{
+       u32 r0 = 0;
+
+       writel(0xa5a5a500, 0xe6020004);
+       writel(0xa5a5a500, 0xe6030004);
+
+       asm volatile(
+               /* ICIALLU - Invalidate I$ to PoU */
+               "mcr    15, 0, %0, cr7, cr5, 0  \n"
+               /* BPIALL - Invalidate branch predictors */
+               "mcr    15, 0, %0, cr7, cr5, 6  \n"
+               /* Set SCTLR[IZ] */
+               "mrc    15, 0, %0, cr1, cr0, 0  \n"
+               "orr    %0, #0x1800             \n"
+               "mcr    15, 0, %0, cr1, cr0, 0  \n"
+               "isb    sy                      \n"
+               :"=r"(r0));
+}
+
+static void spl_init_pfc(void)
+{
+       static const struct reg_config pfc_with_unlock[] = {
+               { 0x0090, 0x00018040 },
+               { 0x0094, 0x00000000 },
+               { 0x0098, 0x00000000 },
+               { 0x0020, 0x94000000 },
+               { 0x0024, 0x00000006 },
+               { 0x0028, 0x40000000 },
+               { 0x002c, 0x00000155 },
+               { 0x0030, 0x00000002 },
+               { 0x0034, 0x00000000 },
+               { 0x0038, 0x00000000 },
+               { 0x003c, 0x00000000 },
+               { 0x0040, 0x60000000 },
+               { 0x0044, 0x36dab6db },
+               { 0x0048, 0x926da012 },
+               { 0x004c, 0x0008c383 },
+               { 0x0050, 0x00000000 },
+               { 0x0054, 0x00000140 },
+               { 0x0004, 0xffffffff },
+               { 0x0008, 0x00ec3fff },
+               { 0x000c, 0x5bffffff },
+               { 0x0010, 0x01bfe1ff },
+               { 0x0014, 0x5bffffff },
+               { 0x0018, 0x0f4b200f },
+               { 0x001c, 0x03ffffff },
+       };
+
+       static const struct reg_config pfc_without_unlock[] = {
+               { 0x0100, 0x00000000 },
+               { 0x0104, 0x4203fdf0 },
+               { 0x0108, 0x00000000 },
+               { 0x010c, 0x159007ff },
+               { 0x0110, 0x80000000 },
+               { 0x0114, 0x00de481f },
+               { 0x0118, 0x00000000 },
+       };
+
+       static const struct reg_config pfc_with_unlock2[] = {
+               { 0x0060, 0xffffffff },
+               { 0x0064, 0xfffff000 },
+               { 0x0068, 0x55555500 },
+               { 0x006c, 0xffffff00 },
+               { 0x0070, 0x00000000 },
+       };
+
+       static const u32 pfc_base = 0xe6060000;
+
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) {
+               writel(~pfc_with_unlock[i].val, pfc_base);
+               writel(pfc_with_unlock[i].val,
+                      pfc_base | pfc_with_unlock[i].off);
+       }
+
+       for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++)
+               writel(pfc_without_unlock[i].val,
+                      pfc_base | pfc_without_unlock[i].off);
+
+       for (i = 0; i < ARRAY_SIZE(pfc_with_unlock2); i++) {
+               writel(~pfc_with_unlock2[i].val, pfc_base);
+               writel(pfc_with_unlock2[i].val,
+                      pfc_base | pfc_with_unlock2[i].off);
+       }
+}
+
+static void spl_init_gpio(void)
+{
+       static const u16 gpio_offs[] = {
+               0x1000, 0x2000, 0x3000, 0x4000
+       };
+
+       static const struct reg_config gpio_set[] = {
+               { 0x2000, 0x24000000 },
+               { 0x4000, 0xa4000000 },
+               { 0x5000, 0x0084c000 },
+       };
+
+       static const struct reg_config gpio_clr[] = {
+               { 0x1000, 0x01000000 },
+               { 0x2000, 0x24000000 },
+               { 0x3000, 0x00000000 },
+               { 0x4000, 0xa4000000 },
+               { 0x5000, 0x00044380 },
+       };
+
+       static const u32 gpio_base = 0xe6050000;
+
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
+               writel(0, gpio_base | 0x20 | gpio_offs[i]);
+       writel(BIT(23), gpio_base | 0x5020);
+
+       for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
+               writel(0, gpio_base | 0x00 | gpio_offs[i]);
+       writel(BIT(23), gpio_base | 0x5000);
+
+       for (i = 0; i < ARRAY_SIZE(gpio_set); i++)
+               writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off);
+
+       for (i = 0; i < ARRAY_SIZE(gpio_clr); i++)
+               writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off);
+}
+
+static void spl_init_lbsc(void)
+{
+       static const struct reg_config lbsc_config[] = {
+               { 0x00, 0x00000020 },
+               { 0x08, 0x00002020 },
+               { 0x30, 0x2a103320 },
+               { 0x38, 0xff70ff70 },
+       };
+
+       static const u16 lbsc_offs[] = {
+               0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8
+       };
+
+       static const u32 lbsc_base = 0xfec00200;
+
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) {
+               writel(lbsc_config[i].val,
+                      lbsc_base | lbsc_config[i].off);
+               writel(lbsc_config[i].val,
+                      lbsc_base | (lbsc_config[i].off + 4));
+       }
+
+       for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++)
+               writel(0, lbsc_base | lbsc_offs[i]);
+}
+
+static void spl_init_dbsc(void)
+{
+       static const struct reg_config dbsc_config1[] = {
+               { 0x0018, 0x21000000 },
+               { 0x0018, 0x11000000 },
+               { 0x0018, 0x10000000 },
+               { 0x0280, 0x0000a55a },
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x80000000 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config2[] = {
+               { 0x0290, 0x00000006 },
+               { 0x02a0, 0x0005c000 },
+       };
+
+       static const struct reg_config dbsc_config3r2[] = {
+               { 0x0290, 0x0000000f },
+               { 0x02a0, 0x00181224 },
+       };
+
+       static const struct reg_config dbsc_config4[] = {
+               { 0x0290, 0x00000010 },
+               { 0x02a0, 0xf004649b },
+               { 0x0290, 0x00000061 },
+               { 0x02a0, 0x0000006d },
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x00000073 },
+               { 0x0020, 0x00000007 },
+               { 0x0024, 0x0f030a02 },
+               { 0x0030, 0x00000001 },
+               { 0x00b0, 0x00000000 },
+               { 0x0040, 0x00000009 },
+               { 0x0044, 0x00000007 },
+               { 0x0048, 0x00000000 },
+               { 0x0050, 0x00000009 },
+               { 0x0054, 0x000a0009 },
+               { 0x0058, 0x00000021 },
+               { 0x005c, 0x00000018 },
+               { 0x0060, 0x00000005 },
+               { 0x0064, 0x00000020 },
+               { 0x0068, 0x00000007 },
+               { 0x006c, 0x0000000a },
+               { 0x0070, 0x00000009 },
+               { 0x0074, 0x00000010 },
+               { 0x0078, 0x000000ae },
+               { 0x007c, 0x00140005 },
+               { 0x0080, 0x00050004 },
+               { 0x0084, 0x50213005 },
+               { 0x0088, 0x000c0000 },
+               { 0x008c, 0x00000200 },
+               { 0x0090, 0x00000040 },
+               { 0x0100, 0x00000001 },
+               { 0x00c0, 0x00020001 },
+               { 0x00c8, 0x20042004 },
+               { 0x0380, 0x00020003 },
+               { 0x0390, 0x0000001f },
+       };
+
+       static const struct reg_config dbsc_config5[] = {
+               { 0x0244, 0x00000011 },
+               { 0x0290, 0x00000003 },
+               { 0x02a0, 0x0300c4e1 },
+               { 0x0290, 0x00000023 },
+               { 0x02a0, 0x00fcb6d0 },
+               { 0x0290, 0x00000011 },
+               { 0x02a0, 0x1000040b },
+               { 0x0290, 0x00000012 },
+               { 0x02a0, 0x85589955 },
+               { 0x0290, 0x00000013 },
+               { 0x02a0, 0x1a852400 },
+               { 0x0290, 0x00000014 },
+               { 0x02a0, 0x300210b4 },
+               { 0x0290, 0x00000015 },
+               { 0x02a0, 0x00000b50 },
+               { 0x0290, 0x00000016 },
+               { 0x02a0, 0x00000006 },
+               { 0x0290, 0x00000017 },
+               { 0x02a0, 0x00000010 },
+               { 0x0290, 0x0000001a },
+               { 0x02a0, 0x910035c7 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config6[] = {
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x00000181 },
+               { 0x0018, 0x11000000 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config7[] = {
+               { 0x0290, 0x00000001 },
+               { 0x02a0, 0x0000fe01 },
+               { 0x0304, 0x00000000 },
+               { 0x00f4, 0x01004c20 },
+               { 0x00f8, 0x012c00be },
+               { 0x00e0, 0x00000140 },
+               { 0x00e4, 0x00081450 },
+               { 0x00e8, 0x00010000 },
+               { 0x0290, 0x00000004 },
+       };
+
+       static const struct reg_config dbsc_config8[] = {
+               { 0x0014, 0x00000001 },
+               { 0x0290, 0x00000010 },
+               { 0x02a0, 0xf00464db },
+               { 0x0010, 0x00000001 },
+               { 0x0280, 0x00000000 },
+       };
+
+       static const u32 dbsc3_0_base = DBSC3_0_BASE;
+       unsigned int i;
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++)
+               writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config2); i++)
+               writel(dbsc_config2[i].val, dbsc3_0_base | dbsc_config2[i].off);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config3r2); i++) {
+               writel(dbsc_config3r2[i].val,
+                       dbsc3_0_base | dbsc_config3r2[i].off);
+       }
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++)
+               writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off);
+
+       dbsc_wait(0x240);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++)
+               writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++)
+               writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++)
+               writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off);
+
+       dbsc_wait(0x2a0);
+
+       for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++)
+               writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off);
+
+}
+
+static void spl_init_qspi(void)
+{
+       mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917);
+
+       static const u32 qspi_base = 0xe6b10000;
+
+       writeb(0x08, qspi_base + 0x00);
+       writeb(0x00, qspi_base + 0x01);
+       writeb(0x06, qspi_base + 0x02);
+       writeb(0x01, qspi_base + 0x0a);
+       writeb(0x00, qspi_base + 0x0b);
+       writeb(0x00, qspi_base + 0x0c);
+       writeb(0x00, qspi_base + 0x0d);
+       writeb(0x00, qspi_base + 0x0e);
+
+       writew(0xe080, qspi_base + 0x10);
+
+       writeb(0xc0, qspi_base + 0x18);
+       writeb(0x00, qspi_base + 0x18);
+       writeb(0x00, qspi_base + 0x08);
+       writeb(0x48, qspi_base + 0x00);
+}
+
+void board_init_f(ulong dummy)
+{
+       mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+       mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+
+       /* Set SD1 to the 97.5MHz */
+       writel(SD_97500KHZ, SD1CKCR);
+
+       spl_init_sys();
+       spl_init_pfc();
+       spl_init_gpio();
+       spl_init_lbsc();
+       spl_init_dbsc();
+       spl_init_qspi();
+}
+
+void spl_board_init(void)
+{
+       /* UART clocks enabled and gd valid - init serial console */
+       preloader_console_init();
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+       const u32 jtag_magic = 0x1337c0de;
+       const u32 load_magic = 0xb33fc0de;
+
+       /*
+        * If JTAG probe sets special word at 0xe6300020, then it must
+        * put U-Boot into RAM and SPL will start it from RAM.
+        */
+       if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) {
+               printf("JTAG boot detected!\n");
+
+               while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic)
+                       ;
+
+               spl_boot_list[0] = BOOT_DEVICE_RAM;
+               spl_boot_list[1] = BOOT_DEVICE_NONE;
+
+               return;
+       }
+
+       /* Boot from SPI NOR with YMODEM UART fallback. */
+       spl_boot_list[0] = BOOT_DEVICE_SPI;
+       spl_boot_list[1] = BOOT_DEVICE_UART;
+       spl_boot_list[2] = BOOT_DEVICE_NONE;
+}
+
+void reset_cpu(ulong addr)
+{
+}
index 5538186ad7de9a98e6b536856a0669ecc49e5546..309935d08e3e184a5ddad411c8d08a9acb9a73fb 100644 (file)
@@ -1,17 +1,37 @@
 CONFIG_ARM=y
+CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_RMOBILE=y
-CONFIG_SYS_TEXT_BASE=0xE6304000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x50000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_R8A7794=y
 CONFIG_TARGET_SILK=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_DEFAULT_DEVICE_TREE="r8a7794-silk-u-boot"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_XIMG is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_SDRAM=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
@@ -19,22 +39,43 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_CLK=y
+CONFIG_CLK_RENESAS=y
+CONFIG_DM_GPIO=y
+CONFIG_RCAR_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_DM_MMC=y
 CONFIG_SH_MMCIF=y
+CONFIG_RENESAS_SDHI=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_MICREL=y
-CONFIG_NETDEVICES=y
+CONFIG_DM_ETH=y
 CONFIG_SH_ETHER=y
-CONFIG_BAUDRATE=38400
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_PFC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SH_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
index ba49c194db02775dd4e652925a8a539a93ec87ac..5f351b5c4b65b0246630088d6827084dd38e4f60 100644 (file)
 
 #include "rcar-gen2-common.h"
 
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR                0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR                0xE633FFFC
-#endif
-#define STACK_AREA_SIZE                        0xC000
+#define CONFIG_SYS_INIT_SP_ADDR                0x4f000000
+#define STACK_AREA_SIZE                        0x00100000
 #define LOW_LEVEL_MERAM_STACK \
                (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
 
 /* Board Clock */
 #define RMOBILE_XTAL_CLK       20000000u
 #define CONFIG_SYS_CLK_FREQ    RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ   (CONFIG_SYS_CLK_FREQ * 156 / 2)
-#define CONFIG_P_CLK_FREQ      (CONFIG_PLL1_CLK_FREQ / 24)
-
-#define CONFIG_SYS_TMU_CLK_DIV  4
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS      3
-#define CONFIG_SYS_I2C_SH_SPEED0       400000
-#define CONFIG_SYS_I2C_SH_SPEED1       400000
-#define CONFIG_SYS_I2C_SH_SPEED2       400000
-#define CONFIG_SH_I2C_DATA_HIGH                4
-#define CONFIG_SH_I2C_DATA_LOW         5
-#define CONFIG_SH_I2C_CLOCK            10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR    0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-
-/* MMCIF */
-#define CONFIG_SH_MMCIF_ADDR   0xee200000
-#define CONFIG_SH_MMCIF_CLK    48000000
-
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ    97500000
-
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA      0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA      0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA      0x00000180
-/* SCIF2 */
-#define CONFIG_SMSTP7_ENA      0x00080000
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
+
+#define CONFIG_SYS_TMU_CLK_DIV 4
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "fdt_high=0xffffffff\0"         \
+       "initrd_high=0xffffffff\0"
+
+/* SPL support */
+#define CONFIG_SPL_TEXT_BASE           0xe6300000
+#define CONFIG_SPL_STACK               0xe6340000
+#define CONFIG_SPL_MAX_SIZE            0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SH_SCIF_CLK_FREQ                65000000
+#endif
 
 #endif /* __SILK_H */