will build commits in us-buildman that are not in upstream/master.
+Building Faster
+===============
+
+By default, buildman executes 'make mrproper' prior to building the first
+commit for each board. This causes everything to be built from scratch. If you
+trust the build system's incremental build capabilities, you can pass the -I
+flag to skip the 'make mproper' invocation, which will reduce the amount of
+work 'make' does, and hence speed up the build. This flag will speed up any
+buildman invocation, since it reduces the amount of work done on any build.
+
+One possible application of buildman is as part of a continual edit, build,
+edit, build, ... cycle; repeatedly applying buildman to the same change or
+series of changes while making small incremental modifications to the source
+each time. This provides quick feedback regarding the correctness of recent
+modifications. In this scenario, buildman's default choice of build directory
+causes more build work to be performed than strictly necessary.
+
+By default, each buildman thread uses a single directory for all builds. When a
+thread builds multiple boards, the configuration built in this directory will
+cycle through various different configurations, one per board built by the
+thread. Variations in the configuration will force a rebuild of affected source
+files when a thread switches between boards. Ideally, such buildman-induced
+rebuilds would not happen, thus allowing the build to operate as efficiently as
+the build system and source changes allow. buildman's -P flag may be used to
+enable this; -P causes each board to be built in a separate (board-specific)
+directory, thus avoiding any buildman-induced configuration changes in any
+build directory.
+
+U-Boot's build system embeds information such as a build timestamp into the
+final binary. This information varies each time U-Boot is built. This causes
+various files to be rebuilt even if no source changes are made, which in turn
+requires that the final U-Boot binary be re-linked. This unnecessary work can
+be avoided by turning off the timestamp feature. This can be achieved by
+setting the SOURCE_DATE_EPOCH environment variable to 0.
+
+Combining all of these options together yields the command-line shown below.
+This will provide the quickest possible feedback regarding the current content
+of the source tree, thus allowing rapid tested evolution of the code.
+
+ SOURCE_DATE_EPOCH=0 ./tools/buildman/buildman -I -P tegra
+
+
Other options
=============
def __init__(self, toolchains, base_dir, git_dir, num_threads, num_jobs,
gnu_make='make', checkout=True, show_unknown=True, step=1,
- no_subdirs=False, full_path=False, verbose_build=False):
+ no_subdirs=False, full_path=False, verbose_build=False,
+ incremental=False, per_board_out_dir=False):
"""Create a new Builder object
Args:
full_path: Return the full path in CROSS_COMPILE and don't set
PATH
verbose_build: Run build with V=1 and don't use 'make -s'
+ incremental: Always perform incremental builds; don't run make
+ mrproper when configuring
+ per_board_out_dir: Build in a separate persistent directory per
+ board rather than a thread-specific directory
"""
self.toolchains = toolchains
self.base_dir = base_dir
self.queue = Queue.Queue()
self.out_queue = Queue.Queue()
for i in range(self.num_threads):
- t = builderthread.BuilderThread(self, i)
+ t = builderthread.BuilderThread(self, i, incremental,
+ per_board_out_dir)
t.setDaemon(True)
t.start()
self.threads.append(t)
thread_num: Our thread number (0-n-1), used to decide on a
temporary directory
"""
- def __init__(self, builder, thread_num):
+ def __init__(self, builder, thread_num, incremental, per_board_out_dir):
"""Set up a new builder thread"""
threading.Thread.__init__(self)
self.builder = builder
self.thread_num = thread_num
+ self.incremental = incremental
+ self.per_board_out_dir = per_board_out_dir
def Make(self, commit, brd, stage, cwd, *args, **kwargs):
"""Run 'make' on a particular commit and board.
if self.builder.in_tree:
out_dir = work_dir
else:
- out_dir = os.path.join(work_dir, 'build')
+ if self.per_board_out_dir:
+ out_rel_dir = os.path.join('..', brd.target)
+ else:
+ out_rel_dir = 'build'
+ out_dir = os.path.join(work_dir, out_rel_dir)
# Check if the job was already completed last time
done_file = self.builder.GetDoneFile(commit_upto, brd.target)
#
# Symlinks can confuse U-Boot's Makefile since
# we may use '..' in our path, so remove them.
- work_dir = os.path.realpath(work_dir)
- args.append('O=%s/build' % work_dir)
+ out_dir = os.path.realpath(out_dir)
+ args.append('O=%s' % out_dir)
cwd = None
src_dir = os.getcwd()
else:
- args.append('O=build')
+ args.append('O=%s' % out_rel_dir)
if self.builder.verbose_build:
args.append('V=1')
else:
# If we need to reconfigure, do that now
if do_config:
- result = self.Make(commit, brd, 'mrproper', cwd,
- 'mrproper', *args, env=env)
- config_out = result.combined
+ config_out = ''
+ if not self.incremental:
+ result = self.Make(commit, brd, 'mrproper', cwd,
+ 'mrproper', *args, env=env)
+ config_out += result.combined
result = self.Make(commit, brd, 'config', cwd,
*(args + config_args), env=env)
config_out += result.combined
parser.add_option('-i', '--in-tree', dest='in_tree',
action='store_true', default=False,
help='Build in the source tree instead of a separate directory')
+ parser.add_option('-I', '--incremental', action='store_true',
+ default=False, help='Do not run make mrproper (when reconfiguring)')
parser.add_option('-j', '--jobs', dest='jobs', type='int',
default=None, help='Number of jobs to run at once (passed to make)')
parser.add_option('-k', '--keep-outputs', action='store_true',
default=False, help='Do a rough build, with limited warning resolution')
parser.add_option('-p', '--full-path', action='store_true',
default=False, help="Use full toolchain path in CROSS_COMPILE")
+ parser.add_option('-P', '--per-board-out-dir', action='store_true',
+ default=False, help="Use an O= (output) directory per board rather than per thread")
parser.add_option('-s', '--summary', action='store_true',
default=False, help='Show a build summary')
parser.add_option('-S', '--show-sizes', action='store_true',
options.threads, options.jobs, gnu_make=gnu_make, checkout=True,
show_unknown=options.show_unknown, step=options.step,
no_subdirs=options.no_subdirs, full_path=options.full_path,
- verbose_build=options.verbose_build)
+ verbose_build=options.verbose_build,
+ incremental=options.incremental,
+ per_board_out_dir=options.per_board_out_dir,)
builder.force_config_on_failure = not options.quick
if make_func:
builder.do_make = make_func
projects / u-boot.git / commitdiff