armv8: ls1088a: change dpl load command from apply to lazyapply

use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr"

change dpl load addr to 0x80001000 from 0x80200000 because dpl gets
corrupted at 0x80200000 during bootm command excecution.

Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 137a18121744d1fef9beafadef4b895d2508ab44..df81be1971e4156c19e7fe5bd4652c9a4edbefa5 100644 (file)
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -195,17 +195,17 @@ unsigned long long get_qixis_addr(void);
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND     "sf probe 0:0;" \
-                               "sf read 0x80200000 0xd00000 0x100000;"\
-                               " fsl_mc apply dpl 0x80200000 &&" \
+                               "sf read 0x80001000 0xd00000 0x100000;"\
+                               " fsl_mc lazyapply dpl 0x80001000 &&" \
                                " sf read $kernel_load $kernel_start" \
                                " $kernel_size && bootm $kernel_load"
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND     "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
-                               " fsl_mc apply dpl 0x80200000 &&" \
+#define CONFIG_BOOTCOMMAND     "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
+                               " fsl_mc lazyapply dpl 0x80001000 &&" \
                                " mmc read $kernel_load $kernel_start" \
                                " $kernel_size && bootm $kernel_load"
 #else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580d00000 &&" \
+#define CONFIG_BOOTCOMMAND     "fsl_mc lazyapply dpl 0x580d00000 &&" \
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
 #endif

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 4459994eb4365706624c3880fad9d50251edf992..d0ab2fa39e8d3ad64e808db8f7d9a326149a72e5 100644 (file)
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -381,8 +381,8 @@
        "installer=load mmc 0:2 $load_addr "                    \
                "/flex_installer_arm64.itb; "                   \
                "env exists mcinitcmd && run mcinitcmd && "     \
-               "mmc read 0x80200000 0x6800 0x800;"             \
-               "fsl_mc apply dpl 0x80200000;"                  \
+               "mmc read 0x80001000 0x6800 0x800;"             \
+               "fsl_mc lazyapply dpl 0x80001000;"                      \
                "bootm $load_addr#ls1088ardb\0"                 \
        "qspi_bootcmd=echo Trying load from qspi..;"            \
                "sf probe && sf read $load_addr "               \
@@ -402,11 +402,11 @@
 #if defined(CONFIG_QSPI_BOOT)
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND                                      \
-               "sf read 0x80200000 0xd00000 0x100000;"         \
+               "sf read 0x80001000 0xd00000 0x100000;"         \
                "env exists mcinitcmd && env exists secureboot "        \
                " && sf read 0x80780000 0x780000 0x100000 "     \
                "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
-               "&& fsl_mc apply dpl 0x80200000;"               \
+               "&& fsl_mc lazyapply dpl 0x80001000;"           \
                "run distro_bootcmd;run qspi_bootcmd;"          \
                "env exists secureboot && esbc_halt;"
 
@@ -414,11 +414,11 @@
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_BOOTCOMMAND                                      \
                "env exists mcinitcmd && mmcinfo; "             \
-               "mmc read 0x80200000 0x6800 0x800; "            \
+               "mmc read 0x80001000 0x6800 0x800; "            \
                "env exists mcinitcmd && env exists secureboot "        \
                " && mmc read 0x80780000 0x3800 0x10 "          \
                "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
-               "&& fsl_mc apply dpl 0x80200000;"               \
+               "&& fsl_mc lazyapply dpl 0x80001000;"           \
                "run distro_bootcmd;run sd_bootcmd;"            \
                "env exists secureboot && esbc_halt;"
 #endif