i2c: Drop use of CONFIG_I2C_HARD

This option is pretty old. It predates CONFIG_SYS_I2C which is itself
deprecated in favour of driver model. Disable it for all boards.

Also drop I2C options which depend on this.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/README b/README
index 2ca0102b57b74f03106c33d20052d08ce9f5eac2..86f0814f7928676252a873e56996ac77f91c7e53 100644 (file)
--- a/README
+++ b/README
@@ -2213,22 +2213,9 @@ The following options need to be configured:
                - approved multibus support
                - better i2c mux support
 
-               ** Please consider updating your I2C driver now. **
+               ** CONFIG_HARD_I2C is now being removed **
 
-               These enable legacy I2C serial bus commands. Defining
-               CONFIG_HARD_I2C will include the appropriate I2C driver
-               for the selected CPU.
-
-               This will allow you to use i2c commands at the u-boot
-               command line (as long as you set CONFIG_CMD_I2C in
-               CONFIG_COMMANDS) and communicate with i2c based realtime
-               clock chips. See common/cmd_i2c.c for a description of the
-               command line interface.
-
-               CONFIG_HARD_I2C selects a hardware I2C controller.
-
-               There are several other quantities that must also be
-               defined when you define CONFIG_HARD_I2C.
+----under removal:
 
                In both cases you will need to define CONFIG_SYS_I2C_SPEED
                to be the frequency (in Hz) at which you wish your i2c bus

diff --git a/arch/arm/include/asm/arch-armada100/config.h b/arch/arm/include/asm/arch-armada100/config.h
index 6ebc759f4b9675c80c68d385e2698b03998dede5..113e1c73f3fd8f90e3ef9561ef1b4d60c720ba20 100644 (file)
--- a/arch/arm/include/asm/arch-armada100/config.h
+++ b/arch/arm/include/asm/arch-armada100/config.h
@@ -24,17 +24,5 @@
 #define MV_UART_CONSOLE_BASE   ARMD1_UART1_BASE
 #define CONFIG_SYS_NS16550_IER (1 << 6)        /* Bit 6 in UART_IER register
                                                represents UART Unit Enable */
-/*
- * I2C definition
- */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MV          1
-#define CONFIG_MV_I2C_NUM      2
-#define CONFIG_I2C_MULTI_BUS   1
-#define CONFIG_MV_I2C_REG      {0xd4011000, 0xd4025000}
-#define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   0
-#define CONFIG_SYS_I2C_SLAVE   0xfe
-#endif
 
 #endif /* _ARMD1_CONFIG_H */

diff --git a/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c b/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c
index 31418a1f961e3c6a6dc5c9fae00118cb9e83fa18..9205c22e0b5955d164a59dea820d8d58462d69f4 100644 (file)
--- a/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c
+++ b/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c
@@ -156,17 +156,7 @@ int board_init(void)
 
 int board_late_init(void)
 {
-       u8 mac[6];
-
-       /* Read Mac Address and set*/
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-       i2c_set_bus_num(CONFIG_SYS_I2C_MODULE);
-
-       /* Read MAC address */
-       i2c_read(0x50, 0x0, 0, mac, 6);
-
-       if (is_valid_ethaddr(mac))
-               eth_setenv_enetaddr("ethaddr", mac);
+       printf("Cannot use I2C to get MAC address\n");
 
        return 0;
 }

diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 7b862355c8d2a469cf3be71c8d964f685215ab5f..2f55191caf35bcd3807ee4ff67ca4f62065a649a 100644 (file)
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -161,14 +161,7 @@ int dram_init(void)
  */
 static void read_hw_id(hw_id_t hw_id)
 {
-       int i;
-       for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
-               if (i2c_read(CONFIG_SYS_I2C_EEPROM,
-                               hw_id_format[i].offset,
-                               2,
-                               (uchar *)&hw_id[i][0],
-                               hw_id_format[i].length) != 0)
-                       printf("ERROR: can't read HW ID from EEPROM\n");
+       printf("ERROR: can't read HW ID from EEPROM\n");
 }
 
 
@@ -221,7 +214,7 @@ static void compose_module_name(hw_id_t hw_id, char *buf)
        strcat(buf, tmp);
 }
 
-
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
 /*
  * Compose string with hostname.
  * buf is assumed to have enough space, and be null-terminated.
@@ -237,7 +230,7 @@ static void compose_hostname(hw_id_t hw_id, char *buf)
                *p = tolower(*p);
 
 }
-
+#endif
 
 #ifdef CONFIG_OF_BOARD_SETUP
 /*
@@ -270,15 +263,6 @@ int checkboard(void)
        hw_id_t hw_id_tmp;
        char module_name_tmp[MODULE_NAME_MAXLEN] = "";
 
-       /*
-        * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
-        * here despite the fact that it will be called again later on. We
-        * also use a little trick to silence I2C-related output.
-        */
-       gd->flags |= GD_FLG_SILENT;
-       i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-       gd->flags &= ~GD_FLG_SILENT;
-
        read_hw_id(hw_id_tmp);
        identify_module(hw_id_tmp);     /* this sets gd->board_type */
        compose_module_name(hw_id_tmp, module_name_tmp);
@@ -334,16 +318,16 @@ int misc_init_r(void)
                        " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
                        CONFIG_MAC_OFFSET);
        }
+       hostname[0] = 0x00;
+       /* set the hostname appropriate to the module we're running on */
+       compose_hostname(hw_id, hostname);
+       setenv("hostname", hostname);
+
 #endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) */
        if (!getenv("ethaddr"))
                printf(LOG_PREFIX "MAC address not set, networking is not "
                                        "operational\n");
 
-       /* set the hostname appropriate to the module we're running on */
-       hostname[0] = 0x00;
-       compose_hostname(hw_id, hostname);
-       setenv("hostname", hostname);
-
        return 0;
 }
 #endif /* CONFIG_MISC_INIT_R */

diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 9c40ad7b2a2c9fe885916529ab4e0e39090a9142..60097dc8c7d21a9c41f2cfbe07f793e2bc54b11d 100644 (file)
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -13,34 +13,6 @@
 
 #ifdef CONFIG_CMD_BSP
 
-static int do_i2c_test(char * const argv[])
-{
-       unsigned char temp, temp1;
-
-       printf("Starting I2C Test\n"
-               "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
-               "Please press any key to start\n\n");
-       getc();
-
-       temp = 0xf0; /* set io 0-4 as output */
-       i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
-
-       printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
-               "Press any key to stop\n\n");
-
-       while (!tstc()) {
-               i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
-               temp1 = (temp >> 4) & 0x03;
-               temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
-               temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
-               temp = temp1;
-               i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
-       }
-       getc();
-
-       return 0;
-}
-
 static int do_usb_test(char * const argv[])
 {
        int i;
@@ -387,9 +359,7 @@ static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
        switch (argc) {
        case 2:
-               if (strncmp(argv[1], "i2c", 3) == 0)
-                       rcode = do_i2c_test(argv);
-               else if (strncmp(argv[1], "led", 3) == 0)
+               if (strncmp(argv[1], "led", 3) == 0)
                        rcode = do_led_test(argv);
                else if (strncmp(argv[1], "usb", 3) == 0)
                        rcode = do_usb_test(argv);

diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c
index e3441cad4eda99e928c82eff26cd4e02c5e35486..e389819e9d642e243c0f79fef23ca77e203e37c9 100644 (file)
--- a/board/davedenx/aria/aria.c
+++ b/board/davedenx/aria/aria.c
@@ -29,9 +29,6 @@ int misc_init_r(void)
 {
        u32 tmp;
 
-       /* we use I2C-2 for on-board eeprom */
-       i2c_set_bus_num(2);
-
        tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE);
        printf("FPGA:  %u-%u.%u.%u\n",
                (tmp & 0xFF000000) >> 24,

diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
index 66dc407baeb616f6965d18094cf471935dd1af8e..78a6b66110144b348ac3204e287b664625a4cf5b 100644 (file)
--- a/board/esd/mecp5123/mecp5123.c
+++ b/board/esd/mecp5123/mecp5123.c
@@ -18,17 +18,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int eeprom_write_enable(unsigned dev_addr, int state)
 {
-       volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
-       if (dev_addr != CONFIG_SYS_I2C_EEPROM_ADDR)
-               return -1;
-
-       if (state == 0)
-               setbits_be32(&im->gpio.gpdat, 0x00100000);
-       else
-               clrbits_be32(&im->gpio.gpdat, 0x00100000);
-
-       return 0;
+       return -ENOSYS;
 }
 
 int board_early_init_f(void)

diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
index f87579f19372fa946d27438301397d86b64d6d11..d729056fd0fa145d8fe8133fa5fabe560502951d 100644 (file)
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -174,27 +174,6 @@ int dram_init(void)
 
 int misc_init_r(void)
 {
-       u8 tmp_val;
-
-       /* Using this for DIU init before the driver in linux takes over
-        *  Enable the TFP410 Encoder (I2C address 0x38)
-        */
-
-       i2c_set_bus_num(2);
-       tmp_val = 0xBF;
-       i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
-       /* Verify if enabled */
-       tmp_val = 0;
-       i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
-       debug("DVI Encoder Read: 0x%02x\n", tmp_val);
-
-       tmp_val = 0x10;
-       i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
-       /* Verify if enabled */
-       tmp_val = 0;
-       i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
-       debug("DVI Encoder Read: 0x%02x\n", tmp_val);
-
        return 0;
 }
 

diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c
index 348613736d3c068b0a794c249ae0367e87ca2d65..cd79e804a081390aecb4d2abe331bdb421027c37 100644 (file)
--- a/board/ifm/ac14xx/ac14xx.c
+++ b/board/ifm/ac14xx/ac14xx.c
@@ -17,7 +17,6 @@
 #include <i2c.h>
 #endif
 
-static int eeprom_diag;
 static int mac_diag;
 static int gpio_diag;
 
@@ -136,7 +135,6 @@ struct __attribute__ ((__packed__)) eeprom_layout {
 #define HW_COMP_MAINCPU 2
 
 static struct eeprom_layout eeprom_content;
-static int eeprom_was_read;    /* has_been_read */
 static int eeprom_is_valid;
 static int eeprom_version;
 
@@ -153,53 +151,7 @@ static int eeprom_version;
 
 static int read_eeprom(void)
 {
-       int eeprom_datalen;
-       int ret;
-
-       if (eeprom_was_read)
-               return 0;
-
-       eeprom_is_valid = 0;
-       ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
-                       CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
-                       (uchar *)&eeprom_content, sizeof(eeprom_content));
-       if (eeprom_diag) {
-               printf("DIAG: %s() read rc[%d], size[%d]\n",
-                       __func__, ret, sizeof(eeprom_content));
-       }
-
-       if (ret != 0)
-               return -1;
-
-       eeprom_was_read = 1;
-
-       /*
-        * check validity of EEPROM content
-        * (check version, length, optionally checksum)
-        */
-       eeprom_is_valid = 1;
-       eeprom_datalen = get_eeprom_field_int(eeprom_content.len);
-       eeprom_version = get_eeprom_field_int(eeprom_content.version);
-
-       if (eeprom_diag) {
-               printf("DIAG: %s() magic[%c%c%c] len[%d] ver[%d] type[%d]\n",
-                       __func__, eeprom_content.magic[0],
-                       eeprom_content.magic[1], eeprom_content.magic[2],
-                       eeprom_datalen, eeprom_version, eeprom_content.type);
-       }
-       if (strncmp(eeprom_content.magic, "ifm", strlen("ifm")) != 0)
-               eeprom_is_valid = 0;
-       if (eeprom_datalen < sizeof(struct eeprom_layout) - 5)
-               eeprom_is_valid = 0;
-       if ((eeprom_version != 1) && (eeprom_version != 2))
-               eeprom_is_valid = 0;
-       if (eeprom_content.type != HW_COMP_MAINCPU)
-               eeprom_is_valid = 0;
-
-       if (eeprom_diag)
-               printf("DIAG: %s() valid[%d]\n", __func__, eeprom_is_valid);
-
-       return ret;
+       return -ENOSYS;
 }
 
 int mac_read_from_eeprom(void)
@@ -324,9 +276,6 @@ int misc_init_r(void)
        char *s;
        int want_recovery;
 
-       /* we use bus I2C-0 for the on-board eeprom */
-       i2c_set_bus_num(0);
-
        /* setup GPIO directions and initial values */
        gpio_configure();
 

diff --git a/board/renesas/r0p7734/r0p7734.c b/board/renesas/r0p7734/r0p7734.c
index 360e0a1a6fd051443a47e66667ad30b564d24699..d0b453751333c314ddbc178cced1f16ed32752a6 100644 (file)
--- a/board/renesas/r0p7734/r0p7734.c
+++ b/board/renesas/r0p7734/r0p7734.c
@@ -44,17 +44,7 @@ int board_init(void)
 
 int board_late_init(void)
 {
-       u8 mac[6];
-
-       /* Read Mac Address and set*/
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-       i2c_set_bus_num(CONFIG_SYS_I2C_MODULE);
-
-       /* Read MAC address */
-       i2c_read(0x50, 0x10, 0, mac, 6);
-
-       if (is_valid_ethaddr(mac))
-               eth_setenv_enetaddr("ethaddr", mac);
+       printf("Cannot get MAC address from I2C\n");
 
        return 0;
 }

diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index 92db093dbf85b3ff7b80870a400d18cc73405ba2..c48ab11fc41922c19d481756295793ef6c52056f 100644 (file)
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -486,20 +486,14 @@ int board_early_init_f (void)
 
 static int tfp410_read_reg(int reg, uchar *buf)
 {
-       if (i2c_read(CONFIG_SYS_TFP410_ADDR, reg, 1, buf, 1) != 0) {
-               puts ("Error reading the chip.\n");
-               return 1;
-       }
-       return 0;
+       puts("Error reading the chip.\n");
+       return -ENOSYS;
 }
 
 static int tfp410_write_reg(int reg, uchar buf)
 {
-       if (i2c_write(CONFIG_SYS_TFP410_ADDR, reg, 1, &buf, 1) != 0) {
-               puts ("Error writing the chip.\n");
-               return 1;
-       }
-       return 0;
+       puts("Error writing the chip.\n");
+       return -ENOSYS;
 }
 
 typedef struct _tfp410_config {
@@ -525,12 +519,9 @@ static int charon_last_stage_init(void)
 {
        volatile struct mpc5xxx_lpb *lpb =
                (struct mpc5xxx_lpb *) MPC5XXX_LPB;
-       int     oldbus = i2c_get_bus_num();
        uchar   buf;
        int     i = 0;
 
-       i2c_set_bus_num(CONFIG_SYS_TFP410_BUS);
-
        /* check version */
        if (tfp410_read_reg(TFP410_REG_DEV_ID_H, &buf) != 0)
                return -1;
@@ -551,7 +542,6 @@ static int charon_last_stage_init(void)
                i++;
        }
        printf("TFP410 initialized.\n");
-       i2c_set_bus_num(oldbus);
 
        /* set deadcycle for cs3 to 0 */
        setbits_be32(&lpb->cs_deadcycle, 0xffffcfff);

diff --git a/configs/MiniFAP_defconfig b/configs/MiniFAP_defconfig
index 7d719f81f52713380965e407d8aeb6580fe164f9..02ca577e28c11e2359fc23c4f37b038b86d31b3b 100644 (file)
--- a/configs/MiniFAP_defconfig
+++ b/configs/MiniFAP_defconfig
@@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/O2D300_defconfig b/configs/O2D300_defconfig
index 38101f05df5dbad52914b7985a61676b277f74b0..c0e9541b875156d417b4f0f281151329b9b0e52a 100644 (file)
--- a/configs/O2D300_defconfig
+++ b/configs/O2D300_defconfig
@@ -4,7 +4,6 @@ CONFIG_TARGET_O2D300=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2DNT2_RAMBOOT_defconfig b/configs/O2DNT2_RAMBOOT_defconfig
index 83006e5582ce950782a9b8a84e377ebf4609952f..8cff44cf36ed46c4b3582aaaf8f9fe2b87dffe82 100644 (file)
--- a/configs/O2DNT2_RAMBOOT_defconfig
+++ b/configs/O2DNT2_RAMBOOT_defconfig
@@ -8,7 +8,6 @@ CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n"
 CONFIG_AUTOBOOT_STOP_STR="++++++++++"
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2DNT2_defconfig b/configs/O2DNT2_defconfig
index 4202d852032965ccd5cb5c1a5fb44c7d7e5e663e..f29abb83bc5572bce45ab190643db6f60cdf5599 100644 (file)
--- a/configs/O2DNT2_defconfig
+++ b/configs/O2DNT2_defconfig
@@ -7,7 +7,6 @@ CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n"
 CONFIG_AUTOBOOT_STOP_STR="++++++++++"
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2D_defconfig b/configs/O2D_defconfig
index b84a1c883963495d3bc19dd380179c79c762b54b..534cfe12e26e934dd3a6264507fc05c63781e1c9 100644 (file)
--- a/configs/O2D_defconfig
+++ b/configs/O2D_defconfig
@@ -4,7 +4,6 @@ CONFIG_TARGET_O2D=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2I_defconfig b/configs/O2I_defconfig
index efcc769ff473d77819cbfd98d2a7742af88024cb..acf42abe29860d063b8e0b0e4ec2bd790316d675 100644 (file)
--- a/configs/O2I_defconfig
+++ b/configs/O2I_defconfig
@@ -4,7 +4,6 @@ CONFIG_TARGET_O2I=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2MNT_O2M110_defconfig b/configs/O2MNT_O2M110_defconfig
index abdc53df21ef46692beb51cf10fae2abd5171082..de647c76b94c3c5ef80aa888feed8a0474bb95e7 100644 (file)
--- a/configs/O2MNT_O2M110_defconfig
+++ b/configs/O2MNT_O2M110_defconfig
@@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M110\""
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2MNT_O2M112_defconfig b/configs/O2MNT_O2M112_defconfig
index 06089fe3cfbdde1464128e4dff2aedf594307881..b243e9cc0ed0e53c58fb1630faba1fd0828028ef 100644 (file)
--- a/configs/O2MNT_O2M112_defconfig
+++ b/configs/O2MNT_O2M112_defconfig
@@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M112\""
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2MNT_O2M113_defconfig b/configs/O2MNT_O2M113_defconfig
index 1ea3f3a09bef900605e9df0a5909ef308e9ce780..1584058289306b4328e5a0b7937b936172ed9337 100644 (file)
--- a/configs/O2MNT_O2M113_defconfig
+++ b/configs/O2MNT_O2M113_defconfig
@@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M113\""
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O2MNT_defconfig b/configs/O2MNT_defconfig
index 0209085605a8fd2949e23bf9dab11afabff73d6a..20bd31466e1104ec6eed87e9bf3fbd8729b4e29e 100644 (file)
--- a/configs/O2MNT_defconfig
+++ b/configs/O2MNT_defconfig
@@ -4,7 +4,6 @@ CONFIG_TARGET_O2MNT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/O3DNT_defconfig b/configs/O3DNT_defconfig
index 5ce41408593a6fafaa8abb1d915273e1b8ac204c..ea769e7edc05def4778bca8ff910eab749e54224 100644 (file)
--- a/configs/O3DNT_defconfig
+++ b/configs/O3DNT_defconfig
@@ -4,7 +4,6 @@ CONFIG_TARGET_O3DNT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/TQM5200S_HIGHBOOT_defconfig b/configs/TQM5200S_HIGHBOOT_defconfig
index d0cd50a63cd946ee79916f2511826ee19e5e5e94..d07596add07d0066b9652bbfb419943c39249187 100644 (file)
--- a/configs/TQM5200S_HIGHBOOT_defconfig
+++ b/configs/TQM5200S_HIGHBOOT_defconfig
@@ -7,7 +7,6 @@ CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -15,7 +14,6 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/TQM5200S_defconfig b/configs/TQM5200S_defconfig
index 5324a9a11c006a2ca3ecb3e51a126c26aaadab56..af3225554bc44d8f807df476a1dd70aa61177450 100644 (file)
--- a/configs/TQM5200S_defconfig
+++ b/configs/TQM5200S_defconfig
@@ -7,7 +7,6 @@ CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -15,7 +14,6 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/TQM5200_B_HIGHBOOT_defconfig b/configs/TQM5200_B_HIGHBOOT_defconfig
index 2f933e6cab3cd8d0dbba16d686ad7eef139a4952..37d6767f287a7e1f9c6e3ae1db27594200923faa 100644 (file)
--- a/configs/TQM5200_B_HIGHBOOT_defconfig
+++ b/configs/TQM5200_B_HIGHBOOT_defconfig
@@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/TQM5200_B_defconfig b/configs/TQM5200_B_defconfig
index f204484f598196dbdec0a0761ac35cf02e13e4b8..5e0cf9ea473d8fb63cfb60df0b2a7c43863a1b9d 100644 (file)
--- a/configs/TQM5200_B_defconfig
+++ b/configs/TQM5200_B_defconfig
@@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/TQM5200_STK100_defconfig b/configs/TQM5200_STK100_defconfig
index db9bb8a30dd8187c141844d0985a1ff6c68ef607..7b4b030d74246fe284c05ff0f0fd6414f717c1c4 100644 (file)
--- a/configs/TQM5200_STK100_defconfig
+++ b/configs/TQM5200_STK100_defconfig
@@ -10,7 +10,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -19,7 +18,6 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/TQM5200_defconfig b/configs/TQM5200_defconfig
index eec60f1be4e72bc691f2ad6c3c84cc832db2a605..4792639653a76382fabab189d7ce56e668287f6b 100644 (file)
--- a/configs/TQM5200_defconfig
+++ b/configs/TQM5200_defconfig
@@ -9,7 +9,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -18,7 +17,6 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/a4m072_defconfig b/configs/a4m072_defconfig
index ce5edcbf01b09c41b3bbe64de054d717b2e89354..0054d4cddbdd8824cc1e2208f874ebfce2c8425a 100644 (file)
--- a/configs/a4m072_defconfig
+++ b/configs/a4m072_defconfig
@@ -7,7 +7,6 @@ CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="asdfg"
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y

diff --git a/configs/ac14xx_defconfig b/configs/ac14xx_defconfig
index e3b7793e0403115073be9f88c83355ae3b3091de..930ec8acf246f024deeb3346fa03457fcd6ae03f 100644 (file)
--- a/configs/ac14xx_defconfig
+++ b/configs/ac14xx_defconfig
@@ -5,7 +5,6 @@ CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_PROMPT="ac14xx> "
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig
index 75cf53fe21a37ca28a835d3562fbca957b667581..41c8be91206b61f2dd25cc9d1c282e33513132a4 100644 (file)
--- a/configs/ap_sh4a_4a_defconfig
+++ b/configs/ap_sh4a_4a_defconfig
@@ -13,7 +13,6 @@ CONFIG_VERSION_VARIABLE=y
 # CONFIG_CMD_ENV_EXISTS is not set
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_ECHO is not set
 # CONFIG_CMD_ITEST is not set

diff --git a/configs/apx4devkit_defconfig b/configs/apx4devkit_defconfig
index e2061a2cce9ff24d108b71ed7f5c614572feedb0..5c30fe3ce745672d3415a2d7c077289450c64a81 100644 (file)
--- a/configs/apx4devkit_defconfig
+++ b/configs/apx4devkit_defconfig
@@ -14,14 +14,12 @@ CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_UBI=y

diff --git a/configs/aria_defconfig b/configs/aria_defconfig
index 963661ab2dba8eb935353683eddab2464aec9039..0f1432f9a8c853ba116bd08ff69a388f523e40a4 100644 (file)
--- a/configs/aria_defconfig
+++ b/configs/aria_defconfig
@@ -5,7 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y

diff --git a/configs/aspenite_defconfig b/configs/aspenite_defconfig
index 26654426ed7738fe542309baa0a7c9c6f338e5b9..0ac39eabd27b164896426f1f51ab4ad401a9c6a6 100644 (file)
--- a/configs/aspenite_defconfig
+++ b/configs/aspenite_defconfig
@@ -6,7 +6,6 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_NET is not set
 # CONFIG_CMD_NFS is not set

diff --git a/configs/cam5200_defconfig b/configs/cam5200_defconfig
index 92985ab3d6183f9cc7c38e04f42ac2ccaaad4836..46a24f56ab1eb49daea77e436a44e6c9137225ea 100644 (file)
--- a/configs/cam5200_defconfig
+++ b/configs/cam5200_defconfig
@@ -7,14 +7,12 @@ CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_MAC_PARTITION=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ISO_PARTITION=y

diff --git a/configs/cam5200_niosflash_defconfig b/configs/cam5200_niosflash_defconfig
index 32bc58ee9bb56e75bee0c09722917cd1d7ff6ecd..6b9877ff217843c39daf9e992886e187bcb43336 100644 (file)
--- a/configs/cam5200_niosflash_defconfig
+++ b/configs/cam5200_niosflash_defconfig
@@ -7,14 +7,12 @@ CONFIG_BOOTDELAY=5
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_MAC_PARTITION=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ISO_PARTITION=y

diff --git a/configs/charon_defconfig b/configs/charon_defconfig
index ec22a6368f27ad641129ed7847cda4488f92906b..8a1429037a00065a6bde4c65e4f2103c29b34535 100644 (file)
--- a/configs/charon_defconfig
+++ b/configs/charon_defconfig
@@ -9,7 +9,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y

diff --git a/configs/cm5200_defconfig b/configs/cm5200_defconfig
index 7d8d01aaaaabdd9789a5e24ec3d09ac5ddfc1185..d3369f44552a0f1fc066f4cbba527f59a446990a 100644 (file)
--- a/configs/cm5200_defconfig
+++ b/configs/cm5200_defconfig
@@ -6,7 +6,6 @@ CONFIG_BOOTDELAY=5
 CONFIG_SILENT_CONSOLE=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y

diff --git a/configs/digsy_mtc_RAMBOOT_defconfig b/configs/digsy_mtc_RAMBOOT_defconfig
index 0d11eec75acba35096bbeb9a3ff44995943452c2..86b2b0d804ec7c78c6cbd8172caf29c2aa1b3410 100644 (file)
--- a/configs/digsy_mtc_RAMBOOT_defconfig
+++ b/configs/digsy_mtc_RAMBOOT_defconfig
@@ -13,7 +13,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="d"
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -21,7 +20,6 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/digsy_mtc_defconfig b/configs/digsy_mtc_defconfig
index dc17ab4406eb39cff9ef17a27d9a21c31760edaa..85b7f850f71d2d21591c47cdaf92857d7af015cf 100644 (file)
--- a/configs/digsy_mtc_defconfig
+++ b/configs/digsy_mtc_defconfig
@@ -11,7 +11,6 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR=" "
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -19,7 +18,6 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/digsy_mtc_rev5_RAMBOOT_defconfig b/configs/digsy_mtc_rev5_RAMBOOT_defconfig
index 4ab11c755b12d7cd5f475d4fb845bc54c4134ec8..7ec8650aca2268841abbd263eb31f524fc5ad362 100644 (file)
--- a/configs/digsy_mtc_rev5_RAMBOOT_defconfig
+++ b/configs/digsy_mtc_rev5_RAMBOOT_defconfig
@@ -13,7 +13,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="d"
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -21,7 +20,6 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/digsy_mtc_rev5_defconfig b/configs/digsy_mtc_rev5_defconfig
index 1f3f3c8bb6012df8145fb2ba551367d720bcd0c0..b4b85330631fdf82812c89daaca5502d69d83da2 100644 (file)
--- a/configs/digsy_mtc_rev5_defconfig
+++ b/configs/digsy_mtc_rev5_defconfig
@@ -13,7 +13,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="d"
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -21,7 +20,6 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/fo300_defconfig b/configs/fo300_defconfig
index b4f334a436150e0faec669330595e225a2f414b8..00418153befd5abae67e9d55624a24bfd1507a59 100644 (file)
--- a/configs/fo300_defconfig
+++ b/configs/fo300_defconfig
@@ -12,7 +12,6 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -21,7 +20,6 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_SNTP=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_BSP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y

diff --git a/configs/gplugd_defconfig b/configs/gplugd_defconfig
index 97bb976803a875305261470af9bda7bf485110f8..f44b68dae8b1a9f22b5639b64453eff3036221d5 100644 (file)
--- a/configs/gplugd_defconfig
+++ b/configs/gplugd_defconfig
@@ -6,7 +6,6 @@ CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SETEXPR is not set

diff --git a/configs/ipek01_defconfig b/configs/ipek01_defconfig
index cac9326b6cb13572a20d68fd700e4aaf10a9551b..690bc0f461189a325e5de8293dbc8b51952ba5fa 100644 (file)
--- a/configs/ipek01_defconfig
+++ b/configs/ipek01_defconfig
@@ -7,13 +7,11 @@ CONFIG_BOOTDELAY=5
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_LOOPW=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y

diff --git a/configs/m28evk_defconfig b/configs/m28evk_defconfig
index 6acbd77d5f3b94e3158ef8953ad253daf326edfb..0ab7f6bb3cabe660af46d5ee926f05549c0a3922 100644 (file)
--- a/configs/m28evk_defconfig
+++ b/configs/m28evk_defconfig
@@ -22,7 +22,6 @@ CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_DHCP=y

diff --git a/configs/mecp5123_defconfig b/configs/mecp5123_defconfig
index ebf541546483b45d1e9c0baf9069e05e9d8e55d3..db52077e1a47331061244441d963f56c996514d8 100644 (file)
--- a/configs/mecp5123_defconfig
+++ b/configs/mecp5123_defconfig
@@ -6,12 +6,10 @@ CONFIG_BOOTDELAY=5
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_FAT=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y

diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig
index 91384a62595f6ed2ca2a4157584246c80cb11126..5040ea574237d372de068ce450fbeedd608dcf78 100644 (file)
--- a/configs/motionpro_defconfig
+++ b/configs/motionpro_defconfig
@@ -8,12 +8,10 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_BEDBUG=y
 CONFIG_LED_STATUS=y

diff --git a/configs/mpc5121ads_defconfig b/configs/mpc5121ads_defconfig
index c0af8127b5cdcd1a99d26104e0fdcc4ff823a387..47c4e5ace708fd1c2e5053f9c2419529fc05cb61 100644 (file)
--- a/configs/mpc5121ads_defconfig
+++ b/configs/mpc5121ads_defconfig
@@ -6,13 +6,11 @@ CONFIG_BOOTDELAY=5
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_MAC_PARTITION=y

diff --git a/configs/mpc5121ads_rev2_defconfig b/configs/mpc5121ads_rev2_defconfig
index ad46e02e94bf12797ae386e85cf84ecacf3798ac..ef700d0773de54eafaf59778daf35c48222a17f9 100644 (file)
--- a/configs/mpc5121ads_rev2_defconfig
+++ b/configs/mpc5121ads_rev2_defconfig
@@ -7,13 +7,11 @@ CONFIG_BOOTDELAY=5
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_MAC_PARTITION=y

diff --git a/configs/pcm030_LOWBOOT_defconfig b/configs/pcm030_LOWBOOT_defconfig
index d19908ca8f22c0f9ed57f39e6acb72b0647a8dc2..2933326e5d0d9141674b88cd6830c9a640855b3b 100644 (file)
--- a/configs/pcm030_LOWBOOT_defconfig
+++ b/configs/pcm030_LOWBOOT_defconfig
@@ -4,11 +4,9 @@ CONFIG_TARGET_PCM030=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000"
 CONFIG_BOOTDELAY=3
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
-CONFIG_CMD_DATE=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_USB=y

diff --git a/configs/pcm030_defconfig b/configs/pcm030_defconfig
index ef5c85888c90e780cae0dface6f56feeb5665db5..ff9f4e9f4f00a54a02a92d044ee844fff85de9f8 100644 (file)
--- a/configs/pcm030_defconfig
+++ b/configs/pcm030_defconfig
@@ -4,11 +4,9 @@ CONFIG_TARGET_PCM030=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PROMPT="uboot> "
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
-CONFIG_CMD_DATE=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_USB=y

diff --git a/configs/pdm360ng_defconfig b/configs/pdm360ng_defconfig
index f45a90caf931d9c05fe3f2aadccc3a8d68d7f472..4ef0df1aa81e3dde340b6d64d0317cd88d47e85f 100644 (file)
--- a/configs/pdm360ng_defconfig
+++ b/configs/pdm360ng_defconfig
@@ -10,13 +10,11 @@ CONFIG_SILENT_CONSOLE=y
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
 # CONFIG_PCI is not set

diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig
index c5c3d5271862b05615f271c68af381baa505aa64..91b08dc24f2986173610cc53f4f1790c17635223 100644 (file)
--- a/configs/r0p7734_defconfig
+++ b/configs/r0p7734_defconfig
@@ -13,7 +13,6 @@ CONFIG_VERSION_VARIABLE=y
 # CONFIG_CMD_ENV_EXISTS is not set
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_ECHO is not set
 # CONFIG_CMD_ITEST is not set

diff --git a/configs/v38b_defconfig b/configs/v38b_defconfig
index db4c47c3d25c5c1adb020d516d42c684c881ab28..18dc039d9355b9846ec504c82e70a43a4c892eb8 100644 (file)
--- a/configs/v38b_defconfig
+++ b/configs/v38b_defconfig
@@ -3,13 +3,11 @@ CONFIG_MPC5xxx=y
 CONFIG_TARGET_V38B=y
 CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_DIAG=y
 CONFIG_MAC_PARTITION=y

diff --git a/include/common.h b/include/common.h
index 83e4037a86d6d2796d6a831061c8ee86470f7f1f..45f190a600f58b39b140f3638ce6530e2636e4eb 100644 (file)
--- a/include/common.h
+++ b/include/common.h
@@ -499,9 +499,19 @@ void       reset_phy     (void);
 void   fdc_hw_init   (void);
 
 /* $(BOARD)/eeprom.c */
+#ifdef CONFIG_CMD_EEPROM
 void eeprom_init  (int bus);
 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+#else
+/*
+ * Some EEPROM code is depecated because it used the legacy I2C interface. Add
+ * some macros here so we don't have to touch every one of those uses
+ */
+#define eeprom_init(bus)
+#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
+#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
+#endif
 
 /*
  * Set this up regardless of board

diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index 1817571efe48e7c4393b1b2f59a9b1160dfffc39..7b162cccefebbf83b18a448768601b5d99a52cd3 100644 (file)
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -166,7 +166,6 @@
 
 /* I2c */
 #undef CONFIG_SYS_FSL_I2C
-#undef CONFIG_HARD_I2C         /* I2C with hardware support */
 #undef CONFIG_SYS_I2C_SOFT     /* I2C bit-banged */
 /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SPEED           80000

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 13f4ef67e19235a77d3775b7908e701c4083a286..19e0b1be1bdbb36badc288c1e61870f2bf811e48 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -124,8 +124,7 @@
 #ifndef CONFIG_CAM5200
 /* POST support */
 #define CONFIG_POST            (CONFIG_SYS_POST_MEMORY   | \
-                                CONFIG_SYS_POST_CPU       | \
-                                CONFIG_SYS_POST_I2C)
+                                CONFIG_SYS_POST_CPU)
 #endif
 
 #ifdef CONFIG_POST
@@ -144,7 +143,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_REGINFO
 
@@ -278,54 +276,6 @@
 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2   /* define for 66MHz speed */
 #endif
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#ifdef CONFIG_TQM5200_REV100
-#define CONFIG_SYS_I2C_MODULE          1       /* Select I2C module #1 for rev. 100 board */
-#else
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #2 for all other revs */
-#endif
-
-/*
- * I2C clock frequency
- *
- * Please notice, that the resulting clock frequency could differ from the
- * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-Boot
- * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
- * approximation allways lies below the configured value, never above.
- */
-#define CONFIG_SYS_I2C_SPEED           100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
- * also). For other EEPROMs configuration should be verified. On Mini-FAP the
- * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
- * same configuration could be used.
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5       /* =32 Bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  20
-
-/*
- * HW-Monitor configuration on Mini-FAP
- */
-#if defined (CONFIG_MINIFAP)
-#define CONFIG_SYS_I2C_HWMON_ADDR              0x2C
-#endif
-
-/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_MINIFAP)
-#undef CONFIG_SYS_POST_I2C_ADDRS
-#define CONFIG_SYS_POST_I2C_ADDRS      {CONFIG_SYS_I2C_EEPROM_ADDR,    \
-                                        CONFIG_SYS_I2C_HWMON_ADDR,     \
-                                        CONFIG_SYS_I2C_SLAVE}
-#endif
-
 /*
  * Flash configuration
  */
@@ -544,18 +494,6 @@
 #endif
 #endif
 
-/*
- * RTC configuration
- */
-#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
-# define CONFIG_RTC_M41T11 1
-# define CONFIG_SYS_I2C_RTC_ADDR 0x68
-# define CONFIG_SYS_M41T11_BASE_YEAR   1900    /* because Linux uses the same base
-                                          year */
-#else
-# define CONFIG_RTC_MPC5200    1       /* use internal MPC5200 RTC */
-#endif
-
 /*
  * Miscellaneous configurable options
  */

diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index 79099518e7bba25a2bb53ef81090c2a5ad306c13..2ea43ffce1f9979e50e7debbd042740284bd1421 100644 (file)
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -81,7 +81,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
 
 #if defined(CONFIG_PCI)
@@ -145,25 +144,6 @@
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                        1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED           100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x52    /* 1010010x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-#define CONFIG_SYS_EEPROM_WREN                 1
-#define CONFIG_SYS_EEPROM_WP                   GPIO_PSC2_4
-
 /*
  * Flash configuration
  */

diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index ee015bb83d45e2f40e55eb0ac1b9a50715f84450..2a46e9b86471c157bd35274d7f2c36d2b6366c2b 100644 (file)
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -336,28 +336,11 @@
 
 #define CONFIG_CMDLINE_EDITING         1       /* command line history */
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-
-/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
-/*
- * EEPROM configuration for Atmel AT24C01:
- * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x52
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  30
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5
-
 /*
  * Ethernet configuration
  */
@@ -384,7 +367,6 @@
 #define CONFIG_LOADS_ECHO              1
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1
 
-#define CONFIG_CMD_EEPROM
 #undef CONFIG_CMD_FUSE
 #undef CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2

diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index 5f5882dc8e7f20383066c9db7939d1ea6744f826..d3d72b634d622dff541b1f5654f9015c0f1e6dcb 100644 (file)
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -35,20 +35,6 @@
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
-/* I2C */
-#define CONFIG_SH_SH7734_I2C   1
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_I2C_MULTI_BUS   1
-#define CONFIG_SYS_MAX_I2C_BUS 2
-#define CONFIG_SYS_I2C_MODULE  0
-#define CONFIG_SYS_I2C_SPEED   400000 /* 400 kHz */
-#define CONFIG_SYS_I2C_SLAVE   0x50
-#define CONFIG_SH_I2C_DATA_HIGH        4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK            500000000
-#define CONFIG_SH_I2C_BASE0            0xFFC70000
-#define CONFIG_SH_I2C_BASE1            0xFFC71000
-
 /* undef to save memory        */
 #define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */

diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index a4c7847dab21337ce62012f64c050b12760ab413..cce39f27c7dbfa81107ecab632a1f84a8d3bf1b9 100644 (file)
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -79,12 +79,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #endif
 
-/* RTC */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-#endif
-
 /* Boot Linux */
 #define CONFIG_BOOTFILE                        "uImage"
 #define CONFIG_BOOTCOMMAND             "run bootcmd_nand"

diff --git a/include/configs/aria.h b/include/configs/aria.h
index 94f6605d468e030fb55e5eacaa4fec0bc0306fc2..4d946fc44a9cfe0e88666e6147735467c036ad38 100644 (file)
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -340,31 +340,11 @@
 
 #endif
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-
-/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#if 0
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}      /* Don't probe these addrs */
-#endif
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
-/*
- * EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
- * 16-bit addresses, 10ms write delay, 32-Byte Page Write Mode
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5
-
 /*
  * Ethernet configuration
  */
@@ -392,7 +372,6 @@
 #define CONFIG_LOADS_ECHO              1
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1
 
-#define CONFIG_CMD_EEPROM
 #undef CONFIG_CMD_FUSE
 #undef CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2

diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h
index 768e8fbfa4230854284c599a6f5c346edc2ea01b..66e8cd5e9a4b2b424c50359a5d2293259a446265 100644 (file)
--- a/include/configs/axs10x.h
+++ b/include/configs/axs10x.h
@@ -100,7 +100,7 @@
 /*
  * Environment settings
  */
-#define CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                        SZ_512
 #define CONFIG_ENV_OFFSET              0
 

diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 0073cb53736990f7bba3fa2a32d8d1f71c030d51..3a7d826837ec496b7cd89d09a3773bdc5559f00d 100644 (file)
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -44,7 +44,7 @@
 /*
  * POST support
  */
-#define CONFIG_POST            (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
+#define CONFIG_POST            (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU)
 #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
 /* List of I2C addresses to be verified by POST */
 #define CONFIG_SYS_POST_I2C_ADDRS      {CONFIG_SYS_I2C_SLAVE,  \
@@ -199,16 +199,6 @@
                                        "2m(kernel),27904k(rootfs),"    \
                                        "-(config)"
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #2 */
-#define CONFIG_SYS_I2C_SPEED           40000   /* 40 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_IO              0x38    /* PCA9554AD I2C I/O port address */
-#define CONFIG_SYS_I2C_EEPROM          0x53    /* I2C EEPROM device address */
-
 /*
  * RTC configuration
  */

diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index 2b56945dd939679b5920aa1bd9cf0fa8849da766..ab546c50cdbe996ebfae188b1ec7ca717554665b 100644 (file)
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -85,7 +85,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_PCI
@@ -205,36 +204,6 @@
 
 #define CONFIG_BOOTCOMMAND     "run mtcb_start"
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_MODULE  1
-#define CONFIG_SYS_I2C_SPEED   100000
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  70
-
-/*
- * RTC configuration
- */
-#if defined(CONFIG_DIGSY_REV5)
-#define CONFIG_SYS_I2C_RTC_ADDR        0x56
-#define CONFIG_RTC_RV3029
-/* Enable 5k Ohm trickle charge resistor */
-#define CONFIG_SYS_RV3029_TCR  0x20
-#else
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR        0x68
-#define CONFIG_SYS_DS1339_TCR_VAL      0xAB    /* diode + 4k resistor */
-#endif
-
 /*
  * Flash configuration
  */

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 6b6bbbd5c027a4e1e6d9f1cacb75ac6c06fa3c73..7ffc9d1dd988a1d3ff06e2803b58c0a4c8103757 100644 (file)
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -165,7 +165,6 @@
 #define CONFIG_TSEC2
 #define CONFIG_TSEC_ENET
 #define CONFIG_HARD_SPI
-#define CONFIG_HARD_I2C
 
 /*
  * NOR FLASH setup

diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index aff4adf5d0dc49c4766a0c96e16bc6d04685a0a3..ece72c6aa1d267b7789ed9a3978575030df9a82e 100644 (file)
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -150,29 +150,6 @@
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE  2       /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED   100000  /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
 #define CONFIG_SYS_FLASH_BASE          0xFC000000
 #define CONFIG_SYS_FLASH_SIZE          0x01000000
 #define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + \

diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 0d97317c7fb9c6beb7250c05e2fd3e26062555dc..4461623118e72201dcaa89791c352ea50400ab19 100644 (file)
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -127,25 +127,6 @@
 #define OF_STDOUT_PATH         "/soc5200@f0000000/serial@2000"
 #endif
 
-#if 0
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED           100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  70
-#endif
-
 /*
  * Flash configuration
  */

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index f6fa599e6bfd39d69f8e3d9747ab2a596658f849..c4717238bb5c90aa5993d6b01a8d2d76ec332744 100644 (file)
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -16,7 +16,6 @@
 /* U-Boot Commands */
 #define CONFIG_FAT_WRITE
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
 
@@ -63,11 +62,6 @@
 #define CONFIG_FEC_MXC
 #endif
 
-/* EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#endif
-
 /* RTC */
 #ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */

diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
new file mode 100644 (file)
index 0000000..68874dc
--- /dev/null
+++ b/include/configs/manroland/mpc5200-common.h
@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __MANROLAND_MPC52XX__COMMON_H
+#define __MANROLAND_MPC52XX__COMMON_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC5200         1       /* MPC5200 CPU */
+
+/* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN       33000000
+
+#define CONFIG_HIGH_BATS       1       /* High BATs supported          */
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE     1       /* console is on PSC1   */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200,\
+                                        230400 }
+
+#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */
+#   define CONFIG_SYS_LOWBOOT          1
+#endif
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
+
+/*
+ * Flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE          0xFF800000
+
+#define CONFIG_SYS_FLASH_SIZE          0x00800000 /* 8 MByte */
+
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max num of flash banks
+                                          (= chip selects) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout [ms]*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout [ms]*/
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE                0x4000
+#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_MBAR                0xF0000000
+#define CONFIG_SYS_DEFAULT_MBAR        0x80000000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE -\
+                                        GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_SDRAM_BASE          0x00000000
+#define CONFIG_SYS_SRAM_BASE   0x80100000      /* CS 1 */
+#define CONFIG_SYS_DISPLAY_BASE        0x80600000      /* CS 3 */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_DDR       1
+#define SDRAM_MODE      0x018D0000
+#define SDRAM_EMODE     0x40090000
+#define SDRAM_CONTROL   0x714f0f00
+#define SDRAM_CONFIG1   0x73722930
+#define SDRAM_CONFIG2   0x47770000
+#define SDRAM_TAPDELAY  0x10000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_POST_SIZE
+#else
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE
+#endif
+
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT          1
+#endif
+
+#define CONFIG_SYS_MONITOR_LEN         (192 << 10)
+#define CONFIG_SYS_MALLOC_LEN          (512 << 10)
+#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC     1
+#define CONFIG_MPC5xxx_FEC_MII100
+#define CONFIG_PHY_ADDR                0x00
+#define CONFIG_MII             1
+
+/*use  Hardware WDT */
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs     */
+#if defined(CONFIG_CMD_KGDB)
+#  define CONFIG_SYS_CACHELINE_SHIFT   5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL          HID0_ICE
+
+#define CONFIG_SYS_BOOTCS_START        CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS0_START           CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE            CONFIG_SYS_FLASH_SIZE
+
+/* 8Mbit SRAM @0x80100000 */
+#define CONFIG_SYS_CS1_START           CONFIG_SYS_SRAM_BASE
+
+#define CONFIG_SYS_CS_BURST            0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE        0x33333333
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD          /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
+#undef CONFIG_IDE_LED                  /* LED   for ide not supported  */
+
+#define CONFIG_SYS_IDE_MAXBUS          1       /* max. 1 IDE bus       */
+
+#define CONFIG_IDE_PREINIT     1
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
+
+#define CONFIG_SYS_ATA_BASE_ADDR       MPC5XXX_ATA
+
+/* Offset for data I/O                 */
+#define CONFIG_SYS_ATA_DATA_OFFSET     (0x0060)
+
+/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_REG_OFFSET      (CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers      */
+#define CONFIG_SYS_ATA_ALT_OFFSET      (0x005C)
+
+/* Interval between registers  */
+#define CONFIG_SYS_ATA_STRIDE          4
+
+#define CONFIG_ATAPI            1
+
+#define OF_CPU                 "PowerPC,5200@0"
+#define OF_SOC                 "soc5200@f0000000"
+#define OF_TBCLK               (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH         "/soc5200@f0000000/serial@2000"
+#define CONFIG_OF_IDE_FIXUP
+
+#endif /* __MANROLAND_MPC52XX__COMMON_H */

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 1a9cb675dfba370f5a2bff45d9a30f427b746670..fe94e663c5b3a9ef5572cb445c51177e29c1d3fd 100644 (file)
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -241,26 +241,11 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE           0x7F    /* slave address */
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2       /* 16-bit EEPROM address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Atmel: AT24C32A-10TQ-2.7 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10       /* 10ms of delay */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5    /* 32-Byte Page Write Mode */
-#define CONFIG_SYS_EEPROM_WREN                 /* Use EEPROM write protect */
-
 /*
  * Ethernet configuration
  */
@@ -280,7 +265,7 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_EEPROM                /* Store env in I2C EEPROM      */
+#define CONFIG_ENV_IS_NOWHERE          /* Store env in I2C EEPROM      */
 #define CONFIG_ENV_SIZE                0x1000
 #define CONFIG_ENV_OFFSET       0x0000 /* environment starts here      */
 
@@ -288,7 +273,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
 
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_EEPROM
 #undef CONFIG_CMD_FUSE
 #undef CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2

diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 136db0dd260b5408fa8c077a0a26c136b329b269..cb5c346807bf297ea918ad5d858906511ac1cdb8 100644 (file)
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -34,7 +34,6 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_JFFS2
@@ -255,21 +254,6 @@
 #define CONFIG_SYS_ATA_REG_OFFSET      CONFIG_SYS_ATA_DATA_OFFSET
 #define CONFIG_SYS_ATA_STRIDE          4
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* select I2C module #2 */
-#define CONFIG_SYS_I2C_SPEED           100000  /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      1       /* 2 bytes per write cycle */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5       /* 2ms/cycle + 3ms extra */
-
 /*
  * RTC configuration
  */
@@ -283,12 +267,6 @@
 #define ENABLE_GPIO_OUT                0x00000024
 #define LED_ON                 0x00000010
 
-/*
- * Temperature sensor
- */
-#define CONFIG_DTT_LM75                1
-#define CONFIG_DTT_SENSORS     { 0x49 }
-
 /*
  * Environment settings
  */

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index dafb724e3fc99abef19f25d471b4f704cc120752..f3961a6f3558d1944ff166e929b8b149cfdefa29 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -327,28 +327,11 @@
 
 #endif
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#if 0
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}      /* Don't probe these addrs */
-#endif
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2       /* 16-bit EEPROM address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* Atmel: AT24C32A-10TQ-2.7 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* 10ms of delay */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5       /* 32-Byte Page Write Mode */
-
 /*
  * Ethernet configuration
  */
@@ -396,7 +379,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_REGINFO

diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index fdf596f82f0be7abbe7887421ef37811ad11f303..c403dda48317b6b89e1baa6ae00a76689a81ff2d 100644 (file)
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -126,16 +126,6 @@
 #endif
 #endif
 
-/* I2C */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXS
-#define CONFIG_HARD_I2C
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED           400000
-#endif
-#endif
-
 /* LCD */
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_MXS

diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index e2881a7177b94fe7fe708f5d2397d63f283b8b7c..1b4200bcbffc8fcd881454442aee18fee4b7e1f0 100644 (file)
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -68,7 +68,6 @@
 /*
  * Supported commands
  */
-#define CONFIG_CMD_EEPROM
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
 #endif
@@ -172,27 +171,6 @@
 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2   /* define for 66MHz speed */
 #endif
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                        1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          1       /* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED           100000  /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration:
- *
- * O2DNT board is equiped with Ramtron FRAM device FM24CL16
- * 16 Kib Ferroelectric Nonvolatile serial RAM memory
- * organized as 2048 x 8 bits and addressable as eight I2C devices
- * 0x50 ... 0x57 each 256 bytes in size
- *
- */
-#define CONFIG_SYS_I2C_FRAM
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 /*
  * There is no write delay with FRAM, write operations are performed at bus
  * speed. Thus, no status polling or write delay is needed.

diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index 6d8a2338a292fa517fea83e69ddf5c17696f23ea..406f3e547ab9f381d5bcbbe09b590e7c96a4a8ab 100644 (file)
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -49,7 +49,6 @@ Serial console configuration
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_PCI
 
@@ -120,31 +119,6 @@ IPB Bus clocking configuration.
 #define CONFIG_PCI_IO_SIZE             0x01000000
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-/*---------------------------------------------------------------------------
- I2C configuration
----------------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*---------------------------------------------------------------------------
- EEPROM CAT24WC32 configuration
----------------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x52    /* 1010100x */
-#define CONFIG_SYS_I2C_FACT_ADDR       0x52    /* EEPROM CAT24WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2       /* Bytes of address */
-#define CONFIG_SYS_EEPROM_SIZE         2048
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
-
-/*---------------------------------------------------------------------------
-RTC configuration
----------------------------------------------------------------------------*/
-#define RTC
-#define CONFIG_RTC_PCF8563             1
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
 /*---------------------------------------------------------------------------
  Flash configuration
 ---------------------------------------------------------------------------*/
@@ -172,11 +146,10 @@ RTC configuration
  Environment settings
 ---------------------------------------------------------------------------*/
 
-/* pcm030 ships with environment is EEPROM by default */
-#define CONFIG_ENV_IS_IN_EEPROM        1
+#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_OFFSET      0x00    /* environment starts at the */
                                        /*beginning of the EEPROM */
-#define CONFIG_ENV_SIZE                CONFIG_SYS_EEPROM_SIZE
+#define CONFIG_ENV_SIZE                2048
 
 #define CONFIG_ENV_OVERWRITE   1
 

diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 501611dde72fb37f405a0075f30c625b7992eb52..4bd8236b33cd57ed738638d5f30e986966456f83 100644 (file)
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -301,34 +301,11 @@
 #define CONFIG_SYS_PDM360NG_COPROC_READ_DELAY  5000
 #define CONFIG_SYS_PDM360NG_COPROC_BAUDRATE    38400
 
-/*
- * I2C
- */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2       /* 16-bit EEPROM addr */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* ST AT24C01 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* 10ms of delay */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4       /* 16-Byte Write Mode */
-
-/*
- * MAC addr in EEPROM
- */
-#define CONFIG_SYS_I2C_EEPROM_BUS_NUM          0
-#define CONFIG_SYS_I2C_EEPROM_MAC_OFFSET       0x10
 /*
  * Enabled only to delete "ethaddr" before testing
  * "ethaddr" setting from EEPROM
@@ -344,12 +321,6 @@
 #define CONFIG_FEC_AN_TIMEOUT  1
 #define CONFIG_HAS_ETH0
 
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_M41T62                      /* use M41T00 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR                0x68    /* at address 0x68      */
-
 /*
  * Environment
  */
@@ -367,7 +338,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_REGINFO
 
 #undef CONFIG_CMD_FUSE

diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index 642572fc9549d3aa0a5af0eaf967cd16075754fe..b159b1ed8d9fd3ddd2729cc5f2d82eb6a09f253b 100644 (file)
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -40,20 +40,6 @@
 # define CONFIG_SMC911X_BASE (0x84000000)
 #endif
 
-/* I2C */
-#define CONFIG_SH_SH7734_I2C   1
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_I2C_MULTI_BUS   1
-#define CONFIG_SYS_MAX_I2C_BUS 2
-#define CONFIG_SYS_I2C_MODULE  0
-#define CONFIG_SYS_I2C_SPEED   100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE   0x50
-#define CONFIG_SH_I2C_DATA_HIGH        4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK            500000000
-#define CONFIG_SH_I2C_BASE0            0xFFC70000
-#define CONFIG_SH_I2C_BASE1            0xFFC7100
-
 /* undef to save memory        */
 #define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 398b3aa34393bdfa71b09edd5e696c3fc549ca36..33487cd86fee38403488bee51e9aed3053ef8777 100644 (file)
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -97,16 +97,6 @@
 #define CONFIG_PHY_MICREL
 #endif
 
-#if 0                          /* Disable until the I2C driver will be updated */
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE            I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED           100000
-#endif
-
 #if 0                          /* Disable until the FLASH will be implemented */
 #define CONFIG_SYS_USE_NAND
 #endif

diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index cc0007827d4de7903f9b93b2435bad92e0d905a5..0bc0ae517a2dc697269c8f7c1fc150ec273be564 100644 (file)
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -134,27 +134,6 @@
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK                 /* define for 133MHz speed */
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED           100000  /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  70
-
-/*
- * RTC configuration
- */
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
 /*
  * Flash configuration - use CFI driver
  */