usb: spear: Add support for both SPEAr600 EHCI controllers

USB EHCI on SPEAr600 has not been tested for a while. The base controller
addresses are missing. This patch adds the defines to the header. And adds
the missing code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vipin Kumar <vk.vipin@gmail.com>
Cc: Marek Vasut <marex@denx.de>

diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c
index 1ce9db7a7da54176e38bc6bb17c4951022eb770c..3037084b29bce7cdae69b31a65f25eb79bb7dba0 100644 (file)
--- a/arch/arm/cpu/arm926ejs/spear/cpu.c
+++ b/arch/arm/cpu/arm926ejs/spear/cpu.c
@@ -47,8 +47,12 @@ int arch_cpu_init(void)
 #if defined(CONFIG_NAND_FSMC)
        periph1_clken |= MISC_FSMCENB;
 #endif
+#if defined(CONFIG_USB_EHCI_SPEAR)
+       periph1_clken |= PERIPH_USBH1 | PERIPH_USBH2;
+#endif
 
        writel(periph1_clken, &misc_p->periph1_clken);
+
        return 0;
 }
 

diff --git a/arch/arm/include/asm/arch-spear/hardware.h b/arch/arm/include/asm/arch-spear/hardware.h
index c6da405cc07a6fafe346999321187837ee2eaf34..065360ab35a7254a2931ceedeb8caa4e0c11c78f 100644 (file)
--- a/arch/arm/include/asm/arch-spear/hardware.h
+++ b/arch/arm/include/asm/arch-spear/hardware.h
@@ -11,6 +11,8 @@
 #define CONFIG_SYS_USBD_BASE                   0xE1100000
 #define CONFIG_SYS_PLUG_BASE                   0xE1200000
 #define CONFIG_SYS_FIFO_BASE                   0xE1000800
+#define CONFIG_SYS_UHC0_EHCI_BASE              0xE1800000
+#define CONFIG_SYS_UHC1_EHCI_BASE              0xE2000000
 #define CONFIG_SYS_SMI_BASE                    0xFC000000
 #define CONFIG_SPEAR_SYSCNTLBASE               0xFCA00000
 #define CONFIG_SPEAR_TIMERBASE                 0xFC800000

diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 210ee9e88e2c758d75458ea95c0dcdf1b03aed88..9e90e18cfe0cc14aa61a4f27f3c9d24ed5fbe2eb 100644 (file)
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -14,7 +14,21 @@
 #include <usb.h>
 #include "ehci.h"
 #include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
 
+static void spear6xx_usbh_stop(void)
+{
+       struct misc_regs *const misc_p =
+           (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+       u32 periph1_rst = readl(misc_p->periph1_rst);
+
+       periph1_rst |= PERIPH_USBH1 | PERIPH_USBH2;
+       writel(periph1_rst, misc_p->periph1_rst);
+
+       udelay(1000);
+       periph1_rst &= ~(PERIPH_USBH1 | PERIPH_USBH2);
+       writel(periph1_rst, misc_p->periph1_rst);
+}
 
 /*
  * Create the appropriate control structures to manage
@@ -23,9 +37,23 @@
 int ehci_hcd_init(int index, enum usb_init_type init,
                struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-       *hccr = (struct ehci_hccr *)(CONFIG_SYS_UHC0_EHCI_BASE + 0x100);
-       *hcor = (struct ehci_hcor *)((uint32_t)*hccr
-                       + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+       u32 ehci = 0;
+
+       switch (index) {
+       case 0:
+               ehci = CONFIG_SYS_UHC0_EHCI_BASE;
+               break;
+       case 1:
+               ehci = CONFIG_SYS_UHC1_EHCI_BASE;
+               break;
+       default:
+               printf("ERROR: wrong controller index!\n");
+               break;
+       };
+
+       *hccr = (struct ehci_hccr *)(ehci + 0x100);
+       *hcor = (struct ehci_hcor *)((uint32_t) *hccr +
+                       HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
 
        debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n",
                (uint32_t)*hccr, (uint32_t)*hcor,
@@ -40,5 +68,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
  */
 int ehci_hcd_stop(int index)
 {
+#if defined(CONFIG_SPEAR600)
+       spear6xx_usbh_stop();
+#endif
+
        return 0;
 }