Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
return CMD_RET_FAILURE;
}
-
ret = ab_select_slot(dev_desc, &part_info, dec_tries);
if (ret < 0) {
printf("Android boot failed, error %d.\n", ret);
#endif
-
/*******************************************************************/
/* iminfo - print header info for a requested image */
/*******************************************************************/
);
#endif
-
/*******************************************************************/
/* imls - list all images found in flash */
/*******************************************************************/
return CMD_RET_USAGE;
}
-
U_BOOT_CMD(bootstage, 4, 1, do_boostage,
"Boot stage command",
" - check boot progress and timing\n"
return -1;
}
-
U_BOOT_CMD(
icache, 2, 1, do_icache,
"enable or disable instruction cache",
return 0;
}
-
/***************************************************/
U_BOOT_CMD(
* Add support for a CRAMFS located in RAM
*/
-
/*
* CRAMFS support
*/
# define DEBUGF(fmt, args...)
#endif
-
#ifndef CONFIG_MTD_NOR_FLASH
# define OFFSET_ADJUSTMENT 0
#else
return extension_num;
}
-
static int do_extension_scan(struct cmd_tbl *cmdtp, int flag,
int argc, char *const argv[])
{
return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT);
}
-
U_BOOT_CMD(
fatload, 7, 0, do_fat_fsload,
"load binary file from a dos filesystem",
return 0;
}
-
U_BOOT_LONGHELP(font,
"list - list available fonts\n"
"font select <name> [<size>] - select font to use\n"
#endif
-
#if defined(CONFIG_CMD_LOADB)
/*
* loadb command (load binary) included
static int k_recv(void);
static ulong load_serial_bin(ulong offset);
-
static char his_eol; /* character he needs at end of packet */
static int his_pad_count; /* number of pad chars he needs */
static char his_pad_char; /* pad chars he needs */
return rcode;
}
-
static ulong load_serial_bin(ulong offset)
{
int size, i;
s1_sendpacket(a_b);
}
-
static void (*os_data_init)(void);
static void (*os_data_char)(char new_char);
static int os_data_state, os_data_state_saved;
os_data_char = bin_data_char;
}
-
/* k_data_* simply handles the kermit escape translations */
static int k_data_escape, k_data_escape_saved;
static void k_data_init(void)
xyzModem_stream_terminate(false, &getcxmodem);
xyzModem_stream_close(&err);
-
flush_cache(offset, ALIGN(size, ARCH_DMA_MINALIGN));
printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
* SAVES always requires LOADS support, but not vice versa
*/
-
#if defined(CONFIG_CMD_SAVES)
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
#endif /* CONFIG_CMD_SAVES */
#endif /* CONFIG_CMD_LOADS */
-
#if defined(CONFIG_CMD_LOADB)
U_BOOT_CMD(
loadb, 3, 0, do_load_serial_bin,
"[.b, .w, .l" HELP_Q "] address [# of objects]"
);
-
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
"memory modify (auto-incrementing address)",
"[.b, .w, .l" HELP_Q "] address"
);
-
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
"memory modify (constant address)",
return 1;
}
-
if (argc == 3) {
if (strncmp(argv[2], "reset", 5) == 0)
cpu_reset(cpuid);
index_partitions();
}
-
/**
* Produce a mtd_info given a type and num.
*
return 0;
}
-
/**
* Performs sanity check for supplied partition. Offset and size are
* verified to be within valid range. Partition type is checked and
p += len;
maxlen -= len;
-
/* add offset only when there is a gap between
* partitions */
if ((!prev_part && (offset != 0)) ||
return 0;
}
-
/**
* Parse and initialize global mtdids mapping and create global
* device/partition list.
);
#endif
-
#ifdef CONFIG_CMD_RARP
int do_rarpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
bootm_argv[2] = argv[0]; /* kernel addr */
}
-
/*
* - do the work -
* exec subcommands of do_bootm to init the images
return 0;
}
-
/***************************************************/
U_BOOT_CMD(
} \
} while (0)
-
static int test_timing(struct udevice *dev)
{
uint8_t in[20], out[20];
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*/
-
/*
* UBIFS command support
*/
#define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
#define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
-
typedef struct _UNI_DEV UNI_DEV;
struct _UNI_DEV {
static UNI_DEV *dev;
-
int universe_init(void)
{
int j, result;
return result;
}
-
/*
* Create pci slave window (access: pci -> vme)
*/
return -result;
}
-
/*
* Create vme slave window (access: vme -> pci)
*/
return -result;
}
-
/*
* Tundra Universe configuration
*/
return 0;
}
-
U_BOOT_CMD(
universe, 8, 1, do_universe,
"initialize and configure Turndra Universe",
}
}
-
/******************************************************************************
* usb boot command intepreter. Derived from diskboot
*/
#endif /* CONFIG_USB_STORAGE */
);
-
#ifdef CONFIG_USB_STORAGE
U_BOOT_CMD(
usbboot, 3, 1, do_usbboot,
* Kai-Uwe Bloem, Auerswald GmbH & Co KG, <linux-development@auerswald.de>
*/
-
/*
* Multi Image extract
*/
* ...
*/
-
#include <config.h>
#include <command.h>
return 0;
}
-
int zfs_print(const char *entry, const struct zfs_dirhook_info *data)
{
printf("%s %s\n",
return 0; /* 0 continue, 1 stop */
}
-
static int do_zfs_ls(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
return 0;
}
-
U_BOOT_CMD(zfsls, 4, 1, do_zfs_ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"