- CONFIG_SYS_FLASH_BASE:
Physical start address of Flash memory.
-- CONFIG_SYS_MONITOR_BASE:
- Physical start address of boot monitor code (set by
- make config files to be same as the text base address
- (CONFIG_SYS_TEXT_BASE) used when linking) - same as
- CONFIG_SYS_FLASH_BASE when booting from flash.
-
- CONFIG_SYS_MONITOR_LEN:
Size of memory reserved for monitor code, used to
determine _at_compile_time_ (!) if the environment is
/* Interrupt vectors do not fit in minimal SPL. */
#if !defined(MINIMAL_SPL)
/* Setup interrupt vectors */
- lis r1,CONFIG_SYS_MONITOR_BASE@h
+ lis r1,CONFIG_VAL(SYS_MONITOR_BASE)@h
mtspr IVPR,r1
li r4,CriticalInput@l
*/
create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
0, BOOKE_PAGESZ_4M, \
- CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xffc00000, MAS2_I|MAS2_G, \
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
*/
create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
0, BOOKE_PAGESZ_256K, \
- CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \
- CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfffc0000, MAS2_I, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#endif
#endif
/* create a temp mapping in AS=1 to the 4M boot window */
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_4M, \
- CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xffc00000, MAS2_I|MAS2_G, \
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
- CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
*/
#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_NXP_ESBC) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
- /* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE
+ /* create a temp mapping in AS = 1 for mapping CONFIG_VAL(SYS_MONITOR_BASE)
* to L3 Address configured by PBL for ISBC code
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
- CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#else
/*
- * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
- * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
+ * create a temp mapping in AS=1 to the 1M CONFIG_VAL(SYS_MONITOR_BASE) space, the main
+ * image has been relocated to CONFIG_VAL(SYS_MONITOR_BASE) on the second stage.
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
- CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
- CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \
+ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#endif
#else
/* Calculate absolute address in FLASH and jump there */
/*--------------------------------------------------------------*/
- lis r3,CONFIG_SYS_MONITOR_BASE@h
- ori r3,r3,CONFIG_SYS_MONITOR_BASE@l
+ lis r3,CONFIG_VAL(SYS_MONITOR_BASE)@h
+ ori r3,r3,CONFIG_VAL(SYS_MONITOR_BASE)@l
addi r3,r3,_start_cont - _start
mtlr r3
blr
GET_GOT
#ifndef CONFIG_SPL_SKIP_RELOCATE
mr r3,r5 /* Destination Address */
- lis r4,CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4,r4,CONFIG_SYS_MONITOR_BASE@l
+ lis r4,CONFIG_VAL(SYS_MONITOR_BASE)@h /* Source Address */
+ ori r4,r4,CONFIG_VAL(SYS_MONITOR_BASE)@l
lwz r5,GOT(__init_end)
sub r5,r5,r4
li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
/*
* Fix GOT pointer:
*
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ * New GOT-PTR = (old GOT-PTR - CONFIG_VAL(SYS_MONITOR_BASE)) + Destination Address
*
* Offset:
*/
help
The address in memory that U-Boot will be running from, initially.
+config HAVE_SYS_MONITOR_BASE
+ bool
+ depends on ARC || MIPS || M68K || NIOS2 || PPC || XTENSA || X86 \
+ || FLASH_PIC32 || ENV_IS_IN_FLASH || MTD_NOR_FLASH
+ depends on !EFI_APP
+ default y
+
+config SYS_MONITOR_BASE
+ depends on HAVE_SYS_MONITOR_BASE
+ hex "Physical start address of boot monitor code"
+ default SYS_TEXT_BASE
+ help
+ The physical start address of boot monitor code (which is the same as
+ CONFIG_SYS_TEXT_BASE when linking) and the same as CONFIG_SYS_FLASH_BASE
+ when booting from flash.
+
+config SPL_SYS_MONITOR_BASE
+ depends on MPC85xx && SPL && HAVE_SYS_MONITOR_BASE
+ hex "Physical start address of SPL monitor code"
+ default SPL_TEXT_BASE
+
+config TPL_SYS_MONITOR_BASE
+ depends on MPC85xx && TPL && HAVE_SYS_MONITOR_BASE
+ hex "Physical start address of TPL monitor code"
+
config DYNAMIC_SYS_CLK_FREQ
bool "Determine CPU clock frequency at run-time"
help
CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
CONFIG_SYS_LOAD_ADDR=0xcc000000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0xCFF80000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
CONFIG_SYS_LOAD_ADDR=0xd4000000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0xD7F80000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_TARGET_M5208EVBE=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_NORFLASH_PS32BIT=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0xFFC00400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M5235EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M5249EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x200000
+CONFIG_SYS_MONITOR_BASE=0xFFE00400
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SYS_DEVICE_NULLDEV=y
CONFIG_TARGET_M5253DEMO=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_MONITOR_BASE=0xFF800400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M5272C3=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M5275EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="bootm ffe40000"
CONFIG_TARGET_M5282EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M53017EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2"
CONFIG_TARGET_M5329EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M5329EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_TARGET_M5373EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_SYS_DER=0x2002000F
CONFIG_SYS_LOAD_ADDR=0x200000
CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_MONITOR_BASE=0x04000000
CONFIG_BOOTDELAY=5
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="\nEnter password - autoboot in %d sec...\n"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_TARGET_ADP_AE3XX=y
CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="NDS32 # "
CONFIG_TARGET_ADP_AG101P=y
CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0x80000000
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="NDS32 # "
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_TARGET_AMCORE=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0xFFC00400
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="bootm ffc20000"
CONFIG_TARGET_ARMADILLO_800EVA=y
CONFIG_SYS_CLK_FREQ=50000000
CONFIG_SYS_LOAD_ADDR=0x44000000
+CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_BOOTDELAY=3
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_TARGET_ASTRO_MCF5373L=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS=" console=ttyS2,115200 rootfstype=romfs loaderversion=$loaderversion"
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_X86_OFFSET_SPL=0xffe80000
CONFIG_INTEL_ACPIGEN=y
CONFIG_INTEL_GENERIC_WIFI=y
+CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_CHROMEOS=y
CONFIG_BOOTSTAGE=y
CONFIG_SPL_BOOTSTAGE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_X86_OFFSET_U_BOOT=0xffee0000
+CONFIG_SYS_MONITOR_BASE=0xFFED0000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_TARGET_COBRA5272=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0xa0000000
CONFIG_TIMESTAMP=y
+CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_TARGET_COREBOOT=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_MONITOR_BASE=0x01120000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
CONFIG_TARGET_COREBOOT=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
CONFIG_TARGET_EB_CPU5282=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400"
+CONFIG_SYS_MONITOR_BASE=0xFF000400
CONFIG_BOOTDELAY=5
CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=-1
CONFIG_TARGET_EB_CPU5282=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418"
+CONFIG_SYS_MONITOR_BASE=0xF0000418
CONFIG_BOOTDELAY=5
CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=-1
CONFIG_TARGET_EDISON=y
CONFIG_SMP=y
CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_MONITOR_BASE=0x01101000
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
+CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
+CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
+CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
+CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_MONITOR_BASE=0xEBF40000
CONFIG_EVENT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ANDROID_BOOT_IMAGE=y
+CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv preboot;saveenv;"
CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ANDROID_BOOT_IMAGE=y
+CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv preboot;saveenv;"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_MONITOR_BASE=0x00F01000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr"
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_SYS_CLK_FREQ=60000000
CONFIG_TARGET_R2DPLUS=y
CONFIG_SYS_LOAD_ADDR=0x8e000000
+CONFIG_SYS_MONITOR_BASE=0xA0000000
CONFIG_BOOTDELAY=-1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC0,115200"
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77990-ebisu.dtb; booti 0x48080000 - 0x48000000"
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77995-draak.dtb; booti 0x48080000 - 0x48000000"
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-salvator-x.dtb; booti 0x48080000 - 0x48000000"
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-ulcb.dtb; booti 0x48080000 - 0x48000000"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_MONITOR_BASE=0xFFF80000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run boot_nor"
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_TIMESTAMP=y
+CONFIG_SYS_MONITOR_BASE=0x47E00400
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_DEFAULT_DEVICE_TREE="vexpress-v2p-ca9"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x90000000
+CONFIG_SYS_MONITOR_BASE=0x40000000
CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
CONFIG_DEFAULT_FDT_FILE="vexpress-v2p-ca9.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_XTFPGA_KC705=y
CONFIG_SYS_LOAD_ADDR=0x02000000
+CONFIG_SYS_MONITOR_BASE=0xF6000000
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=10
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_SDRAM_SIZE - \
- CONFIG_SYS_MONITOR_LEN)
#endif /* __CONFIG_H */
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_SDRAM_SIZE - \
- CONFIG_SYS_MONITOR_LEN)
#endif /* __CONFIG_H */
#define CONFIG_SYS_SDRAM_EMOD 0x80010000
#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
#endif
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-# define CONFIG_SYS_MONITOR_BASE 0x20000
-#else
-# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
#define CONFIG_SYS_MONITOR_LEN 0x40000
#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
#define CONFIG_SYS_SDRAM_SIZE 4 /* SDRAM size in MB */
#define CONFIG_SYS_FLASH_BASE 0xffe00000
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE 0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE 0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_INT_FLASH_BASE 0xf0000000
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
-/* If M5282 port is fully implemented the monitor base will be behind
- * the vector table. */
-#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#else
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
-#endif
-
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_SDRAM_EMOD 0x80010000
#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_SDRAM_EMOD 0x40010000
#define CONFIG_SYS_SDRAM_MODE 0x018D0000
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_SDRAM_EMOD 0x40010000
#define CONFIG_SYS_SDRAM_MODE 0x018D0000
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_MONITOR_LEN (320 << 10)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* Environment Configuration */
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_HWCONFIG /* enable hwconfig */
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE 0xD0001000
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
/* High Level Configuration Options */
#if defined(CONFIG_PCI)
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
#endif
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
#endif
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_RAMBOOT
#endif
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_SYS_RAMBOOT
#endif
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_SYS_FLASH_BASE 0xe0000000
#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define PHYS_FLASH_1 0x88000000 /* BANK 0 */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
#define CONFIG_SYS_FLASH_BASE (0x08000000)
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_SIZE 0x01000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#endif /* NOR support */
#endif /* ! __CONFIG_AM335X_EVM_H */
#define CONFIG_SYS_FLASH_BASE NAND_BASE
#endif
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
/* Defines for SPL */
/* amcore design has flash data bytes wired swapped */
#define CONFIG_SYS_WRITE_SWAPPED_DATA
/* reserve 128-4KB */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024)
#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
#define CONFIG_SYS_MHZ 200
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_MHZ 325
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_MHZ 375
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE)
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
#define CONFIG_SYS_FLASH_BASE 0x00000000
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#else
-/* This is mainly used during relocation in start.S */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
/* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_MONITOR_SEC 1:0-3
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
/* Address and size of Primary Environment Sector */
#define PHYS_FLASH_1 0x88000000 /* BANK 0 */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
/*
* Memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_BOOTPARAMS_LEN SZ_128K
#define CONFIG_SYS_CBSIZE SZ_512
-/* U-Boot */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#endif /* __CONFIG_BMIPS_COMMON_H */
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/*
* Console
*/
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* cached (KSEG0) address */
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/* NS16550-ish UARTs */
#define CONFIG_SYS_NS16550_CLK 48000000
#define CONFIG_SYS_FLASH_BASE 0xffe00000
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE 0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ)
#endif
-#define CONFIG_SYS_MONITOR_BASE 0x0
#define CONFIG_SYS_MONITOR_LEN 0x40000
/* Skip factory configuration block */
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
#define CONFIG_SYS_FLASH_BASE (0x08000000)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
/* Reduce SPL size by removing unlikey targets */
#endif /* NOR support */
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
/* RTC */
#include <linux/sizes.h>
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_SDRAM_BASE 0x10000000
#define CONFIG_SYS_SDRAM_SIZE SZ_16M
#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/* SPI */
/* Ethernet Controllor Driver */
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_CBSIZE 512
-/* U-Boot */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/* Environment settings */
/*
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
/*
* Memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
/*
* Memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
/*
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 0x1000)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/*----------------------------------------------------------------------
* Commands
*/
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \
CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */
/* Address and size of Redundant Environment Sector */
#define CONFIG_SYS_MAX_FLASH_SECT 64
#define CONFIG_SYS_MONITOR_LEN 0x00100000
-/*
- * Move up the U-Boot & monitor area if more flash is fitted.
- * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
- * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
- * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
- * embedded in the boot monitor(s) area
- */
-#if ( PHYS_FLASH_SIZE == 0x04000000 )
-
-#define CONFIG_SYS_MONITOR_BASE 0x27F40000
-
-#elif (PHYS_FLASH_SIZE == 0x02000000 )
-
-#define CONFIG_SYS_MONITOR_BASE 0x25F40000
-
-#else
-
-#define CONFIG_SYS_MONITOR_BASE 0x27F40000
-
-#endif
-
#endif /* __CONFIG_H */
* - Reading data from weird addresses
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define SRAM_BASE 0x30000000
#define SRAM_SIZE SZ_128K
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_BASE 0xF0000000
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_LEN 0x100000 /* 1Mbyte */
#define CONFIG_SYS_BOOTCOUNT_BE
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_LEN 0xc0000 /* 768k */
/*
#define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT)
#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT)
-#define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
#define CONFIG_STANDALONE_LOAD_ADDR 0x41000000
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_CBSIZE 512
-/* U-Boot */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/* Environment settings */
/*
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-/* start of monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
#include <asm/fsl_secure_boot.h>
#endif
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
/*
* Environment
*/
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
/* Environment */
#define CONFIG_SYS_BOOTM_LEN 0x8000000 /* 128 MB */
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
/*
* Environment
*/
#define OCRAM_NONSECURE_SIZE 0x00010000
#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/* I2C bus multiplexer */
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
#define I2C_MUX_CH_DEFAULT 0x8
/* Store environment at top of flash */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
/* LPUART */
#ifdef CONFIG_LPUART
#define CFG_LPUART_MUX_MASK 0xf0
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_QIXIS_I2C_ACCESS
/*
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
/*
* Environment
*/
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
/*
* Environment
*/
#endif
#endif
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
#define CONFIG_FSL_MEMAC
/* MMC */
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM 0
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
#define CONFIG_FSL_MEMAC
#ifndef SPL_NO_ENV
/*
* Memory map
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#ifdef CONFIG_64BIT
# define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
/*
* Memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#endif
#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/* Partitions name */
#define PARTS_BOOT "boot"
#define PARTS_ROOT "platform"
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_SIZE 0x4000000
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
/* Defines for SPL */
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/* Power Down Modes */
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
-#ifndef CONFIG_SYS_MONITOR_BASE
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE 0xf8f81000
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-#endif
-
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
#define CONFIG_SYS_SDRAM_BASE 0x88000000
#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
/* Memory Test */
#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */
#endif /* __CONFIG_H */
#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_HWCONFIG
#define CONFIG_SYS_INIT_RAM_ADDR 0x00100000
#define CONFIG_SYS_PBSIZE 256
/* Address of u-boot image in Flash */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (RCAR_GEN2_UBOOT_SDRAM_SIZE)
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
/* Timer */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE)
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (1 * 1024 * 1024)
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
* System memory Configuration
*/
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MEM_SIZE 0x40000000
#define CONFIG_SYS_SDRAM_BASE 0x71000000
#define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */
#define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
/* FLASH and environment organization */
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_SYS_SDRAM_SIZE \
(SB_TO_UL(CONFIG_SANDBOX_RAM_SIZE_MB) << 20)
-#define CONFIG_SYS_MONITOR_BASE 0
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
/*
* U-Boot general configurations
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */
#define CPU_RELEASE_ADDR 0xFFD12210
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
#define CONFIG_SERIAL_BOOT
#endif
-#if defined(CONFIG_SERIAL_BOOT)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
/* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
/*
* Memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_MHZ 280
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0xa0000000
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
#define BOOTENV
#endif
-#define CONFIG_SYS_MONITOR_BASE 0
#define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#error Unknown DDR size - please add!
#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)
#define VCOREIII_DEFAULT_MTD_ENV \
"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
#define CONFIG_SYS_FLASH_SIZE 0x04000000
#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
/* Timeout values in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_CBSIZE 512
-/* U-Boot */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
/* Environment settings */
#endif //__VOCORE2_CONFIG_H__
*/
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*-----------------------------------------------------------------------
* Environment configuration
# define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */
# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */
# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000)
-# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#elif defined(CONFIG_XTFPGA_KC705)
# define CONFIG_SYS_FLASH_SIZE 0x8000000 /* 128MB */
# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */
# define CONFIG_SYS_FLASH_BASE IOADDR(0x00000000)
-# define CONFIG_SYS_MONITOR_BASE IOADDR(0x06000000)
#else
# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* 16MB */
# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */
# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000)
-# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#endif
#define CONFIG_SYS_MAX_FLASH_SECT \
(CONFIG_SYS_FLASH_SECT_SZ/CONFIG_SYS_FLASH_PARMSECT_SZ + \
projects / u-boot.git / commitdiff