xilinx: zynqmp: Enable pmufw config reloading

PMU FW has functionality to accept and reload configuration object at run
time. The patch is adding support for doing it via u-boot prompt.

For example:
tftpboot 100000 pmu_obj.bin
zynqmp pmufw 100000 $filesize

The most of pmufw configurations don't allow config reloading.
Also official Xilinx PMUFW doens't support this feature properly but the
patch should open a way to call PMUFW with this request.

Here is example of PMUFW config fragment which enables config reloading.

/* SET CONFIG SECTION */
PM_CONFIG_SET_CONFIG_SECTION_ID,        /* Section ID */
PM_CONFIG_IPI_PSU_CORTEXA53_0_MASK | PM_CONFIG_IPI_PSU_CORTEXR5_0_MASK |
PM_CONFIG_IPI_PSU_CORTEXR5_1_MASK, /* Permissions to set config */

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/board/xilinx/zynqmp/cmds.c b/board/xilinx/zynqmp/cmds.c
index 0f1f26986f21309d2611d99f4841dd962ccaa1bc..c0d28a73e45dad55737a899d7592acaff5cb4693 100644 (file)
--- a/board/xilinx/zynqmp/cmds.c
+++ b/board/xilinx/zynqmp/cmds.c
@@ -130,8 +130,27 @@ static int do_zynqmp_tcm_init(struct cmd_tbl *cmdtp, int flag, int argc,
 }
 #endif
 
+static int do_zynqmp_pmufw(struct cmd_tbl *cmdtp, int flag, int argc,
+                          char * const argv[])
+{
+       u32 addr, size;
+
+       if (argc != cmdtp->maxargs)
+               return CMD_RET_USAGE;
+
+       addr = simple_strtoul(argv[2], NULL, 16);
+       size = simple_strtoul(argv[3], NULL, 16);
+       flush_dcache_range((ulong)addr, (ulong)(addr + size));
+
+       zynqmp_pmufw_load_config_object((const void *)(uintptr_t)addr,
+                                       (size_t)size);
+
+       return 0;
+}
+
 static struct cmd_tbl cmd_zynqmp_sub[] = {
        U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""),
+       U_BOOT_CMD_MKENT(pmufw, 4, 0, do_zynqmp_pmufw, "", ""),
        U_BOOT_CMD_MKENT(mmio_read, 3, 0, do_zynqmp_mmio_read, "", ""),
        U_BOOT_CMD_MKENT(mmio_write, 5, 0, do_zynqmp_mmio_write, "", ""),
 #ifdef CONFIG_DEFINE_TCM_OCM_MMAP
@@ -184,6 +203,7 @@ static char zynqmp_help_text[] =
        "                      to be initialized. Supported modes will be\n"
        "                      lock(0)/split(1)\n"
 #endif
+       "zynqmp pmufw address size - load PMU FW configuration object\n"
        ;
 #endif