]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
rockchip: rk3399-firefly: Sync DT from v6.8 and update defconfig
authorJonas Karlman <jonas@kwiboo.se>
Wed, 1 May 2024 16:22:29 +0000 (16:22 +0000)
committerKever Yang <kever.yang@rock-chips.com>
Tue, 7 May 2024 07:56:09 +0000 (15:56 +0800)
Sync rk3399-firefly device tree from Linux kernel v6.8.

Change to SPL_MAX_SIZE=0x40000, SPL can be up to 256 KiB.

Add ROCKCHIP_IODOMAIN=y to configure io-domain voltage.

Add MMC_SDHCI_SDMA=y to use DMA transfer for eMMC.

Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.

Add PHY_ROCKCHIP_INNO_USB2=y and PHY_ROCKCHIP_TYPEC=y to support USB PHY.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/dts/rk3399-firefly.dts
configs/firefly-rk3399_defconfig

index c4dd2a6b4836830e99e63569f54255637637ff58..260415d99aebf8fcb301bd6e3d32354eb4d1f63d 100644 (file)
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3399.dtsi"
@@ -15,6 +16,7 @@
        compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
        aliases {
+               ethernet0 = &gmac;
                mmc0 = &sdio0;
                mmc1 = &sdmmc;
                mmc2 = &sdhci;
@@ -86,7 +88,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pwrbtn>;
 
-               power {
+               key-power {
                        debounce-interval = <100>;
                        gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
                        label = "GPIO Key Power";
        vdd_log: vdd-log {
                compatible = "pwm-regulator";
                pwms = <&pwm2 0 25000 1>;
+               pwm-supply = <&vcc_sys>;
                regulator-name = "vdd_log";
                regulator-always-on;
                regulator-boot-on;
                regulator-min-microvolt = <430000>;
                regulator-max-microvolt = <1400000>;
-               vin-supply = <&vcc_sys>;
        };
 };
 
        status = "okay";
 };
 
+&gpu {
+       mali-supply = <&vdd_gpu>;
+       status = "okay";
+};
+
 &hdmi {
        ddc-i2c-bus = <&i2c3>;
        pinctrl-names = "default";
        sd-uhs-sdr104;
 
        /* Power supply */
-       vqmmc-supply = &vcc1v8_s3;      /* IO line */
-       vmmc-supply = &vcc_sdio;        /* card's power */
+       vqmmc-supply = <&vcc1v8_s3>;    /* IO line */
+       vmmc-supply = <&vcc_sdio>;      /* card's power */
 
        #address-cells = <1>;
        #size-cells = <0>;
                reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&gpio0>;
-               interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+               interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "host-wake";
                brcm,drive-strength = <5>;
                pinctrl-names = "default";
index db98926b627aeec3301df981b8aeb32e2c73ee6e..9c94ac2f3012dd4de4173acbdd94d0608cc375ab 100644 (file)
@@ -16,7 +16,7 @@ CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
@@ -34,13 +34,19 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
 CONFIG_NVME_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
@@ -61,5 +67,4 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y