ARM: uniphier: use pr_() instead of printf() where appropriate

Replace printf() with pr_() to specify proper loglevel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/arch/arm/mach-uniphier/arm32/psci.c b/arch/arm/mach-uniphier/arm32/psci.c
index 3ab101a9cfe80d14f0c57cfb80f326d3253e8a60..efe7419cc962dd6a8fc6d1dd762df314d741b492 100644 (file)
--- a/arch/arm/mach-uniphier/arm32/psci.c
+++ b/arch/arm/mach-uniphier/arm32/psci.c
@@ -7,8 +7,10 @@
 
 #include <common.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/printk.h>
 #include <linux/psci.h>
 #include <linux/sizes.h>
 #include <asm/processor.h>
@@ -91,7 +93,7 @@ static void uniphier_smp_kick_all_cpus(void)
        }
 
        if (!timeout)
-               printf("warning: some of secondary CPUs may not boot\n");
+               pr_warn("warning: some of secondary CPUs may not boot\n");
 
        uniphier_cache_disable();
 }

diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c
index b9a2cbe14865454f7939d774a8177ed2ca3e0211..6849b3dcabac4afbbcfcacf2a94f1889d74f6acc 100644 (file)
--- a/arch/arm/mach-uniphier/board_late_init.c
+++ b/arch/arm/mach-uniphier/board_late_init.c
@@ -10,7 +10,9 @@
 #include <spl.h>
 #include <libfdt.h>
 #include <nand.h>
+#include <stdio.h>
 #include <linux/io.h>
+#include <linux/printk.h>
 #include <../drivers/mtd/nand/denali.h>
 
 #include "init.h"
@@ -92,7 +94,7 @@ int board_late_init(void)
        printf("\n");
 
        if (uniphier_set_fdt_file())
-               printf("fdt_file environment was not set correctly\n");
+               pr_warn("fdt_file environment was not set correctly\n");
 
        return 0;
 }

diff --git a/arch/arm/mach-uniphier/boot-device/boot-device.c b/arch/arm/mach-uniphier/boot-device/boot-device.c
index 0f93926f28faa9bc11644fecbdef12ff87abc495..2818b506c40a59b9e416eecc7ffd407923735337 100644 (file)
--- a/arch/arm/mach-uniphier/boot-device/boot-device.c
+++ b/arch/arm/mach-uniphier/boot-device/boot-device.c
@@ -7,6 +7,7 @@
 
 #include <common.h>
 #include <spl.h>
+#include <stdio.h>
 #include <linux/log2.h>
 
 #include "../init.h"

diff --git a/arch/arm/mach-uniphier/cpu-info.c b/arch/arm/mach-uniphier/cpu-info.c
index 90ef4110871f354c44b3490a18c6a53f91e0f979..bf41d0561cf24a9448b96f82845fbfeeeaead83a 100644 (file)
--- a/arch/arm/mach-uniphier/cpu-info.c
+++ b/arch/arm/mach-uniphier/cpu-info.c
@@ -6,9 +6,10 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#include <common.h>
+#include <stdio.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/printk.h>
 
 #include "soc-info.h"
 
@@ -59,11 +60,11 @@ int print_cpuinfo(void)
        printf(" (model %d, revision %d)\n", model, rev);
 
        if (model < required_model) {
-               printf("Only model %d or newer is supported.\n",
+               pr_err("Only model %d or newer is supported.\n",
                       required_model);
                return -ENOTSUPP;
        } else if (rev < required_rev) {
-               printf("Only revision %d or newer is supported.\n",
+               pr_err("Only revision %d or newer is supported.\n",
                       required_rev);
                return -ENOTSUPP;
        }

diff --git a/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c b/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
index 873dad229acf76d45e220b7f767a5f89f56c8370..50f0dde5445852188624ce86e9bb856a3b814f30 100644 (file)
--- a/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
+++ b/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
@@ -6,7 +6,9 @@
  */
 
 #include <common.h>
+#include <stdio.h>
 #include <linux/io.h>
+#include <linux/printk.h>
 #include <linux/sizes.h>
 
 #include "../soc-info.h"
@@ -297,7 +299,7 @@ static int do_ddrm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
        param = uniphier_get_ddrmphy_param();
        if (!param) {
-               printf("unsupported SoC\n");
+               pr_err("unsupported SoC\n");
                return CMD_RET_FAILURE;
        }
 

diff --git a/arch/arm/mach-uniphier/dram/cmd_ddrphy.c b/arch/arm/mach-uniphier/dram/cmd_ddrphy.c
index a71f704b0c8b0e1f1f0dd15d1ff55b4dfbaa2c4a..0283edaeda6bd7b6efd0b9461f5c3f6e6c25cde8 100644 (file)
--- a/arch/arm/mach-uniphier/dram/cmd_ddrphy.c
+++ b/arch/arm/mach-uniphier/dram/cmd_ddrphy.c
@@ -7,7 +7,9 @@
  */
 
 #include <common.h>
+#include <stdio.h>
 #include <linux/io.h>
+#include <linux/printk.h>
 #include <linux/sizes.h>
 
 #include "../soc-info.h"
@@ -267,7 +269,7 @@ static int do_ddr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
        param = uniphier_get_ddrphy_param();
        if (!param) {
-               printf("unsupported SoC\n");
+               pr_err("unsupported SoC\n");
                return CMD_RET_FAILURE;
        }
 

diff --git a/arch/arm/mach-uniphier/dram/ddrphy-ld4.c b/arch/arm/mach-uniphier/dram/ddrphy-ld4.c
index c20730d82094bd9e7d8b97a881806e69a527dcc7..ba3d314841d684d0e2568870a8914cc2d04d1a08 100644 (file)
--- a/arch/arm/mach-uniphier/dram/ddrphy-ld4.c
+++ b/arch/arm/mach-uniphier/dram/ddrphy-ld4.c
@@ -5,9 +5,10 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#include <common.h>
+#include <linux/bitops.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/printk.h>
 
 #include "ddrphy-init.h"
 #include "ddrphy-regs.h"
@@ -41,7 +42,7 @@ int uniphier_ld4_ddrphy_init(void __iomem *phy_base, int freq, bool ddr3plus)
                freq_e = DRAM_FREQ_1600M;
                break;
        default:
-               printf("unsupported DRAM frequency %d MHz\n", freq);
+               pr_err("unsupported DRAM frequency %d MHz\n", freq);
                return -EINVAL;
        }
 

diff --git a/arch/arm/mach-uniphier/dram/umc-pxs2.c b/arch/arm/mach-uniphier/dram/umc-pxs2.c
index 8068ef13882e9af678ee2ea55325be94d5401742..fccdb98ed822822589504ac77d69547f32a895ee 100644 (file)
--- a/arch/arm/mach-uniphier/dram/umc-pxs2.c
+++ b/arch/arm/mach-uniphier/dram/umc-pxs2.c
@@ -8,11 +8,13 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#include <common.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/printk.h>
 #include <linux/sizes.h>
 #include <asm/processor.h>
+#include <time.h>
 
 #include "../init.h"
 #include "../soc-info.h"
@@ -134,7 +136,7 @@ static int ddrphy_get_system_latency(void __iomem *phy_base, int width)
        }
 
        if (dgsl_min != dgsl_max)
-               printf("DQS Gateing System Latencies are not all leveled.\n");
+               pr_warn("DQS Gateing System Latencies are not all leveled.\n");
 
        return dgsl_max;
 }
@@ -149,7 +151,7 @@ static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width,
 
        nr_dx = width / 8;
 
-       writel(MPHY_PIR_ZCALBYP,        phy_base + MPHY_PIR);
+       writel(MPHY_PIR_ZCALBYP, phy_base + MPHY_PIR);
        /*
         * Disable RGLVT bit (Read DQS Gating LCDL Delay VT Compensation)
         * to avoid read error issue.
@@ -315,8 +317,10 @@ static int __ddrphy_training(void __iomem *phy_base,
        u32 init_flag = MPHY_PIR_INIT;
        u32 done_flag = MPHY_PGSR0_IDONE;
        int timeout = 50000; /* 50 msec is long enough */
-#ifdef DISPLAY_ELAPSED_TIME
-       ulong start = get_timer(0);
+       unsigned long start = 0;
+
+#ifdef DEBUG
+       start = get_timer(0);
 #endif
 
        for (s = seq; s->description; s++) {
@@ -344,9 +348,7 @@ static int __ddrphy_training(void __iomem *phy_base,
                }
        }
 
-#ifdef DISPLAY_ELAPSED_TIME
-       printf("%s: info: elapsed time %ld msec\n", get_timer(start));
-#endif
+       pr_debug("DDRPHY training: elapsed time %ld msec\n", get_timer(start));
 
        return 0;
 }

diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c
index 22136855fa1a4ba04fdca5884b3978327992486b..e9672d2f1bc3211dd795479b07626f19d2e03e72 100644 (file)
--- a/arch/arm/mach-uniphier/dram_init.c
+++ b/arch/arm/mach-uniphier/dram_init.c
@@ -10,7 +10,10 @@
 #include <fdt_support.h>
 #include <fdtdec.h>
 #include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
 #include <linux/sizes.h>
+#include <asm/global_data.h>
 
 #include "sg-regs.h"
 #include "soc-info.h"
@@ -264,8 +267,8 @@ int ft_board_setup(void *fdt, bd_t *bd)
                if (ret)
                        return -ENOSPC;
 
-               printf("   Reserved memory region for DRAM PHY training: addr=%lx size=%lx\n",
-                      rsv_addr, rsv_size);
+               pr_notice("   Reserved memory region for DRAM PHY training: addr=%lx size=%lx\n",
+                         rsv_addr, rsv_size);
        }
 
        return 0;