T: git git://git.denx.de/u-boot-mips.git
F: arch/mips/
+MIPS MSCC
+M: Gregory CLEMENT <gregory.clement@bootlin.com>
+M: Lars Povlsen <lars.povlsen@microchip.com>
+M: Horatiu Vultur <horatiu.vultur@microchip.com>
+S: Maintained
+F: arch/mips/mach-mscc/
+
MMC
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Maintained
select OF_CONTROL
imply CMD_DM
+config ARCH_MSCC
+ bool "Support MSCC VCore-III"
+ select OF_CONTROL
+ select DM
+
config ARCH_BMIPS
bool "Support BMIPS SoCs"
select CLK
source "board/micronas/vct/Kconfig"
source "board/qemu-mips/Kconfig"
source "arch/mips/mach-ath79/Kconfig"
+source "arch/mips/mach-mscc/Kconfig"
source "arch/mips/mach-bmips/Kconfig"
source "arch/mips/mach-pic32/Kconfig"
source "arch/mips/mach-mt7620/Kconfig"
machine-$(CONFIG_ARCH_BMIPS) += bmips
machine-$(CONFIG_MACH_PIC32) += pic32
machine-$(CONFIG_ARCH_MT7620) += mt7620
+machine-$(CONFIG_ARCH_MSCC) += mscc
machdirs := $(patsubst %,arch/mips/mach-%/,$(machine-y))
libs-y += $(machdirs)
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+menu "MSCC VCore-III platforms"
+ depends on ARCH_MSCC
+
+config SOC_VCOREIII
+ select MIPS_TUNE_24KC
+ select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
+ bool
+
+config SYS_SOC
+ default "mscc"
+
+config SOC_OCELOT
+ bool
+ select SOC_VCOREIII
+ help
+ This supports MSCC Ocelot family of SOCs.
+
+config SYS_CONFIG_NAME
+ default "vcoreiii"
+
+choice
+ prompt "Board select"
+
+config TARGET_OCELOT_PCB120
+ bool "MSCC PCB120 Reference Board (aka VSC5635EV)"
+ select SOC_OCELOT
+ help
+ When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
+ ocelot_pcb120
+
+config TARGET_OCELOT_PCB123
+ bool "MSCC PCB123 Reference Board (aka VSC7514EV))"
+ select SOC_OCELOT
+ help
+ When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
+ ocelot_pcb123
+
+endchoice
+
+choice
+ prompt "DDR type"
+
+config DDRTYPE_H5TQ4G63MFR
+ bool "Hynix H5TQ4G63MFR-PBC (4Gbit, DDR3-800, 256Mbitx16)"
+
+config DDRTYPE_MT41K256M16
+ bool "Micron MT41K256M16 (4Gbit, DDR3L-800, 256Mbitx16)"
+
+config DDRTYPE_H5TQ1G63BFA
+ bool "Hynix H5TQ1G63BFA (1Gbit DDR3, x16)"
+
+config DDRTYPE_MT41J128M16HA
+ bool "Micron MT41J128M16HA-15E:D (2Gbit DDR3, x16)"
+
+config DDRTYPE_MT41K128M16JT
+ bool "Micron MT41K128M16JT-125 (2Gbit DDR3L, 128Mbitx16)"
+
+config DDRTYPE_MT47H128M8HQ
+ bool "Micron MT47H128M8-3 (1Gbit, DDR-533@CL4 @ 4.80ns 16Mbisx8x8)"
+
+endchoice
+
+endmenu
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+CFLAGS_cpu.o += -finline-limit=64000
+
+obj-y += cpu.o dram.o reset.o lowlevel_init.o
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/types.h>
+
+#include <mach/tlb.h>
+#include <mach/ddr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if CONFIG_SYS_SDRAM_SIZE <= SZ_64M
+#define MSCC_RAM_TLB_SIZE SZ_64M
+#define MSCC_ATTRIB2 MMU_REGIO_INVAL
+#elif CONFIG_SYS_SDRAM_SIZE <= SZ_128M
+#define MSCC_RAM_TLB_SIZE SZ_64M
+#define MSCC_ATTRIB2 MMU_REGIO_RW
+#elif CONFIG_SYS_SDRAM_SIZE <= SZ_256M
+#define MSCC_RAM_TLB_SIZE SZ_256M
+#define MSCC_ATTRIB2 MMU_REGIO_INVAL
+#elif CONFIG_SYS_SDRAM_SIZE <= SZ_512M
+#define MSCC_RAM_TLB_SIZE SZ_256M
+#define MSCC_ATTRIB2 MMU_REGIO_RW
+#else
+#define MSCC_RAM_TLB_SIZE SZ_512M
+#define MSCC_ATTRIB2 MMU_REGIO_RW
+#endif
+
+/* NOTE: lowlevel_init() function does not have access to the
+ * stack. Thus, all called functions must be inlined, and (any) local
+ * variables must be kept in registers.
+ */
+void vcoreiii_tlb_init(void)
+{
+ register int tlbix = 0;
+
+ /*
+ * Unlike most of the MIPS based SoCs, the IO register address
+ * are not in KSEG0. The mainline linux kernel built in legacy
+ * mode needs to access some of the registers very early in
+ * the boot and make the assumption that the bootloader has
+ * already configured them, so we have to match this
+ * expectation.
+ */
+ create_tlb(tlbix++, MSCC_IO_ORIGIN1_OFFSET, SZ_16M, MMU_REGIO_RW,
+ MMU_REGIO_RW);
+
+#if CONFIG_SYS_TEXT_BASE == MSCC_FLASH_TO
+ /*
+ * If U-Boot is located in NOR then we want to be able to use
+ * the data cache in order to boot in a decent duration
+ */
+ create_tlb(tlbix++, MSCC_FLASH_TO, SZ_16M, MMU_REGIO_RO_C,
+ MMU_REGIO_RO_C);
+ create_tlb(tlbix++, MSCC_FLASH_TO + SZ_32M, SZ_16M, MMU_REGIO_RO_C,
+ MMU_REGIO_RO_C);
+
+ /*
+ * Using cache for RAM also helps to improve boot time. Thanks
+ * to this the time to relocate U-Boot in RAM went from 2.092
+ * secs to 0.104 secs.
+ */
+ create_tlb(tlbix++, MSCC_DDR_TO, MSCC_RAM_TLB_SIZE, MMU_REGIO_RW,
+ MSCC_ATTRIB2);
+
+ /* Enable caches by clearing the bit ERL, which is set on reset */
+ write_c0_status(read_c0_status() & ~BIT(2));
+#endif /* CONFIG_SYS_TEXT_BASE */
+}
+
+int mach_cpu_init(void)
+{
+ /* Speed up NOR flash access */
+ writel(ICPU_SPI_MST_CFG_CS_DESELECT_TIME(0x19) +
+ ICPU_SPI_MST_CFG_CLK_DIV(9), BASE_CFG + ICPU_SPI_MST_CFG);
+ /*
+ * Legacy and mainline linux kernel expect that the
+ * interruption map was set as it was done by redboot.
+ */
+ writel(~0, BASE_CFG + ICPU_DST_INTR_MAP(0));
+ writel(0, BASE_CFG + ICPU_DST_INTR_MAP(1));
+ writel(0, BASE_CFG + ICPU_DST_INTR_MAP(2));
+ writel(0, BASE_CFG + ICPU_DST_INTR_MAP(3));
+
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/types.h>
+
+#include <mach/tlb.h>
+#include <mach/ddr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline int vcoreiii_train_bytelane(void)
+{
+ int ret;
+
+ ret = hal_vcoreiii_train_bytelane(0);
+
+ if (ret)
+ return ret;
+ ret = hal_vcoreiii_train_bytelane(1);
+
+ return ret;
+}
+
+int vcoreiii_ddr_init(void)
+{
+ int res;
+
+ if (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT)
+ & ICPU_MEMCTRL_STAT_INIT_DONE)) {
+ hal_vcoreiii_init_memctl();
+ hal_vcoreiii_wait_memctl();
+ if (hal_vcoreiii_init_dqs() || vcoreiii_train_bytelane())
+ hal_vcoreiii_ddr_failed();
+ }
+#if (CONFIG_SYS_TEXT_BASE != 0x20000000)
+ res = dram_check();
+ if (res == 0)
+ hal_vcoreiii_ddr_verified();
+ else
+ hal_vcoreiii_ddr_failed();
+
+ /* Clear boot-mode and read-back to activate/verify */
+ clrbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
+ ICPU_GENERAL_CTRL_BOOT_MODE_ENA);
+ readl(BASE_CFG + ICPU_GENERAL_CTRL);
+#else
+ res = 0;
+#endif
+ return res;
+}
+
+int print_cpuinfo(void)
+{
+ printf("MSCC VCore-III MIPS 24Kec\n");
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ while (vcoreiii_ddr_init())
+ ;
+
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ return 0;
+}
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_MSCC_IOREMAP_H
+#define __ASM_MACH_MSCC_IOREMAP_H
+
+#include <linux/types.h>
+#include <mach/common.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr,
+ phys_addr_t size)
+{
+ return phys_addr;
+}
+
+static inline int is_vcoreiii_internal_registers(phys_addr_t offset)
+{
+ if ((offset >= MSCC_IO_ORIGIN1_OFFSET &&
+ offset < (MSCC_IO_ORIGIN1_OFFSET + MSCC_IO_ORIGIN1_SIZE)) ||
+ (offset >= MSCC_IO_ORIGIN2_OFFSET &&
+ offset < (MSCC_IO_ORIGIN2_OFFSET + MSCC_IO_ORIGIN2_SIZE)))
+ return 1;
+
+ return 0;
+}
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+ unsigned long flags)
+{
+ if (is_vcoreiii_internal_registers(offset))
+ return (void __iomem *)offset;
+
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return is_vcoreiii_internal_registers((unsigned long)addr);
+}
+
+#define _page_cachable_default _CACHE_CACHABLE_NONCOHERENT
+
+#endif /* __ASM_MACH_MSCC_IOREMAP_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_COMMON_H
+#define __ASM_MACH_COMMON_H
+
+#if defined(CONFIG_SOC_OCELOT)
+#include <mach/ocelot/ocelot.h>
+#include <mach/ocelot/ocelot_devcpu_gcb.h>
+#include <mach/ocelot/ocelot_icpu_cfg.h>
+#else
+#error Unsupported platform
+#endif
+
+#define MSCC_DDR_TO 0x20000000 /* DDR RAM base offset */
+#define MSCC_MEMCTL1_TO 0x40000000 /* SPI/PI base offset */
+#define MSCC_MEMCTL2_TO 0x50000000 /* SPI/PI base offset */
+#define MSCC_FLASH_TO MSCC_MEMCTL1_TO /* Flash base offset */
+
+#define VCOREIII_TIMER_DIVIDER 25 /* Clock tick ~ 0.1 us */
+
+#endif /* __ASM_MACH_COMMON_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_DDR_H
+#define __ASM_MACH_DDR_H
+
+#include <asm/cacheops.h>
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <mach/common.h>
+
+#define MIPS_VCOREIII_MEMORY_DDR3
+#define MIPS_VCOREIII_DDR_SIZE CONFIG_SYS_SDRAM_SIZE
+
+#if defined(CONFIG_DDRTYPE_H5TQ1G63BFA) /* Serval1 Refboard */
+
+/* Hynix H5TQ1G63BFA (1Gbit DDR3, x16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt 3
+#define VC3_MPAR_row_addr_cnt 13
+#define VC3_MPAR_col_addr_cnt 10
+#define VC3_MPAR_tREFI 2437
+#define VC3_MPAR_tRAS_min 12
+#define VC3_MPAR_CL 6
+#define VC3_MPAR_tWTR 4
+#define VC3_MPAR_tRC 16
+#define VC3_MPR_tFAW 16
+#define VC3_MPAR_tRP 5
+#define VC3_MPAR_tRRD 4
+#define VC3_MPAR_tRCD 5
+#define VC3_MPAR_tMRD 4
+#define VC3_MPAR_tRFC 35
+#define VC3_MPAR_CWL 5
+#define VC3_MPAR_tXPR 38
+#define VC3_MPAR_tMOD 12
+#define VC3_MPAR_tDLLK 512
+#define VC3_MPAR_tWR 5
+
+#elif defined(CONFIG_DDRTYPE_MT41J128M16HA) /* Validation board */
+
+/* Micron MT41J128M16HA-15E:D (2Gbit DDR3, x16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt 3
+#define VC3_MPAR_row_addr_cnt 14
+#define VC3_MPAR_col_addr_cnt 10
+#define VC3_MPAR_tREFI 2437
+#define VC3_MPAR_tRAS_min 12
+#define VC3_MPAR_CL 5
+#define VC3_MPAR_tWTR 4
+#define VC3_MPAR_tRC 16
+#define VC3_MPAR_tFAW 16
+#define VC3_MPAR_tRP 5
+#define VC3_MPAR_tRRD 4
+#define VC3_MPAR_tRCD 5
+#define VC3_MPAR_tMRD 4
+#define VC3_MPAR_tRFC 50
+#define VC3_MPAR_CWL 5
+#define VC3_MPAR_tXPR 54
+#define VC3_MPAR_tMOD 12
+#define VC3_MPAR_tDLLK 512
+#define VC3_MPAR_tWR 5
+
+#elif defined(CONFIG_DDRTYPE_MT41K256M16) /* JR2 Validation board */
+
+/* Micron MT41K256M16 (4Gbit, DDR3L-800, 256Mbitx16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt 3
+#define VC3_MPAR_row_addr_cnt 15
+#define VC3_MPAR_col_addr_cnt 10
+#define VC3_MPAR_tREFI 2437
+#define VC3_MPAR_tRAS_min 12
+#define VC3_MPAR_CL 5
+#define VC3_MPAR_tWTR 4
+#define VC3_MPAR_tRC 16
+#define VC3_MPAR_tFAW 16
+#define VC3_MPAR_tRP 5
+#define VC3_MPAR_tRRD 4
+#define VC3_MPAR_tRCD 5
+#define VC3_MPAR_tMRD 4
+#define VC3_MPAR_tRFC 82
+#define VC3_MPAR_CWL 5
+#define VC3_MPAR_tXPR 85
+#define VC3_MPAR_tMOD 12
+#define VC3_MPAR_tDLLK 512
+#define VC3_MPAR_tWR 5
+
+#elif defined(CONFIG_DDRTYPE_H5TQ4G63MFR) /* JR2 Reference board */
+
+/* Hynix H5TQ4G63MFR-PBC (4Gbit, DDR3-800, 256Mbitx16) - 2kb pages @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt 3
+#define VC3_MPAR_row_addr_cnt 15
+#define VC3_MPAR_col_addr_cnt 10
+#define VC3_MPAR_tREFI 2437
+#define VC3_MPAR_tRAS_min 12
+#define VC3_MPAR_CL 6
+#define VC3_MPAR_tWTR 4
+#define VC3_MPAR_tRC 17
+#define VC3_MPAR_tFAW 16
+#define VC3_MPAR_tRP 5
+#define VC3_MPAR_tRRD 4
+#define VC3_MPAR_tRCD 5
+#define VC3_MPAR_tMRD 4
+#define VC3_MPAR_tRFC 82
+#define VC3_MPAR_CWL 5
+#define VC3_MPAR_tXPR 85
+#define VC3_MPAR_tMOD 12
+#define VC3_MPAR_tDLLK 512
+#define VC3_MPAR_tWR 5
+
+#elif defined(CONFIG_DDRTYPE_MT41K128M16JT)
+
+/* Micron Micron MT41K128M16JT-125 (2Gbit DDR3L, 128Mbitx16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt 3
+#define VC3_MPAR_row_addr_cnt 14
+#define VC3_MPAR_col_addr_cnt 10
+#define VC3_MPAR_tREFI 2437
+#define VC3_MPAR_tRAS_min 12
+#define VC3_MPAR_CL 6
+#define VC3_MPAR_tWTR 4
+#define VC3_MPAR_tRC 16
+#define VC3_MPAR_tFAW 16
+#define VC3_MPAR_tRP 5
+#define VC3_MPAR_tRRD 4
+#define VC3_MPAR_tRCD 5
+#define VC3_MPAR_tMRD 4
+#define VC3_MPAR_tRFC 82
+#define VC3_MPAR_CWL 5
+#define VC3_MPAR_tXPR 85
+#define VC3_MPAR_tMOD 12
+#define VC3_MPAR_tDLLK 512
+#define VC3_MPAR_tWR 5
+
+#elif defined(CONFIG_DDRTYPE_MT47H128M8HQ) /* Luton10/26 Refboards */
+
+/* Micron 1Gb MT47H128M8-3 16Meg x 8 x 8 banks, DDR-533@CL4 @ 4.80ns */
+#define VC3_MPAR_bank_addr_cnt 3
+#define VC3_MPAR_row_addr_cnt 14
+#define VC3_MPAR_col_addr_cnt 10
+#define VC3_MPAR_tREFI 1625
+#define VC3_MPAR_tRAS_min 9
+#define VC3_MPAR_CL 4
+#define VC3_MPAR_tWTR 2
+#define VC3_MPAR_tRC 12
+#define VC3_MPAR_tFAW 8
+#define VC3_MPAR_tRP 4
+#define VC3_MPAR_tRRD 2
+#define VC3_MPAR_tRCD 4
+
+#define VC3_MPAR_tRPA 4
+#define VC3_MPAR_tRP 4
+
+#define VC3_MPAR_tMRD 2
+#define VC3_MPAR_tRFC 27
+
+#define VC3_MPAR__400_ns_dly 84
+
+#define VC3_MPAR_tWR 4
+#undef MIPS_VCOREIII_MEMORY_DDR3
+#else
+
+#error Unknown DDR system configuration - please add!
+
+#endif
+
+#ifdef CONFIG_SOC_OCELOT
+#define MIPS_VCOREIII_MEMORY_16BIT 1
+#endif
+
+#define MIPS_VCOREIII_MEMORY_SSTL_ODT 7
+#define MIPS_VCOREIII_MEMORY_SSTL_DRIVE 7
+#define VCOREIII_DDR_DQS_MODE_CALIBRATE
+
+#ifdef MIPS_VCOREIII_MEMORY_16BIT
+#define VC3_MPAR_16BIT 1
+#else
+#define VC3_MPAR_16BIT 0
+#endif
+
+#ifdef MIPS_VCOREIII_MEMORY_DDR3
+#define VC3_MPAR_DDR3_MODE 1 /* DDR3 */
+#define VC3_MPAR_BURST_LENGTH 8 /* Always 8 (1) for DDR3 */
+#ifdef MIPS_VCOREIII_MEMORY_16BIT
+#define VC3_MPAR_BURST_SIZE 1 /* Always 1 for DDR3/16bit */
+#else
+#define VC3_MPAR_BURST_SIZE 0
+#endif
+#else
+#define VC3_MPAR_DDR3_MODE 0 /* DDR2 */
+#ifdef MIPS_VCOREIII_MEMORY_16BIT
+#define VC3_MPAR_BURST_LENGTH 4 /* in DDR2 16-bit mode, use burstlen 4 */
+#else
+#define VC3_MPAR_BURST_LENGTH 8 /* For 8-bit IF we must run burst-8 */
+#endif
+#define VC3_MPAR_BURST_SIZE 0 /* Always 0 for DDR2 */
+#endif
+
+#define VC3_MPAR_RL VC3_MPAR_CL
+#if !defined(MIPS_VCOREIII_MEMORY_DDR3)
+#define VC3_MPAR_WL (VC3_MPAR_RL - 1)
+#define VC3_MPAR_MD VC3_MPAR_tMRD
+#define VC3_MPAR_ID VC3_MPAR__400_ns_dly
+#define VC3_MPAR_SD VC3_MPAR_tXSRD
+#define VC3_MPAR_OW (VC3_MPAR_WL - 2)
+#define VC3_MPAR_OR (VC3_MPAR_WL - 3)
+#define VC3_MPAR_RP (VC3_MPAR_bank_addr_cnt < 3 ? VC3_MPAR_tRP : VC3_MPAR_tRPA)
+#define VC3_MPAR_FAW (VC3_MPAR_bank_addr_cnt < 3 ? 1 : VC3_MPAR_tFAW)
+#define VC3_MPAR_BL (VC3_MPAR_BURST_LENGTH == 4 ? 2 : 4)
+#define MSCC_MEMPARM_MR0 \
+ (VC3_MPAR_BURST_LENGTH == 8 ? 3 : 2) | (VC3_MPAR_CL << 4) | \
+ ((VC3_MPAR_tWR - 1) << 9)
+/* DLL-on, Full-OD, AL=0, RTT=off, nDQS-on, RDQS-off, out-en */
+#define MSCC_MEMPARM_MR1 0x382
+#define MSCC_MEMPARM_MR2 0
+#define MSCC_MEMPARM_MR3 0
+#else
+#define VC3_MPAR_WL VC3_MPAR_CWL
+#define VC3_MPAR_MD VC3_MPAR_tMOD
+#define VC3_MPAR_ID VC3_MPAR_tXPR
+#define VC3_MPAR_SD VC3_MPAR_tDLLK
+#define VC3_MPAR_OW 2
+#define VC3_MPAR_OR 2
+#define VC3_MPAR_RP VC3_MPAR_tRP
+#define VC3_MPAR_FAW VC3_MPAR_tFAW
+#define VC3_MPAR_BL 4
+#define MSCC_MEMPARM_MR0 ((VC3_MPAR_RL - 4) << 4) | ((VC3_MPAR_tWR - 4) << 9)
+/* ODT_RTT: “0x0040” for 120ohm, and “0x0004” for 60ohm. */
+#define MSCC_MEMPARM_MR1 0x0040
+#define MSCC_MEMPARM_MR2 ((VC3_MPAR_WL - 5) << 3)
+#define MSCC_MEMPARM_MR3 0
+#endif /* MIPS_VCOREIII_MEMORY_DDR3 */
+
+#define MSCC_MEMPARM_MEMCFG \
+ ((MIPS_VCOREIII_DDR_SIZE > SZ_512M) ? \
+ ICPU_MEMCTRL_CFG_DDR_512MBYTE_PLUS : 0) | \
+ (VC3_MPAR_16BIT ? ICPU_MEMCTRL_CFG_DDR_WIDTH : 0) | \
+ (VC3_MPAR_DDR3_MODE ? ICPU_MEMCTRL_CFG_DDR_MODE : 0) | \
+ (VC3_MPAR_BURST_SIZE ? ICPU_MEMCTRL_CFG_BURST_SIZE : 0) | \
+ (VC3_MPAR_BURST_LENGTH == 8 ? ICPU_MEMCTRL_CFG_BURST_LEN : 0) | \
+ (VC3_MPAR_bank_addr_cnt == 3 ? ICPU_MEMCTRL_CFG_BANK_CNT : 0) | \
+ ICPU_MEMCTRL_CFG_MSB_ROW_ADDR(VC3_MPAR_row_addr_cnt - 1) | \
+ ICPU_MEMCTRL_CFG_MSB_COL_ADDR(VC3_MPAR_col_addr_cnt - 1)
+
+#ifdef CONFIG_SOC_OCELOT
+#define MSCC_MEMPARM_PERIOD \
+ ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(8) | \
+ ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(VC3_MPAR_tREFI)
+
+#define MSCC_MEMPARM_TIMING0 \
+ ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY(VC3_MPAR_RL + VC3_MPAR_BL + 1 - \
+ VC3_MPAR_WL) | \
+ ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY(VC3_MPAR_BL - 1) | \
+ ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY(VC3_MPAR_BL) | \
+ ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(VC3_MPAR_tRAS_min - 1) | \
+ ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(VC3_MPAR_WL + \
+ VC3_MPAR_BL + \
+ VC3_MPAR_tWR - 1) | \
+ ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(VC3_MPAR_BL - 1) | \
+ ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(VC3_MPAR_WL - 1) | \
+ ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(VC3_MPAR_RL - 3)
+
+#define MSCC_MEMPARM_TIMING1 \
+ ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(VC3_MPAR_tRC - 1) | \
+ ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(VC3_MPAR_FAW - 1) | \
+ ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(VC3_MPAR_RP - 1) | \
+ ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(VC3_MPAR_tRRD - 1) | \
+ ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(VC3_MPAR_tRCD - 1) | \
+ ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(VC3_MPAR_WL + \
+ VC3_MPAR_BL + \
+ VC3_MPAR_tWTR - 1)
+
+#define MSCC_MEMPARM_TIMING2 \
+ ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(VC3_MPAR_RP - 1) | \
+ ICPU_MEMCTRL_TIMING2_MDSET_DLY(VC3_MPAR_MD - 1) | \
+ ICPU_MEMCTRL_TIMING2_REF_DLY(VC3_MPAR_tRFC - 1) | \
+ ICPU_MEMCTRL_TIMING2_INIT_DLY(VC3_MPAR_ID - 1)
+
+#define MSCC_MEMPARM_TIMING3 \
+ ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(VC3_MPAR_WL + \
+ VC3_MPAR_tWTR - 1) |\
+ ICPU_MEMCTRL_TIMING3_ODT_RD_DLY(VC3_MPAR_OR - 1) | \
+ ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(VC3_MPAR_OW - 1) | \
+ ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(VC3_MPAR_RL - 3)
+
+#else
+#define MSCC_MEMPARM_PERIOD \
+ ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(1) | \
+ ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(VC3_MPAR_tREFI)
+
+#define MSCC_MEMPARM_TIMING0 \
+ ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(VC3_MPAR_tRAS_min - 1) | \
+ ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(VC3_MPAR_CL + \
+ (VC3_MPAR_BURST_LENGTH == 8 ? 2 : 0) + \
+ VC3_MPAR_tWR) | \
+ ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(VC3_MPAR_BURST_LENGTH == 8 ? 3 : 1) | \
+ ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(VC3_MPAR_CL - 3) | \
+ ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(VC3_MPAR_CL - 3)
+
+#define MSCC_MEMPARM_TIMING1 \
+ ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(VC3_MPAR_tRC - 1) | \
+ ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(VC3_MPAR_tFAW - 1) | \
+ ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(VC3_MPAR_tRP - 1) | \
+ ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(VC3_MPAR_tRRD - 1) | \
+ ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(VC3_MPAR_tRCD - 1) | \
+ ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(VC3_MPAR_CL + \
+ (VC3_MPAR_BURST_LENGTH == 8 ? 2 : 0) + \
+ VC3_MPAR_tWTR)
+#define MSCC_MEMPARM_TIMING2 \
+ ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(VC3_MPAR_tRPA - 1) | \
+ ICPU_MEMCTRL_TIMING2_MDSET_DLY(VC3_MPAR_tMRD - 1) | \
+ ICPU_MEMCTRL_TIMING2_REF_DLY(VC3_MPAR_tRFC - 1) | \
+ ICPU_MEMCTRL_TIMING2_FOUR_HUNDRED_NS_DLY(VC3_MPAR__400_ns_dly)
+
+#define MSCC_MEMPARM_TIMING3 \
+ ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(VC3_MPAR_CL - 1) | \
+ ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(VC3_MPAR_CL - 1) | \
+ ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(VC3_MPAR_CL - 1)
+
+#endif
+
+enum {
+ DDR_TRAIN_OK,
+ DDR_TRAIN_CONTINUE,
+ DDR_TRAIN_ERROR,
+};
+
+/*
+ * We actually have very few 'pause' possibilities apart from
+ * these assembly nops (at this very early stage).
+ */
+#define PAUSE() asm volatile("nop; nop; nop; nop; nop; nop; nop; nop")
+
+/* NB: Assumes inlining as no stack is available! */
+static inline void set_dly(u32 bytelane, u32 dly)
+{
+ register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+
+ r &= ~ICPU_MEMCTRL_DQS_DLY_DQS_DLY_M;
+ r |= ICPU_MEMCTRL_DQS_DLY_DQS_DLY(dly);
+ writel(r, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+}
+
+static inline bool incr_dly(u32 bytelane)
+{
+ register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+
+ if (ICPU_MEMCTRL_DQS_DLY_DQS_DLY(r) < 31) {
+ writel(r + 1, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+ return true;
+ }
+
+ return false;
+}
+
+static inline bool adjust_dly(int adjust)
+{
+ register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(0));
+
+ if (ICPU_MEMCTRL_DQS_DLY_DQS_DLY(r) < 31) {
+ writel(r + adjust, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(0));
+ return true;
+ }
+
+ return false;
+}
+
+/* NB: Assumes inlining as no stack is available! */
+static inline void center_dly(u32 bytelane, u32 start)
+{
+ register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)) - start;
+
+ writel(start + (r >> 1), BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+}
+
+static inline void memphy_soft_reset(void)
+{
+ setbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_FIFO_RST);
+ PAUSE();
+ clrbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_FIFO_RST);
+ PAUSE();
+}
+
+#ifdef CONFIG_SOC_OCELOT
+static u8 training_data[] = { 0xfe, 0x11, 0x33, 0x55, 0x77, 0x99, 0xbb, 0xdd };
+
+static inline void sleep_100ns(u32 val)
+{
+ /* Set the timer tick generator to 100 ns */
+ writel(VCOREIII_TIMER_DIVIDER - 1, BASE_CFG + ICPU_TIMER_TICK_DIV);
+
+ /* Set the timer value */
+ writel(val, BASE_CFG + ICPU_TIMER_VALUE(0));
+
+ /* Enable timer 0 for one-shot */
+ writel(ICPU_TIMER_CTRL_ONE_SHOT_ENA | ICPU_TIMER_CTRL_TIMER_ENA,
+ BASE_CFG + ICPU_TIMER_CTRL(0));
+
+ /* Wait for timer 0 to reach 0 */
+ while (readl(BASE_CFG + ICPU_TIMER_VALUE(0)) != 0)
+ ;
+}
+
+static inline void hal_vcoreiii_ddr_reset_assert(void)
+{
+ /* DDR has reset pin on GPIO 19 toggle Low-High to release */
+ setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+ writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_CLR);
+ sleep_100ns(10000);
+}
+
+static inline void hal_vcoreiii_ddr_reset_release(void)
+{
+ /* DDR has reset pin on GPIO 19 toggle Low-High to release */
+ setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+ writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_SET);
+ sleep_100ns(10000);
+}
+
+/*
+ * DDR memory sanity checking failed, tally and do hard reset
+ *
+ * NB: Assumes inlining as no stack is available!
+ */
+static inline void hal_vcoreiii_ddr_failed(void)
+{
+ register u32 reset;
+
+ writel(readl(BASE_CFG + ICPU_GPR(6)) + 1, BASE_CFG + ICPU_GPR(6));
+
+ clrbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+
+ /* We have to execute the reset function from cache. Indeed,
+ * the reboot workaround in _machine_restart() will change the
+ * SPI NOR into SW bitbang.
+ *
+ * This will render the CPU unable to execute directly from
+ * the NOR, which is why the reset instructions are prefetched
+ * into the I-cache.
+ *
+ * When failing the DDR initialization we are executing from
+ * NOR.
+ *
+ * The last instruction in _machine_restart() will reset the
+ * MIPS CPU (and the cache), and the CPU will start executing
+ * from the reset vector.
+ */
+ reset = KSEG0ADDR(_machine_restart);
+ icache_lock((void *)reset, 128);
+ asm volatile ("jr %0"::"r" (reset));
+
+ panic("DDR init failed\n");
+}
+
+/*
+ * DDR memory sanity checking done, possibly enable ECC.
+ *
+ * NB: Assumes inlining as no stack is available!
+ */
+static inline void hal_vcoreiii_ddr_verified(void)
+{
+#ifdef MIPS_VCOREIII_MEMORY_ECC
+ /* Finally, enable ECC */
+ register u32 val = readl(BASE_CFG + ICPU_MEMCTRL_CFG);
+
+ val |= ICPU_MEMCTRL_CFG_DDR_ECC_ERR_ENA;
+ val &= ~ICPU_MEMCTRL_CFG_BURST_SIZE;
+
+ writel(val, BASE_CFG + ICPU_MEMCTRL_CFG);
+#endif
+
+ /* Reset Status register - sticky bits */
+ writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT), BASE_CFG + ICPU_MEMCTRL_STAT);
+}
+
+/* NB: Assumes inlining as no stack is available! */
+static inline int look_for(u32 bytelane)
+{
+ register u32 i;
+
+ /* Reset FIFO in case any previous access failed */
+ for (i = 0; i < sizeof(training_data); i++) {
+ register u32 byte;
+
+ memphy_soft_reset();
+ /* Reset sticky bits */
+ writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT),
+ BASE_CFG + ICPU_MEMCTRL_STAT);
+ /* Read data */
+ byte = __raw_readb((void __iomem *)MSCC_DDR_TO + bytelane +
+ (i * 4));
+
+ /*
+ * Prevent the compiler reordering the instruction so
+ * the read of RAM happens after the check of the
+ * errors.
+ */
+ rmb();
+ if (readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
+ (ICPU_MEMCTRL_STAT_RDATA_MASKED |
+ ICPU_MEMCTRL_STAT_RDATA_DUMMY)) {
+ /* Noise on the line */
+ goto read_error;
+ }
+ /* If mismatch, increment DQS - if possible */
+ if (byte != training_data[i]) {
+ read_error:
+ if (!incr_dly(bytelane))
+ return DDR_TRAIN_ERROR;
+ return DDR_TRAIN_CONTINUE;
+ }
+ }
+ return DDR_TRAIN_OK;
+}
+
+/* NB: Assumes inlining as no stack is available! */
+static inline int look_past(u32 bytelane)
+{
+ register u32 i;
+
+ /* Reset FIFO in case any previous access failed */
+ for (i = 0; i < sizeof(training_data); i++) {
+ register u32 byte;
+
+ memphy_soft_reset();
+ /* Ack sticky bits */
+ writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT),
+ BASE_CFG + ICPU_MEMCTRL_STAT);
+ byte = __raw_readb((void __iomem *)MSCC_DDR_TO + bytelane +
+ (i * 4));
+ /*
+ * Prevent the compiler reordering the instruction so
+ * the read of RAM happens after the check of the
+ * errors.
+ */
+ rmb();
+ if (readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
+ (ICPU_MEMCTRL_STAT_RDATA_MASKED |
+ ICPU_MEMCTRL_STAT_RDATA_DUMMY)) {
+ /* Noise on the line */
+ goto read_error;
+ }
+ /* Bail out when we see first mismatch */
+ if (byte != training_data[i]) {
+ read_error:
+ return DDR_TRAIN_OK;
+ }
+ }
+ /* All data compares OK, increase DQS and retry */
+ if (!incr_dly(bytelane))
+ return DDR_TRAIN_ERROR;
+
+ return DDR_TRAIN_CONTINUE;
+}
+
+static inline int hal_vcoreiii_train_bytelane(u32 bytelane)
+{
+ register int res;
+ register u32 dqs_s;
+
+ set_dly(bytelane, 0); /* Start training at DQS=0 */
+ while ((res = look_for(bytelane)) == DDR_TRAIN_CONTINUE)
+ ;
+ if (res != DDR_TRAIN_OK)
+ return res;
+
+ dqs_s = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+ while ((res = look_past(bytelane)) == DDR_TRAIN_CONTINUE)
+ ;
+ if (res != DDR_TRAIN_OK)
+ return res;
+ /* Reset FIFO - for good measure */
+ memphy_soft_reset();
+ /* Adjust to center [dqs_s;cur] */
+ center_dly(bytelane, dqs_s);
+ return DDR_TRAIN_OK;
+}
+
+/* This algorithm is converted from the TCL training algorithm used
+ * during silicon simulation.
+ * NB: Assumes inlining as no stack is available!
+ */
+static inline int hal_vcoreiii_init_dqs(void)
+{
+#define MAX_DQS 32
+ register u32 i, j;
+
+ for (i = 0; i < MAX_DQS; i++) {
+ set_dly(0, i); /* Byte-lane 0 */
+ for (j = 0; j < MAX_DQS; j++) {
+ __maybe_unused register u32 byte;
+
+ set_dly(1, j); /* Byte-lane 1 */
+ /* Reset FIFO in case any previous access failed */
+ memphy_soft_reset();
+ writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT),
+ BASE_CFG + ICPU_MEMCTRL_STAT);
+ byte = __raw_readb((void __iomem *)MSCC_DDR_TO);
+ byte = __raw_readb((void __iomem *)(MSCC_DDR_TO + 1));
+ if (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
+ (ICPU_MEMCTRL_STAT_RDATA_MASKED |
+ ICPU_MEMCTRL_STAT_RDATA_DUMMY)))
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static inline int dram_check(void)
+{
+ register u32 i;
+
+ for (i = 0; i < 8; i++) {
+ __raw_writel(~i, (void __iomem *)(MSCC_DDR_TO + (i * 4)));
+ if (__raw_readl((void __iomem *)(MSCC_DDR_TO + (i * 4))) != ~i)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * NB: Called *early* to init memory controller - assumes inlining as
+ * no stack is available!
+ */
+static inline void hal_vcoreiii_init_memctl(void)
+{
+ /* Ensure DDR is in reset */
+ hal_vcoreiii_ddr_reset_assert();
+
+ /* Wait maybe not needed, but ... */
+ PAUSE();
+
+ /* Drop sys ctl memory controller forced reset */
+ clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_MEM_RST_FORCE);
+
+ PAUSE();
+
+ /* Drop Reset, enable SSTL */
+ writel(ICPU_MEMPHY_CFG_PHY_SSTL_ENA, BASE_CFG + ICPU_MEMPHY_CFG);
+ PAUSE();
+
+ /* Start the automatic SSTL output and ODT drive-strength calibration */
+ writel(ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT(MIPS_VCOREIII_MEMORY_SSTL_ODT) |
+ /* drive strength */
+ ICPU_MEMPHY_ZCAL_ZCAL_PROG(MIPS_VCOREIII_MEMORY_SSTL_DRIVE) |
+ /* Start calibration process */
+ ICPU_MEMPHY_ZCAL_ZCAL_ENA, BASE_CFG + ICPU_MEMPHY_ZCAL);
+
+ /* Wait for ZCAL to clear */
+ while (readl(BASE_CFG + ICPU_MEMPHY_ZCAL) & ICPU_MEMPHY_ZCAL_ZCAL_ENA)
+ ;
+
+ /* Check no ZCAL_ERR */
+ if (readl(BASE_CFG + ICPU_MEMPHY_ZCAL_STAT)
+ & ICPU_MEMPHY_ZCAL_STAT_ZCAL_ERR)
+ hal_vcoreiii_ddr_failed();
+
+ /* Drive CL, CK, ODT */
+ setbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_ODT_OE |
+ ICPU_MEMPHY_CFG_PHY_CK_OE | ICPU_MEMPHY_CFG_PHY_CL_OE);
+
+ /* Initialize memory controller */
+ writel(MSCC_MEMPARM_MEMCFG, BASE_CFG + ICPU_MEMCTRL_CFG);
+ writel(MSCC_MEMPARM_PERIOD, BASE_CFG + ICPU_MEMCTRL_REF_PERIOD);
+
+ writel(MSCC_MEMPARM_TIMING0, BASE_CFG + ICPU_MEMCTRL_TIMING0);
+
+ writel(MSCC_MEMPARM_TIMING1, BASE_CFG + ICPU_MEMCTRL_TIMING1);
+ writel(MSCC_MEMPARM_TIMING2, BASE_CFG + ICPU_MEMCTRL_TIMING2);
+ writel(MSCC_MEMPARM_TIMING3, BASE_CFG + ICPU_MEMCTRL_TIMING3);
+ writel(MSCC_MEMPARM_MR0, BASE_CFG + ICPU_MEMCTRL_MR0_VAL);
+ writel(MSCC_MEMPARM_MR1, BASE_CFG + ICPU_MEMCTRL_MR1_VAL);
+ writel(MSCC_MEMPARM_MR2, BASE_CFG + ICPU_MEMCTRL_MR2_VAL);
+ writel(MSCC_MEMPARM_MR3, BASE_CFG + ICPU_MEMCTRL_MR3_VAL);
+
+ /* Termination setup - enable ODT */
+ writel(ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_ENA |
+ /* Assert ODT0 for any write */
+ ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA(3),
+ BASE_CFG + ICPU_MEMCTRL_TERMRES_CTRL);
+
+ /* Release Reset from DDR */
+ hal_vcoreiii_ddr_reset_release();
+
+ writel(readl(BASE_CFG + ICPU_GPR(7)) + 1, BASE_CFG + ICPU_GPR(7));
+}
+
+static inline void hal_vcoreiii_wait_memctl(void)
+{
+ /* Now, rip it! */
+ writel(ICPU_MEMCTRL_CTRL_INITIALIZE, BASE_CFG + ICPU_MEMCTRL_CTRL);
+
+ while (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT)
+ & ICPU_MEMCTRL_STAT_INIT_DONE))
+ ;
+
+ /* Settle...? */
+ sleep_100ns(10000);
+
+ /* Establish data contents in DDR RAM for training */
+
+ __raw_writel(0xcacafefe, ((void __iomem *)MSCC_DDR_TO));
+ __raw_writel(0x22221111, ((void __iomem *)MSCC_DDR_TO + 0x4));
+ __raw_writel(0x44443333, ((void __iomem *)MSCC_DDR_TO + 0x8));
+ __raw_writel(0x66665555, ((void __iomem *)MSCC_DDR_TO + 0xC));
+ __raw_writel(0x88887777, ((void __iomem *)MSCC_DDR_TO + 0x10));
+ __raw_writel(0xaaaa9999, ((void __iomem *)MSCC_DDR_TO + 0x14));
+ __raw_writel(0xccccbbbb, ((void __iomem *)MSCC_DDR_TO + 0x18));
+ __raw_writel(0xeeeedddd, ((void __iomem *)MSCC_DDR_TO + 0x1C));
+}
+#endif /* __ASM_MACH_DDR_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Microsemi Ocelot Switch driver
+ *
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _MSCC_OCELOT_H_
+#define _MSCC_OCELOT_H_
+
+#include <linux/bitops.h>
+#include <dm.h>
+
+/*
+ * Target offset base(s)
+ */
+#define MSCC_IO_ORIGIN1_OFFSET 0x70000000
+#define MSCC_IO_ORIGIN1_SIZE 0x00200000
+#define MSCC_IO_ORIGIN2_OFFSET 0x71000000
+#define MSCC_IO_ORIGIN2_SIZE 0x01000000
+#define BASE_CFG ((void __iomem *)0x70000000)
+#define BASE_DEVCPU_GCB ((void __iomem *)0x71070000)
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _MSCC_OCELOT_DEVCPU_GCB_H_
+#define _MSCC_OCELOT_DEVCPU_GCB_H_
+
+#define PERF_SOFT_RST 0x8
+
+#define PERF_SOFT_RST_SOFT_NON_CFG_RST BIT(2)
+#define PERF_SOFT_RST_SOFT_SWC_RST BIT(1)
+#define PERF_SOFT_RST_SOFT_CHIP_RST BIT(0)
+
+#define PERF_GPIO_OUT_SET 0x34
+
+#define PERF_GPIO_OUT_CLR 0x38
+
+#define PERF_GPIO_OE 0x44
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _MSCC_OCELOT_ICPU_CFG_H_
+#define _MSCC_OCELOT_ICPU_CFG_H_
+
+#define ICPU_GPR(x) (0x4 * (x))
+#define ICPU_GPR_RSZ 0x4
+
+#define ICPU_RESET 0x20
+
+#define ICPU_RESET_CORE_RST_CPU_ONLY BIT(3)
+#define ICPU_RESET_CORE_RST_PROTECT BIT(2)
+#define ICPU_RESET_CORE_RST_FORCE BIT(1)
+#define ICPU_RESET_MEM_RST_FORCE BIT(0)
+
+#define ICPU_GENERAL_CTRL 0x24
+
+#define ICPU_GENERAL_CTRL_CPU_BUSIF_SLEEP_DIS BIT(14)
+#define ICPU_GENERAL_CTRL_CPU_BUSIF_WERR_ENA BIT(13)
+#define ICPU_GENERAL_CTRL_CPU_8051_IROM_ENA BIT(12)
+#define ICPU_GENERAL_CTRL_CPU_MIPS_DIS BIT(11)
+#define ICPU_GENERAL_CTRL_IF_MIIM_SLV_ADDR_SEL BIT(10)
+#define ICPU_GENERAL_CTRL_IF_MIIM_SLV_ENA BIT(9)
+#define ICPU_GENERAL_CTRL_IF_PI_SLV_DONEPOL BIT(8)
+#define ICPU_GENERAL_CTRL_IF_PI_MST_ENA BIT(7)
+#define ICPU_GENERAL_CTRL_IF_PI_SLV_ENA BIT(6)
+#define ICPU_GENERAL_CTRL_IF_SI_OWNER(x) (((x) << 4) & GENMASK(5, 4))
+#define ICPU_GENERAL_CTRL_IF_SI_OWNER_M GENMASK(5, 4)
+#define ICPU_GENERAL_CTRL_IF_SI_OWNER_X(x) (((x) & GENMASK(5, 4)) >> 4)
+#define ICPU_GENERAL_CTRL_SSI_MST_CONTENTION BIT(3)
+#define ICPU_GENERAL_CTRL_CPU_BE_ENA BIT(2)
+#define ICPU_GENERAL_CTRL_CPU_DIS BIT(1)
+#define ICPU_GENERAL_CTRL_BOOT_MODE_ENA BIT(0)
+#define ICPU_SPI_MST_CFG 0x3c
+
+#define ICPU_SPI_MST_CFG_A32B_ENA BIT(11)
+#define ICPU_SPI_MST_CFG_FAST_READ_ENA BIT(10)
+#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME(x) (((x) << 5) & GENMASK(9, 5))
+#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME_M GENMASK(9, 5)
+#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME_X(x) (((x) & GENMASK(9, 5)) >> 5)
+#define ICPU_SPI_MST_CFG_CLK_DIV(x) ((x) & GENMASK(4, 0))
+#define ICPU_SPI_MST_CFG_CLK_DIV_M GENMASK(4, 0)
+
+#define ICPU_SW_MODE 0x50
+
+#define ICPU_SW_MODE_SW_PIN_CTRL_MODE BIT(13)
+#define ICPU_SW_MODE_SW_SPI_SCK BIT(12)
+#define ICPU_SW_MODE_SW_SPI_SCK_OE BIT(11)
+#define ICPU_SW_MODE_SW_SPI_SDO BIT(10)
+#define ICPU_SW_MODE_SW_SPI_SDO_OE BIT(9)
+#define ICPU_SW_MODE_SW_SPI_CS(x) (((x) << 5) & GENMASK(8, 5))
+#define ICPU_SW_MODE_SW_SPI_CS_M GENMASK(8, 5)
+#define ICPU_SW_MODE_SW_SPI_CS_X(x) (((x) & GENMASK(8, 5)) >> 5)
+#define ICPU_SW_MODE_SW_SPI_CS_OE(x) (((x) << 1) & GENMASK(4, 1))
+#define ICPU_SW_MODE_SW_SPI_CS_OE_M GENMASK(4, 1)
+#define ICPU_SW_MODE_SW_SPI_CS_OE_X(x) (((x) & GENMASK(4, 1)) >> 1)
+#define ICPU_SW_MODE_SW_SPI_SDI BIT(0)
+
+#define ICPU_INTR_ENA 0x88
+
+#define ICPU_DST_INTR_MAP(x) (0x98 + 0x4 * (x))
+#define ICPU_DST_INTR_MAP_RSZ 0x4
+
+#define ICPU_DST_INTR_IDENT 0xa8
+#define ICPU_DST_INTR_IDENT_RSZ 0x4
+
+#define ICPU_TIMER_TICK_DIV 0xe8
+#define ICPU_TIMER_VALUE(x) (0xec + 0x4 * (x))
+
+#define ICPU_TIMER_CTRL(x) (0x104 + 0x4 * (x))
+#define ICPU_TIMER_CTRL_MAX_FREQ_ENA BIT(3)
+#define ICPU_TIMER_CTRL_ONE_SHOT_ENA BIT(2)
+#define ICPU_TIMER_CTRL_TIMER_ENA BIT(1)
+#define ICPU_TIMER_CTRL_FORCE_RELOAD BIT(0)
+
+#define ICPU_MEMCTRL_CTRL 0x110
+#define ICPU_MEMCTRL_CTRL_PWR_DOWN BIT(3)
+#define ICPU_MEMCTRL_CTRL_MDSET BIT(2)
+#define ICPU_MEMCTRL_CTRL_STALL_REF_ENA BIT(1)
+#define ICPU_MEMCTRL_CTRL_INITIALIZE BIT(0)
+
+#define ICPU_MEMCTRL_CFG 0x114
+
+#define ICPU_MEMCTRL_CFG_DDR_512MBYTE_PLUS BIT(16)
+#define ICPU_MEMCTRL_CFG_DDR_ECC_ERR_ENA BIT(15)
+#define ICPU_MEMCTRL_CFG_DDR_ECC_COR_ENA BIT(14)
+#define ICPU_MEMCTRL_CFG_DDR_ECC_ENA BIT(13)
+#define ICPU_MEMCTRL_CFG_DDR_WIDTH BIT(12)
+#define ICPU_MEMCTRL_CFG_DDR_MODE BIT(11)
+#define ICPU_MEMCTRL_CFG_BURST_SIZE BIT(10)
+#define ICPU_MEMCTRL_CFG_BURST_LEN BIT(9)
+#define ICPU_MEMCTRL_CFG_BANK_CNT BIT(8)
+#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR(x) (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR_M GENMASK(7, 4)
+#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR_X(x) (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_CFG_MSB_COL_ADDR(x) ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_CFG_MSB_COL_ADDR_M GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_STAT 0x118
+
+#define ICPU_MEMCTRL_STAT_RDATA_MASKED BIT(5)
+#define ICPU_MEMCTRL_STAT_RDATA_DUMMY BIT(4)
+#define ICPU_MEMCTRL_STAT_RDATA_ECC_ERR BIT(3)
+#define ICPU_MEMCTRL_STAT_RDATA_ECC_COR BIT(2)
+#define ICPU_MEMCTRL_STAT_PWR_DOWN_ACK BIT(1)
+#define ICPU_MEMCTRL_STAT_INIT_DONE BIT(0)
+
+#define ICPU_MEMCTRL_REF_PERIOD 0x11c
+
+#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(x) (((x) << 16) & GENMASK(19, 16))
+#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF_M GENMASK(19, 16)
+#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF_X(x) (((x) & GENMASK(19, 16)) >> 16)
+#define ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(x) ((x) & GENMASK(15, 0))
+#define ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD_M GENMASK(15, 0)
+
+#define ICPU_MEMCTRL_TIMING0 0x124
+
+#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY(x) (((x) << 28) & GENMASK(31, 28))
+#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY_M GENMASK(31, 28)
+#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY_X(x) (((x) & GENMASK(31, 28)) >> 28)
+#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY(x) (((x) << 24) & GENMASK(27, 24))
+#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY_M GENMASK(27, 24)
+#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY_X(x) (((x) & GENMASK(27, 24)) >> 24)
+#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY(x) (((x) << 20) & GENMASK(23, 20))
+#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY_M GENMASK(23, 20)
+#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY_X(x) (((x) & GENMASK(23, 20)) >> 20)
+#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(x) (((x) << 16) & GENMASK(19, 16))
+#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY_M GENMASK(19, 16)
+#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY_X(x) (((x) & GENMASK(19, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(x) (((x) << 12) & GENMASK(15, 12))
+#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY_M GENMASK(15, 12)
+#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY_X(x) (((x) & GENMASK(15, 12)) >> 12)
+#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(x) (((x) << 8) & GENMASK(11, 8))
+#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY_M GENMASK(11, 8)
+#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY_X(x) (((x) & GENMASK(11, 8)) >> 8)
+#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(x) (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY_M GENMASK(7, 4)
+#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY_X(x) (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(x) ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY_M GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_TIMING1 0x128
+
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(x) (((x) << 24) & GENMASK(31, 24))
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY_M GENMASK(31, 24)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY_X(x) (((x) & GENMASK(31, 24)) >> 24)
+#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(x) (((x) << 16) & GENMASK(23, 16))
+#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY_M GENMASK(23, 16)
+#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY_X(x) (((x) & GENMASK(23, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(x) (((x) << 12) & GENMASK(15, 12))
+#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY_M GENMASK(15, 12)
+#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY_X(x) (((x) & GENMASK(15, 12)) >> 12)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(x) (((x) << 8) & GENMASK(11, 8))
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY_M GENMASK(11, 8)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY_X(x) (((x) & GENMASK(11, 8)) >> 8)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(x) (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY_M GENMASK(7, 4)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY_X(x) (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(x) ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY_M GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_TIMING2 0x12c
+
+#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(x) (((x) << 28) & GENMASK(31, 28))
+#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY_M GENMASK(31, 28)
+#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY_X(x) (((x) & GENMASK(31, 28)) >> 28)
+#define ICPU_MEMCTRL_TIMING2_MDSET_DLY(x) (((x) << 24) & GENMASK(27, 24))
+#define ICPU_MEMCTRL_TIMING2_MDSET_DLY_M GENMASK(27, 24)
+#define ICPU_MEMCTRL_TIMING2_MDSET_DLY_X(x) (((x) & GENMASK(27, 24)) >> 24)
+#define ICPU_MEMCTRL_TIMING2_REF_DLY(x) (((x) << 16) & GENMASK(23, 16))
+#define ICPU_MEMCTRL_TIMING2_REF_DLY_M GENMASK(23, 16)
+#define ICPU_MEMCTRL_TIMING2_REF_DLY_X(x) (((x) & GENMASK(23, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING2_INIT_DLY(x) ((x) & GENMASK(15, 0))
+#define ICPU_MEMCTRL_TIMING2_INIT_DLY_M GENMASK(15, 0)
+
+#define ICPU_MEMCTRL_TIMING3 0x130
+
+#define ICPU_MEMCTRL_TIMING3_RMW_DLY(x) (((x) << 16) & GENMASK(19, 16))
+#define ICPU_MEMCTRL_TIMING3_RMW_DLY_M GENMASK(19, 16)
+#define ICPU_MEMCTRL_TIMING3_RMW_DLY_X(x) (((x) & GENMASK(19, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY(x) (((x) << 12) & GENMASK(15, 12))
+#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY_M GENMASK(15, 12)
+#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY_X(x) (((x) & GENMASK(15, 12)) >> 12)
+#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(x) (((x) << 8) & GENMASK(11, 8))
+#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY_M GENMASK(11, 8)
+#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY_X(x) (((x) & GENMASK(11, 8)) >> 8)
+#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(x) (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY_M GENMASK(7, 4)
+#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY_X(x) (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(x) ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY_M GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_MR0_VAL 0x138
+
+#define ICPU_MEMCTRL_MR1_VAL 0x13c
+
+#define ICPU_MEMCTRL_MR2_VAL 0x140
+
+#define ICPU_MEMCTRL_MR3_VAL 0x144
+
+#define ICPU_MEMCTRL_TERMRES_CTRL 0x148
+
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_EXT BIT(11)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA(x) (((x) << 7) & GENMASK(10, 7))
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA_M GENMASK(10, 7)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA_X(x) (((x) & GENMASK(10, 7)) >> 7)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_EXT BIT(6)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA(x) (((x) << 2) & GENMASK(5, 2))
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA_M GENMASK(5, 2)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA_X(x) (((x) & GENMASK(5, 2)) >> 2)
+#define ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_EXT BIT(1)
+#define ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_ENA BIT(0)
+
+#define ICPU_MEMCTRL_DQS_DLY(x) (0x150 + 0x4 * (x))
+#define ICPU_MEMCTRL_DQS_DLY_RSZ 0x4
+
+#define ICPU_MEMCTRL_DQS_DLY_TRAIN_DQ_ENA BIT(11)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1(x) (((x) << 8) & GENMASK(10, 8))
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1_M GENMASK(10, 8)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1_X(x) (((x) & GENMASK(10, 8)) >> 8)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0(x) (((x) << 5) & GENMASK(7, 5))
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0_M GENMASK(7, 5)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0_X(x) (((x) & GENMASK(7, 5)) >> 5)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY(x) ((x) & GENMASK(4, 0))
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_M GENMASK(4, 0)
+
+#define ICPU_MEMPHY_CFG 0x160
+
+#define ICPU_MEMPHY_CFG_PHY_FLUSH_DIS BIT(10)
+#define ICPU_MEMPHY_CFG_PHY_RD_ADJ_DIS BIT(9)
+#define ICPU_MEMPHY_CFG_PHY_DQS_EXT BIT(8)
+#define ICPU_MEMPHY_CFG_PHY_FIFO_RST BIT(7)
+#define ICPU_MEMPHY_CFG_PHY_DLL_BL_RST BIT(6)
+#define ICPU_MEMPHY_CFG_PHY_DLL_CL_RST BIT(5)
+#define ICPU_MEMPHY_CFG_PHY_ODT_OE BIT(4)
+#define ICPU_MEMPHY_CFG_PHY_CK_OE BIT(3)
+#define ICPU_MEMPHY_CFG_PHY_CL_OE BIT(2)
+#define ICPU_MEMPHY_CFG_PHY_SSTL_ENA BIT(1)
+#define ICPU_MEMPHY_CFG_PHY_RST BIT(0)
+
+#define ICPU_MEMPHY_ZCAL 0x188
+
+#define ICPU_MEMPHY_ZCAL_ZCAL_CLK_SEL BIT(9)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT(x) (((x) << 5) & GENMASK(8, 5))
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT_M GENMASK(8, 5)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT_X(x) (((x) & GENMASK(8, 5)) >> 5)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG(x) (((x) << 1) & GENMASK(4, 1))
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_M GENMASK(4, 1)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_X(x) (((x) & GENMASK(4, 1)) >> 1)
+#define ICPU_MEMPHY_ZCAL_ZCAL_ENA BIT(0)
+
+#define ICPU_MEMPHY_ZCAL_STAT 0x18c
+
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL(x) (((x) << 12) & GENMASK(31, 12))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL_M GENMASK(31, 12)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL_X(x) (((x) & GENMASK(31, 12)) >> 12)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU(x) (((x) << 8) & GENMASK(9, 8))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU_M GENMASK(9, 8)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU_X(x) (((x) & GENMASK(9, 8)) >> 8)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD(x) (((x) << 6) & GENMASK(7, 6))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD_M GENMASK(7, 6)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD_X(x) (((x) & GENMASK(7, 6)) >> 6)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU(x) (((x) << 4) & GENMASK(5, 4))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU_M GENMASK(5, 4)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU_X(x) (((x) & GENMASK(5, 4)) >> 4)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD(x) (((x) << 2) & GENMASK(3, 2))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD_M GENMASK(3, 2)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD_X(x) (((x) & GENMASK(3, 2)) >> 2)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ERR BIT(1)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_DONE BIT(0)
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_TLB_H
+#define __ASM_MACH_TLB_H
+
+#include <asm/mipsregs.h>
+#include <mach/common.h>
+#include <linux/sizes.h>
+
+#define TLB_HI_MASK 0xffffe000
+#define TLB_LO_MASK 0x3fffffff /* Masks off Fill bits */
+#define TLB_LO_SHIFT 6 /* PFN Start bit */
+
+#define PAGEMASK_SHIFT 13
+
+#define MMU_PAGE_CACHED (3 << 3) /* C(5:3) Cache Coherency Attributes */
+#define MMU_PAGE_UNCACHED (2 << 3) /* C(5:3) Cache Coherency Attributes */
+#define MMU_PAGE_DIRTY BIT(2) /* = Writeable */
+#define MMU_PAGE_VALID BIT(1)
+#define MMU_PAGE_GLOBAL BIT(0)
+#define MMU_REGIO_RO_C (MMU_PAGE_CACHED | MMU_PAGE_VALID | MMU_PAGE_GLOBAL)
+#define MMU_REGIO_RO (MMU_PAGE_UNCACHED | MMU_PAGE_VALID | MMU_PAGE_GLOBAL)
+#define MMU_REGIO_RW (MMU_PAGE_DIRTY | MMU_REGIO_RO)
+#define MMU_REGIO_INVAL (MMU_PAGE_GLOBAL)
+
+#define TLB_COUNT_MASK GENMASK(5, 0)
+#define TLB_COUNT_OFF 25
+
+static inline u32 get_tlb_count(void)
+{
+ register u32 config1;
+
+ config1 = read_c0_config1();
+ config1 >>= TLB_COUNT_OFF;
+ config1 &= TLB_COUNT_MASK;
+
+ return 1 + config1;
+}
+
+static inline void create_tlb(int index, u32 offset, u32 size, u32 tlb_attrib1,
+ u32 tlb_attrib2)
+{
+ register u32 tlb_mask, tlb_lo0, tlb_lo1;
+
+ tlb_mask = ((size >> 12) - 1) << PAGEMASK_SHIFT;
+ tlb_lo0 = tlb_attrib1 | (offset >> TLB_LO_SHIFT);
+ tlb_lo1 = tlb_attrib2 | ((offset + size) >> TLB_LO_SHIFT);
+
+ write_one_tlb(index, tlb_mask, offset & TLB_HI_MASK,
+ tlb_lo0 & TLB_LO_MASK, tlb_lo1 & TLB_LO_MASK);
+}
+#endif /* __ASM_MACH_TLB_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+ .set noreorder
+ .extern vcoreiii_tlb_init
+
+LEAF(lowlevel_init)
+ /*
+ * As we have no stack yet, we can assume the restricted
+ * luxury of the sX-registers without saving them
+ */
+ move s0,ra
+
+ jal vcoreiii_tlb_init
+ nop
+ jr s0
+ nop
+ END(lowlevel_init)
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+
+#include <asm/reboot.h>
+
+void _machine_restart(void)
+{
+ register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST;
+ (void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST);
+
+ /* Make sure VCore is NOT protected from reset */
+ clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT);
+
+ /* Change to SPI bitbang for SPI reset workaround... */
+ writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) |
+ ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE);
+
+ /* Do the global reset */
+ writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST);
+
+ while (1)
+ ; /* NOP */
+}
projects / u-boot.git / commitdiff