#include <linux/errno.h>
#include <linux/usb/gadget.h>
#include <asm/unaligned.h>
-#include "gadget_chips.h"
#define isdigit(c) ('0' <= (c) && (c) <= '9')
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_net2280(gadget) && type == USB_ENDPOINT_XFER_INT) {
- /* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = find_ep(gadget, "ep-e");
- if (ep && ep_matches(gadget, ep, desc))
- return ep;
- ep = find_ep(gadget, "ep-f");
- if (ep && ep_matches(gadget, ep, desc))
- return ep;
-
- } else if (gadget_is_goku(gadget)) {
- if (USB_ENDPOINT_XFER_INT == type) {
- /* single buffering is enough */
- ep = find_ep(gadget, "ep3-bulk");
- if (ep && ep_matches(gadget, ep, desc))
- return ep;
- } else if (USB_ENDPOINT_XFER_BULK == type
- && (USB_DIR_IN & desc->bEndpointAddress)) {
- /* DMA may be available */
- ep = find_ep(gadget, "ep2-bulk");
- if (ep && ep_matches(gadget, ep, desc))
- return ep;
- }
-
- } else if (gadget_is_sh(gadget) && USB_ENDPOINT_XFER_INT == type) {
- /* single buffering is enough; maybe 8 byte fifo is too */
- ep = find_ep(gadget, "ep3in-bulk");
- if (ep && ep_matches(gadget, ep, desc))
- return ep;
-
- } else if (gadget_is_mq11xx(gadget) && USB_ENDPOINT_XFER_INT == type) {
- ep = find_ep(gadget, "ep1-bulk");
- if (ep && ep_matches(gadget, ep, desc))
- return ep;
-#ifndef CONFIG_SPL_BUILD
- } else if (gadget_is_dwc3(gadget)) {
+ if (!IS_ENABLED(CONFIG_SPL_BUILD) &&
+ IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
+ !strcmp("dwc3-gadget", gadget->name)) {
const char *name = NULL;
/*
* First try standard, common configuration: ep1in-bulk,
ep = find_ep(gadget, name);
if (ep && ep_matches(gadget, ep, desc))
return ep;
-#endif
}
if (gadget->ops->match_ep)
+++ /dev/null
-/*
- * USB device controllers have lots of quirks. Use these macros in
- * gadget drivers or other code that needs to deal with them, and which
- * autoconfigures instead of using early binding to the hardware.
- *
- * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
- * some config file that gets updated as new hardware is supported.
- * (And avoiding all runtime comparisons in typical one-choice configs!)
- *
- * NOTE: some of these controller drivers may not be available yet.
- * Some are available on 2.4 kernels; several are available, but not
- * yet pushed in the 2.6 mainline tree.
- *
- * Ported to U-Boot by: Thomas Smits <ts.smits@gmail.com> and
- * Remy Bohmer <linux@bohmer.net>
- */
-#ifdef CONFIG_USB_GADGET_NET2280
-#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
-#else
-#define gadget_is_net2280(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_AMD5536UDC
-#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name))
-#else
-#define gadget_is_amd5536udc(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_DUMMY_HCD
-#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name))
-#else
-#define gadget_is_dummy(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_GOKU
-#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
-#else
-#define gadget_is_goku(g) 0
-#endif
-
-/* SH3 UDC -- not yet ported 2.4 --> 2.6 */
-#ifdef CONFIG_USB_GADGET_SUPERH
-#define gadget_is_sh(g) (!strcmp("sh_udc", (g)->name))
-#else
-#define gadget_is_sh(g) 0
-#endif
-
-/* handhelds.org tree (?) */
-#ifdef CONFIG_USB_GADGET_MQ11XX
-#define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name))
-#else
-#define gadget_is_mq11xx(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_OMAP
-#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name))
-#else
-#define gadget_is_omap(g) 0
-#endif
-
-/* not yet ported 2.4 --> 2.6 */
-#ifdef CONFIG_USB_GADGET_N9604
-#define gadget_is_n9604(g) (!strcmp("n9604_udc", (g)->name))
-#else
-#define gadget_is_n9604(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name))
-#else
-#define gadget_is_atmel_usba(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_AT91
-#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
-#else
-#define gadget_is_at91(g) 0
-#endif
-
-/* status unclear */
-#ifdef CONFIG_USB_GADGET_IMX
-#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name))
-#else
-#define gadget_is_imx(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_FSL_USB2
-#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name))
-#else
-#define gadget_is_fsl_usb2(g) 0
-#endif
-
-/* Mentor high speed function controller */
-/* from Montavista kernel (?) */
-#ifdef CONFIG_USB_GADGET_MUSBHSFC
-#define gadget_is_musbhsfc(g) (!strcmp("musbhsfc_udc", (g)->name))
-#else
-#define gadget_is_musbhsfc(g) 0
-#endif
-
-/* Mentor high speed "dual role" controller, in peripheral role */
-#ifdef CONFIG_USB_MUSB_GADGET
-#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
-#else
-#define gadget_is_musbhdrc(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_M66592
-#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name))
-#else
-#define gadget_is_m66592(g) 0
-#endif
-
-#ifdef CONFIG_CI_UDC
-#define gadget_is_ci(g) (!strcmp("ci_udc", (g)->name))
-#else
-#define gadget_is_ci(g) 0
-#endif
-
-#ifdef CONFIG_USB_DWC3_GADGET
-#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name))
-#else
-#define gadget_is_dwc3(g) 0
-#endif
-
-#ifdef CONFIG_USB_CDNS3_GADGET
-#define gadget_is_cdns3(g) (!strcmp("cdns3-gadget", (g)->name))
-#else
-#define gadget_is_cdns3(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_MAX3420
-#define gadget_is_max3420(g) (!strcmp("max3420-udc", (g)->name))
-#else
-#define gadget_is_max3420(g) 0
-#endif
-
-#ifdef CONFIG_USB_MTU3_GADGET
-#define gadget_is_mtu3(g) (!strcmp("mtu3-gadget", (g)->name))
-#else
-#define gadget_is_mtu3(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_DWC2_OTG
-#define gadget_is_dwc2(g) (!strcmp("dwc2-udc", (g)->name))
-#else
-#define gadget_is_dwc2(g) 0
-#endif