at91: corvus_defconfig: get rid of build warnings

fix CONFIG_OF_EMBED and add CONFIG_DM_USB
build warnings.

Signed-off-by: Heiko Schocher <hs@denx.de>

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index a1af2f1342f5b590031e016f906946236d128e81..af159ecb4722931d6317e2c19fffd28a657973b4 100644 (file)
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -18,6 +18,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
@@ -34,10 +35,11 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MTDPARTS=y
+CONFIG_DOS_PARTITION=y
 CONFIG_OF_CONTROL=y
-CONFIG_OF_EMBED=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_BLK=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_DFU_NAND=y
@@ -47,8 +49,8 @@ CONFIG_NAND_ATMEL=y
 CONFIG_PHYLIB=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0908

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 749a67d4b0852c2036933259b451fe3148f9fe8c..e85f684e32b02afcb6db10070ed3f113cb9765ba 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -72,6 +72,7 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC8
+#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 #endif
 
 /* Ethernet */