x86: sysreset: Implement power-off if available

On modern x86 devices we can power the system off using the power-
management features of the PCH. Add an implementation for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/drivers/sysreset/sysreset_x86.c b/drivers/sysreset/sysreset_x86.c
index d484ec5de49ca53e8811954dbfe6da48fdd5ea9d..ca892b305e286a96194491920ef416e09ef9247f 100644 (file)
--- a/drivers/sysreset/sysreset_x86.c
+++ b/drivers/sysreset/sysreset_x86.c
@@ -7,14 +7,75 @@
 
 #include <common.h>
 #include <dm.h>
+#include <efi_loader.h>
+#include <pch.h>
 #include <sysreset.h>
+#include <asm/acpi_s3.h>
 #include <asm/io.h>
 #include <asm/processor.h>
-#include <efi_loader.h>
+
+struct x86_sysreset_platdata {
+       struct udevice *pch;
+};
+
+/*
+ * Power down the machine by using the power management sleep control
+ * of the chipset. This will currently only work on Intel chipsets.
+ * However, adapting it to new chipsets is fairly simple. You will
+ * have to find the IO address of the power management register block
+ * in your southbridge, and look up the appropriate SLP_TYP_S5 value
+ * from your southbridge's data sheet.
+ *
+ * This function never returns.
+ */
+int pch_sysreset_power_off(struct udevice *dev)
+{
+       struct x86_sysreset_platdata *plat = dev_get_platdata(dev);
+       struct pch_pmbase_info pm;
+       u32 reg32;
+       int ret;
+
+       if (!plat->pch)
+               return -ENOENT;
+       ret = pch_ioctl(plat->pch, PCH_REQ_PMBASE_INFO, &pm, sizeof(pm));
+       if (ret)
+               return ret;
+
+       /*
+        * Mask interrupts or system might stay in a coma, not executing code
+        * anymore, but not powered off either.
+        */
+       asm("cli");
+
+       /*
+        * Avoid any GPI waking the system from S5* or the system might stay in
+        * a coma
+        */
+       outl(0x00000000, pm.base + pm.gpio0_en_ofs);
+
+       /* Clear Power Button Status */
+       outw(PWRBTN_STS, pm.base + pm.pm1_sts_ofs);
+
+       /* PMBASE + 4, Bit 10-12, Sleeping Type, * set to 111 -> S5, soft_off */
+       reg32 = inl(pm.base + pm.pm1_cnt_ofs);
+
+       /* Set Sleeping Type to S5 (poweroff) */
+       reg32 &= ~(SLP_EN | SLP_TYP);
+       reg32 |= SLP_TYP_S5;
+       outl(reg32, pm.base + pm.pm1_cnt_ofs);
+
+       /* Now set the Sleep Enable bit */
+       reg32 |= SLP_EN;
+       outl(reg32, pm.base + pm.pm1_cnt_ofs);
+
+       for (;;)
+               asm("hlt");
+}
 
 static int x86_sysreset_request(struct udevice *dev, enum sysreset_t type)
 {
        int value;
+       int ret;
 
        switch (type) {
        case SYSRESET_WARM:
@@ -23,6 +84,11 @@ static int x86_sysreset_request(struct udevice *dev, enum sysreset_t type)
        case SYSRESET_COLD:
                value = SYS_RST | RST_CPU | FULL_RST;
                break;
+       case SYSRESET_POWER_OFF:
+               ret = pch_sysreset_power_off(dev);
+               if (ret)
+                       return ret;
+               return -EINPROGRESS;
        default:
                return -ENOSYS;
        }
@@ -57,6 +123,15 @@ void __efi_runtime EFIAPI efi_reset_system(
 }
 #endif
 
+static int x86_sysreset_probe(struct udevice *dev)
+{
+       struct x86_sysreset_platdata *plat = dev_get_platdata(dev);
+
+       /* Locate the PCH if there is one. It isn't essential */
+       uclass_first_device(UCLASS_PCH, &plat->pch);
+
+       return 0;
+}
 
 static const struct udevice_id x86_sysreset_ids[] = {
        { .compatible = "x86,reset" },
@@ -72,4 +147,6 @@ U_BOOT_DRIVER(x86_sysreset) = {
        .id = UCLASS_SYSRESET,
        .of_match = x86_sysreset_ids,
        .ops = &x86_sysreset_ops,
+       .probe = x86_sysreset_probe,
+       .platdata_auto_alloc_size       = sizeof(struct x86_sysreset_platdata),
 };