x86: broadwell: Add a SATA driver

Add a SATA driver for broadwell. This supports connecting an SSD and the
usual U-Boot commands to read and write data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile
index db60e308c73fdd46e2946c720b2234ee0cb8aa7f..d422a1c0767ddc0f7bedaddbbae78314fd9e99c1 100644 (file)
--- a/arch/x86/cpu/broadwell/Makefile
+++ b/arch/x86/cpu/broadwell/Makefile
@@ -8,3 +8,4 @@ obj-y += cpu.o
 obj-y += iobp.o
 obj-y += pch.o
 obj-y += pinctrl_broadwell.o
+obj-y += sata.o

diff --git a/arch/x86/cpu/broadwell/sata.c b/arch/x86/cpu/broadwell/sata.c
new file mode 100644 (file)
index 0000000..dfb8486
--- /dev/null
+++ b/arch/x86/cpu/broadwell/sata.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * From coreboot src/soc/intel/broadwell/sata.c
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/intel_regs.h>
+#include <asm/lpc_common.h>
+#include <asm/pch_common.h>
+#include <asm/pch_common.h>
+#include <asm/arch/pch.h>
+
+struct sata_platdata {
+       int port_map;
+       uint port0_gen3_tx;
+       uint port1_gen3_tx;
+       uint port0_gen3_dtle;
+       uint port1_gen3_dtle;
+
+       /*
+        * SATA DEVSLP Mux
+        * 0 = port 0 DEVSLP on DEVSLP0/GPIO33
+        * 1 = port 3 DEVSLP on DEVSLP0/GPIO33
+        */
+       int devslp_mux;
+
+       /*
+        * DEVSLP Disable
+        * 0: DEVSLP is enabled
+        * 1: DEVSLP is disabled
+        */
+       int devslp_disable;
+};
+
+static void broadwell_sata_init(struct udevice *dev)
+{
+       struct sata_platdata *plat = dev_get_platdata(dev);
+       u32 reg32;
+       u8 *abar;
+       u16 reg16;
+       int port;
+
+       debug("SATA: Initializing controller in AHCI mode.\n");
+
+       /* Set timings */
+       dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE);
+       dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE);
+
+       /* for AHCI, Port Enable is managed in memory mapped space */
+       dm_pci_read_config16(dev, 0x92, &reg16);
+       reg16 &= ~0xf;
+       reg16 |= 0x8000 | plat->port_map;
+       dm_pci_write_config16(dev, 0x92, reg16);
+       udelay(2);
+
+       /* Setup register 98h */
+       dm_pci_read_config32(dev, 0x98, &reg32);
+       reg32 &= ~((1 << 31) | (1 << 30));
+       reg32 |= 1 << 23;
+       reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */
+       dm_pci_write_config32(dev, 0x98, reg32);
+
+       /* Setup register 9Ch */
+       reg16 = 0;           /* Disable alternate ID */
+       reg16 = 1 << 5;      /* BWG step 12 */
+       dm_pci_write_config16(dev, 0x9c, reg16);
+
+       /* SATA Initialization register */
+       reg32 = 0x183;
+       reg32 |= (plat->port_map ^ 0xf) << 24;
+       reg32 |= (plat->devslp_mux & 1) << 15;
+       dm_pci_write_config32(dev, 0x94, reg32);
+
+       /* Initialize AHCI memory-mapped space */
+       dm_pci_read_config32(dev, PCI_BASE_ADDRESS_5, &reg32);
+       abar = (u8 *)reg32;
+       debug("ABAR: %p\n", abar);
+
+       /* CAP (HBA Capabilities) : enable power management */
+       clrsetbits_le32(abar + 0x00, 0x00020060 /* SXS+EMS+PMS */,
+                       0x0c006000 /* PSC+SSC+SALP+SSS */ |
+                       1 << 18); /* SAM: SATA AHCI MODE ONLY */
+
+       /* PI (Ports implemented) */
+       writel(plat->port_map, abar + 0x0c);
+       (void) readl(abar + 0x0c); /* Read back 1 */
+       (void) readl(abar + 0x0c); /* Read back 2 */
+
+       /* CAP2 (HBA Capabilities Extended)*/
+       if (plat->devslp_disable) {
+               clrbits_le32(abar + 0x24, 1 << 3);
+       } else {
+               /* Enable DEVSLP */
+               setbits_le32(abar + 0x24, 1 << 5 | 1 << 4 | 1 << 3 | 1 << 2);
+
+               for (port = 0; port < 4; port++) {
+                       if (!(plat->port_map & (1 << port)))
+                               continue;
+                       /* DEVSLP DSP */
+                       setbits_le32(abar + 0x144 + (0x80 * port), 1 << 1);
+               }
+       }
+
+       /* Static Power Gating for unused ports */
+       reg32 = readl(RCB_REG(0x3a84));
+       /* Port 3 and 2 disabled */
+       if ((plat->port_map & ((1 << 3)|(1 << 2))) == 0)
+               reg32 |= (1 << 24) | (1 << 26);
+       /* Port 1 and 0 disabled */
+       if ((plat->port_map & ((1 << 1)|(1 << 0))) == 0)
+               reg32 |= (1 << 20) | (1 << 18);
+       writel(reg32, RCB_REG(0x3a84));
+
+       /* Set Gen3 Transmitter settings if needed */
+       if (plat->port0_gen3_tx)
+               pch_iobp_update(SATA_IOBP_SP0_SECRT88,
+                               ~(SATA_SECRT88_VADJ_MASK <<
+                                 SATA_SECRT88_VADJ_SHIFT),
+                               (plat->port0_gen3_tx &
+                                SATA_SECRT88_VADJ_MASK)
+                               << SATA_SECRT88_VADJ_SHIFT);
+
+       if (plat->port1_gen3_tx)
+               pch_iobp_update(SATA_IOBP_SP1_SECRT88,
+                               ~(SATA_SECRT88_VADJ_MASK <<
+                                 SATA_SECRT88_VADJ_SHIFT),
+                               (plat->port1_gen3_tx &
+                                SATA_SECRT88_VADJ_MASK)
+                               << SATA_SECRT88_VADJ_SHIFT);
+
+       /* Set Gen3 DTLE DATA / EDGE registers if needed */
+       if (plat->port0_gen3_dtle) {
+               pch_iobp_update(SATA_IOBP_SP0DTLE_DATA,
+                               ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
+                               (plat->port0_gen3_dtle & SATA_DTLE_MASK)
+                               << SATA_DTLE_DATA_SHIFT);
+
+               pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE,
+                               ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
+                               (plat->port0_gen3_dtle & SATA_DTLE_MASK)
+                               << SATA_DTLE_EDGE_SHIFT);
+       }
+
+       if (plat->port1_gen3_dtle) {
+               pch_iobp_update(SATA_IOBP_SP1DTLE_DATA,
+                               ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
+                               (plat->port1_gen3_dtle & SATA_DTLE_MASK)
+                               << SATA_DTLE_DATA_SHIFT);
+
+               pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE,
+                               ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
+                               (plat->port1_gen3_dtle & SATA_DTLE_MASK)
+                               << SATA_DTLE_EDGE_SHIFT);
+       }
+
+       /*
+        * Additional Programming Requirements for Power Optimizer
+        */
+
+       /* Step 1 */
+       pch_common_sir_write(dev, 0x64, 0x883c9003);
+
+       /* Step 2: SIR 68h[15:0] = 880Ah */
+       reg32 = pch_common_sir_read(dev, 0x68);
+       reg32 &= 0xffff0000;
+       reg32 |= 0x880a;
+       pch_common_sir_write(dev, 0x68, reg32);
+
+       /* Step 3: SIR 60h[3] = 1 */
+       reg32 = pch_common_sir_read(dev, 0x60);
+       reg32 |= (1 << 3);
+       pch_common_sir_write(dev, 0x60, reg32);
+
+       /* Step 4: SIR 60h[0] = 1 */
+       reg32 = pch_common_sir_read(dev, 0x60);
+       reg32 |= (1 << 0);
+       pch_common_sir_write(dev, 0x60, reg32);
+
+       /* Step 5: SIR 60h[1] = 1 */
+       reg32 = pch_common_sir_read(dev, 0x60);
+       reg32 |= (1 << 1);
+       pch_common_sir_write(dev, 0x60, reg32);
+
+       /* Clock Gating */
+       pch_common_sir_write(dev, 0x70, 0x3f00bf1f);
+       pch_common_sir_write(dev, 0x54, 0xcf000f0f);
+       pch_common_sir_write(dev, 0x58, 0x00190000);
+       clrsetbits_le32(RCB_REG(0x333c), 0x00300000, 0x00c00000);
+
+       dm_pci_read_config32(dev, 0x300, &reg32);
+       reg32 |= 1 << 17 | 1 << 16 | 1 << 19;
+       reg32 |= 1 << 31 | 1 << 30 | 1 << 29;
+       dm_pci_write_config32(dev, 0x300, reg32);
+
+       dm_pci_read_config32(dev, 0x98, &reg32);
+       reg32 |= 1 << 29;
+       dm_pci_write_config32(dev, 0x98, reg32);
+
+       /* Register Lock */
+       dm_pci_read_config32(dev, 0x9c, &reg32);
+       reg32 |= 1 << 31;
+       dm_pci_write_config32(dev, 0x9c, reg32);
+}
+
+static int broadwell_sata_enable(struct udevice *dev)
+{
+       struct sata_platdata *plat = dev_get_platdata(dev);
+       struct gpio_desc desc;
+       u16 map;
+       int ret;
+
+       /*
+        * Set SATA controller mode early so the resource allocator can
+        * properly assign IO/Memory resources for the controller.
+        */
+       map = 0x0060;
+
+       map |= (plat->port_map ^ 0x3f) << 8;
+       dm_pci_write_config16(dev, 0x90, map);
+
+       ret = gpio_request_by_name(dev, "reset-gpio", 0, &desc, GPIOD_IS_OUT);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static int broadwell_sata_ofdata_to_platdata(struct udevice *dev)
+{
+       struct sata_platdata *plat = dev_get_platdata(dev);
+       const void *blob = gd->fdt_blob;
+       int node = dev->of_offset;
+
+       plat->port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
+       plat->port0_gen3_tx = fdtdec_get_int(blob, node,
+                                       "intel,sata-port0-gen3-tx", 0);
+
+       return 0;
+}
+
+static int broadwell_sata_probe(struct udevice *dev)
+{
+       if (!(gd->flags & GD_FLG_RELOC))
+               return broadwell_sata_enable(dev);
+       else
+               broadwell_sata_init(dev);
+
+       return 0;
+}
+
+static const struct udevice_id broadwell_ahci_ids[] = {
+       { .compatible = "intel,wildcatpoint-ahci" },
+       { }
+};
+
+U_BOOT_DRIVER(ahci_broadwell_drv) = {
+       .name           = "ahci_broadwell",
+       .id             = UCLASS_DISK,
+       .of_match       = broadwell_ahci_ids,
+       .ofdata_to_platdata     = broadwell_sata_ofdata_to_platdata,
+       .probe          = broadwell_sata_probe,
+       .platdata_auto_alloc_size        = sizeof(struct sata_platdata),
+};