omap3: add support for QUIPOS Cairo board.

This patch extends OMAP3 support for AM/DM37xx and
introduces the AM3703-based Quipos Cairo board.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 4a0ac2c987a224dfe714d3f4da4045c07157e4c6..65da6e2c1752b285f994ff03d8d6cb4309ba339c 100644 (file)
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -91,6 +91,10 @@ config TARGET_TWISTER
        bool "Twister"
        select SUPPORT_SPL
 
+config TARGET_OMAP3_CAIRO
+       bool "QUIPOS CAIRO"
+       select SUPPORT_SPL
+
 endchoice
 
 config DM
@@ -133,5 +137,6 @@ source "board/matrix_vision/mvblx/Kconfig"
 source "board/nokia/rx51/Kconfig"
 source "board/technexion/tao3530/Kconfig"
 source "board/technexion/twister/Kconfig"
+source "board/quipos/cairo/Kconfig"
 
 endif

diff --git a/board/quipos/cairo/Kconfig b/board/quipos/cairo/Kconfig
new file mode 100644 (file)
index 0000000..8df9421
--- /dev/null
+++ b/board/quipos/cairo/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_OMAP3_CAIRO
+
+config SYS_BOARD
+       default "cairo"
+
+config SYS_VENDOR
+       default "quipos"
+
+config SYS_CONFIG_NAME
+       default "omap3_cairo"
+
+endif

diff --git a/board/quipos/cairo/Makefile b/board/quipos/cairo/Makefile
new file mode 100644 (file)
index 0000000..445088f
--- /dev/null
+++ b/board/quipos/cairo/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2014 DENX Software Engineering
+# Written-By: Albert ARIBAUD <albert.aribaud@3adev.fr>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y  := cairo.o

diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
new file mode 100644 (file)
index 0000000..b97a09a
--- /dev/null
+++ b/board/quipos/cairo/cairo.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2014 DENX
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * Derived from code written by Robert Aigner (ra@spiid.net)
+ *
+ * Itself derived from Beagle Board and 3430 SDP code by
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <netdev.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+#include <asm/omap_mmc.h>
+#include "cairo.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * MUSB port on OMAP3EVM Rev >= E requires extvbus programming.
+ */
+u8 omap3_evm_need_extvbus(void)
+{
+       u8 retval = 0;
+
+       /* TODO: verify if cairo handheld platform needs extvbus programming */
+
+       return retval;
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+       gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+       /* board id for Linux */
+       gd->bd->bi_arch_number = MACH_TYPE_OMAP3_CAIRO;
+       /* boot param addr */
+       gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+       return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *             hardware. Many pins need to be moved from protect to primary
+ *             mode.
+ */
+void set_muxconf_regs(void)
+{
+       MUX_CAIRO();
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+       return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank.  This
+ * provides the timing values back to the function that configures
+ * the memory.
+ *
+ * The Cairo board uses SAMSUNG DDR - K4X51163PG-FGC6
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+       timings->sharing = SAMSUNG_SHARING;
+       timings->mcfg = SAMSUNG_V_MCFG_165(128 << 20);
+       timings->ctrla = SAMSUNG_V_ACTIMA_165;
+       timings->ctrlb = SAMSUNG_V_ACTIMB_165;
+       timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+       timings->mr = SAMSUNG_V_MR_165;
+}
+#endif
+
+static const struct ns16550_platdata cairo_serial = {
+       OMAP34XX_UART2,
+       2,
+       V_NS16550_CLK
+};
+
+U_BOOT_DEVICE(cairo_uart) = {
+       "serial_omap",
+       &cairo_serial
+};
+
+/* force SPL booting into U-Boot, not Linux */
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+       return 1;
+}
+#endif

diff --git a/board/quipos/cairo/cairo.h b/board/quipos/cairo/cairo.h
new file mode 100644 (file)
index 0000000..50734d0
--- /dev/null
+++ b/board/quipos/cairo/cairo.h
@@ -0,0 +1,319 @@
+/*
+ * Copyright (C) DENX
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * Original code (C) Copyright 2010
+ * Robert Aigner (ra@spiid.net)
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#ifndef _EVM_H_
+#define _EVM_H_
+
+
+const omap3_sysinfo sysinfo = {
+       DDR_DISCRETE,
+       "OMAP3 Cairo board",
+       "NAND",
+};
+
+/*
+ * OMAP3 Cairo handheld hardware revision
+ */
+enum {
+       OMAP3_CAIRO_BOARD_GEN_1 = 0,    /* Cairo handheld V01 */
+       OMAP3_CAIRO_BOARD_GEN_2,
+};
+
+#define MUX_CAIRO() \
+MUX_VAL(CONTROL_PADCONF_GPIO112, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO113, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO114, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO115, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO126, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO127, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO128, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPIO129, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D0, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D1, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D2, (IEN | DIS | SB_HIZ | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D3, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D4, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D5, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D6, (IEN | PTD | EN | SB_HIZ | SB_PD | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D7, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D8, (IEN | DIS | SB_HIZ | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D9, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D10, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_CAM_D11, (IEN | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_FLD, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_HS, (IEN | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_PCLK, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_STROBE, (IDIS | PTU | EN | SB_HI | SB_PU | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_VS, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_WEN, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_XCLKA, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_CAM_XCLKB, (IEN | DIS | SB_HIZ | SB_PD | M7)) \
+MUX_VAL(CONTROL_PADCONF_DSS_ACBIAS, (IDIS | PTD | EN | SB_HIZ | SB_PD | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA0, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA1, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA2, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA3, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA4, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA5, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA6, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA7, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA8, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA9, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA10, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA11, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA12, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA13, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA14, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA15, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA16, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA17, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA18, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA19, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA20, (IDIS | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA21, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA22, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_DATA23, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_HSYNC, (IDIS | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_PCLK, (IDIS | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_DSS_VSYNC, (IDIS | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_ETK_CLK_ES2, (IDIS | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_CTL_ES2, (IDIS | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D0_ES2, (IEN | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D1_ES2, (IEN | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D2_ES2, (IEN | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D3_ES2, (IEN | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D4_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D5_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D6_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D7_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D8_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D9_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D10_ES2, (IDIS | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D11_ES2, (IDIS | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D12_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D13_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D14_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_ETK_D15_ES2, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A1, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A2, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A3, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A4, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A5, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A6, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A7, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A8, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A9, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A10, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_A11, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_CLK, (IEN | DIS | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D0, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D1, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D2, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D3, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D4, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D5, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D6, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D7, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D8, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D9, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D10, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D11, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D12, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D13, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D14, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_D15, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NADV_ALE, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NBE0_CLE, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NBE1, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS0, (IDIS | DIS | SB_HIZ | SB_PD | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS1, (IEN | DIS | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS2, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS3, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS4, (IDIS | DIS | SB_HIZ | SB_PD | M3)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS5, (IDIS | DIS | SB_HIZ | SB_PD | M3)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS6, (IDIS | DIS | SB_HIZ | SB_PD | M3)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NCS7, (IDIS | DIS | SB_HIZ | SB_PD | M3)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NOE, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NWE, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_NWP, (IDIS | DIS | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_WAIT0, (IEN | DIS | SB_HIZ | M0)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_WAIT1, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_WAIT2, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_GPMC_WAIT3, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_HDQ_SIO, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_CLK, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA0, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA1, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA2, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA3, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA4, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA5, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA6, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DATA7, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_DIR, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_NXT, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_HSUSB0_STP, (IDIS | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_I2C1_SCL, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_I2C1_SDA, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_I2C2_SCL, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_I2C2_SDA, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_I2C3_SCL, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_I2C3_SDA, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_I2C4_SCL, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_I2C4_SDA, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_EMU0, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_EMU1, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_NTRST, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_RTCK, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_TCK, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_TDI, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_TDO, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_JTAG_TMS, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP_CLKS, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP1_CLKR, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP1_CLKX, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP1_DR, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP1_DX, (IEN | DIS | SB_HIZ | SB_PD | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP1_FSR, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP1_FSX, (IEN | DIS | SB_HIZ | M4)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP2_CLKX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP2_DR, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP2_DX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP2_FSX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP3_CLKX, (IDIS | DIS | SB_HIZ | SB_PU | M1)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP3_DR, (IDIS | PTD | EN | SB_LOW | SB_PD | M4)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP3_DX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP3_FSX, (IEN | PTU | EN | SB_HIZ | SB_PU | M1)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP4_CLKX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP4_DR, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP4_DX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCBSP4_FSX, (IEN | PTD | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_CLK, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_CS0, (IEN | PTU | EN | SB_HIZ | SB_PD | M0)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_CS1, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_CS2, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_CS3, (IEN | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_SIMO, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI1_SOMI, (IEN | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI2_CLK, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI2_CS0, (IEN | PTU | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI2_CS1, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI2_SIMO, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_MCSPI2_SOMI, (IEN | PTD | EN | M3)) \
+MUX_VAL(CONTROL_PADCONF_MMC1_CLK, (IDIS | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC1_CMD, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC1_DAT0, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC1_DAT1, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC1_DAT2, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC1_DAT3, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_CLK, (IEN | PTD | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_CMD, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT0, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT1, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT2, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT3, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT4, (IDIS | DIS | SB_HIZ | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT5, (IDIS | DIS | SB_HIZ | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT6, (IDIS | DIS | SB_HIZ | M0)) \
+MUX_VAL(CONTROL_PADCONF_MMC2_DAT7, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A0, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A1, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A2, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A3, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A4, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A5, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A6, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A7, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A8, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A9, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A10, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A11, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A12, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A13, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_A14, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_BA0, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_BA1, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_CKE0, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_CKE1, (IDIS | DIS | M7)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_CLK, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D0, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D1, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D2, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D3, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D4, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D5, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D6, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D7, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D8, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D9, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D10, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D11, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D12, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D13, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D14, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D15, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D16, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D17, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D18, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D19, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D20, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D21, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D22, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D23, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D24, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D25, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D26, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D27, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D28, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D29, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D30, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_D31, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DM0, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DM1, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DM2, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DM3, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DQS0, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DQS1, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DQS2, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_DQS3, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_NCAS, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_NCLK, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_NCS0, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_NCS1, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_NRAS, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SDRC_NWE, (IDIS | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_32K, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT0, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT1, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT2, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT3, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT4, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT5, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_BOOT6, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_CLKOUT1, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_CLKOUT2, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_CLKREQ, (IEN | DIS | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_NIRQ, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_NRESWARM, (IEN | PTU | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_SYS_OFF_MODE, (IDIS | PTD | EN | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART1_CTS, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART1_RTS, (IDIS | DIS | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART1_RX, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART1_TX, (IDIS | DIS | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART2_CTS, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_UART2_RTS, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_UART2_RX, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_UART2_TX, (IEN | PTU | EN | M7)) \
+MUX_VAL(CONTROL_PADCONF_UART3_CTS_RCTX, \
+       (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART3_RTS_SD, (IDIS | DIS | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART3_RX_IRRX, (IEN | PTU | EN | SB_HIZ | SB_PU | M0)) \
+MUX_VAL(CONTROL_PADCONF_UART3_TX_IRTX, (IDIS | DIS | SB_HIZ | SB_PU | M0)) \
+
+#endif

diff --git a/configs/cairo_defconfig b/configs/cairo_defconfig
new file mode 100644 (file)
index 0000000..ae1dda2
--- /dev/null
+++ b/configs/cairo_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_OMAP34XX=y
++S:CONFIG_TARGET_OMAP3_CAIRO=y

diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
new file mode 100644 (file)
index 0000000..3030054
--- /dev/null
+++ b/include/configs/omap3_cairo.h
@@ -0,0 +1,286 @@
+/*
+ * Configuration settings for the QUIPOS Cairo board.
+ *
+ * Copyright (C) DENX GmbH
+ *
+ * Author :
+ *     Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * Derived from EVM  code by
+ *     Manikandan Pillai <mani.pillai@ti.com>
+ * Itself derived from Beagle Board and 3430 SDP code by
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * Also derived from include/configs/omap3_beagle.h
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __OMAP3_CAIRO_CONFIG_H
+#define __OMAP3_CAIRO_CONFIG_H
+
+#define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.  We use this rather than the inherited defines from
+ * ti_armv7_common.h for backwards compatibility.
+ */
+#define CONFIG_SYS_TEXT_BASE           0x80100000
+#define CONFIG_SYS_UBOOT_START         CONFIG_SYS_TEXT_BASE
+#define CONFIG_SPL_BSS_START_ADDR      0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE                (512 << 10)     /* 512 KB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
+
+#define CONFIG_NAND
+
+#include <configs/ti_omap3_common.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO         1
+#define CONFIG_DISPLAY_BOARDINFO       1
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_REVISION_TAG            1
+#define CONFIG_ENV_OVERWRITE
+
+/* Enable Multi Bus support for I2C */
+#define CONFIG_I2C_MULTI_BUS           1
+
+/* Probe all devices */
+#define CONFIG_SYS_I2C_NOPROBES                { {0x0, 0x0} }
+
+#define CONFIG_NAND
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_SETEXPR     /* Evaluate expressions         */
+#define CONFIG_CMD_NAND_LOCK_UNLOCK
+
+/* Disable some commands */
+#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
+#undef CONFIG_CMD_IMI          /* iminfo                       */
+#undef CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_LED             1
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST     1
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
+                                                       /* devices */
+/* override default CONFIG_BOOTDELAY */
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY       0
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "machid=ffffffff\0" \
+       "fdt_high=0x87000000\0" \
+       "baudrate=115200\0" \
+       "ethaddr=00:50:C2:7E:90:F0\0" \
+       "fec_addr=00:50:C2:7E:90:F0\0" \
+       "netmask=255.255.255.0\0" \
+       "ipaddr=192.168.2.9\0" \
+       "gateway=192.168.2.1\0" \
+       "serverip=192.168.2.10\0" \
+       "nfshost=192.168.2.10\0" \
+       "stdin=serial\0" \
+       "stdout=serial\0" \
+       "stderr=serial\0" \
+       "bootargs_mmc_ramdisk=mem=128M " \
+               "console=ttyO1,115200n8 " \
+               "root=/dev/ram0 rw " \
+               "initrd=0x81600000,16M " \
+               "mpurate=600 ramdisk_size=16384 omapfb.rotate=1 " \
+               "omapfb.rotate_type=1 omap_vout.vid1_static_vrfb_alloc=y\0" \
+       "mmcboot=mmc init; " \
+               "fatload mmc 0 0x80000000 uImage; " \
+               "fatload mmc 0 0x81600000 ramdisk.gz; " \
+               "setenv bootargs ${bootargs_mmc_ramdisk}; " \
+               "bootm 0x80000000\0" \
+       "bootargs_nfs=mem=99M console=ttyO0,115200n8 noinitrd rw ip=dhcp " \
+       "root=/dev/nfs " \
+       "nfsroot=192.168.2.10:/home/spiid/workdir/Quipos/rootfs,nolock " \
+       "mpurate=600 omapfb.rotate=1 omapfb.rotate_type=1 " \
+       "omap_vout.vid1_static_vrfb_alloc=y\0" \
+       "boot_nfs=run get_kernel; setenv bootargs ${bootargs_nfs}; " \
+       "bootm 0x80000000\0" \
+       "bootargs_nand=mem=128M console=ttyO1,115200n8 noinitrd " \
+       "root=/dev/mtdblock4 rw rootfstype=jffs2 mpurate=600 " \
+       "omap_vout.vid1_static_vrfb_alloc=y omapfb.rotate=1 " \
+       "omapfb.rotate_type=1\0" \
+       "boot_nand=nand read.i 0x80000000 280000 300000; setenv " \
+       "bootargs ${bootargs_nand}; bootm 0x80000000\0" \
+       "ledorange=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \
+       "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \
+       "i2c mw 60 09 10 1; i2c mw 60 06 10 1\0" \
+       "ledgreen=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \
+       "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; i2c " \
+       "mw 60 09 00 1; i2c mw 60 06 10 1\0" \
+       "ledoff=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \
+       "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \
+       "i2c mw 60 09 00 1; i2c mw 60 06 0 1\0" \
+       "ledred=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \
+       "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \
+       "i2c mw 60 09 10 1; i2c mw 60 06 0 1\0" \
+       "flash_xloader=mw.b 0x81600000 0xff 0x20000; " \
+               "nand erase 0 20000; " \
+               "fatload mmc 0 0x81600000 MLO; " \
+               "nandecc hw; " \
+               "nand write.i 0x81600000 0 20000;\0" \
+       "flash_uboot=mw.b 0x81600000 0xff 0x40000; " \
+               "nand erase 80000 40000; " \
+               "fatload mmc 0 0x81600000 u-boot.bin; " \
+               "nandecc sw; " \
+               "nand write.i 0x81600000 80000 40000;\0" \
+       "flash_kernel=mw.b 0x81600000 0xff 0x300000; " \
+               "nand erase 280000 300000; " \
+               "fatload mmc 0 0x81600000 uImage; " \
+               "nandecc sw; " \
+               "nand write.i 0x81600000 280000 300000;\0" \
+       "flash_rootfs=fatload mmc 0 0x81600000 rootfs.jffs2; " \
+               "nandecc sw; " \
+               "nand write.jffs2 0x680000 0xFF ${filesize}; " \
+               "nand erase 680000 ${filesize}; " \
+               "nand write.jffs2 81600000 680000 ${filesize};\0" \
+       "flash_scrub=nand scrub; " \
+               "run flash_xloader; " \
+               "run flash_uboot; " \
+               "run flash_kernel; " \
+               "run flash_rootfs;\0" \
+       "flash_all=run ledred; " \
+               "nand erase.chip; " \
+               "run ledorange; " \
+               "run flash_xloader; " \
+               "run flash_uboot; " \
+               "run flash_kernel; " \
+               "run flash_rootfs; " \
+               "run ledgreen; " \
+               "run boot_nand; \0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "if fatload mmc 0 0x81600000 MLO; then run flash_all; " \
+       "else run boot_nand; fi"
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
+#endif
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND          1
+#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
+#define ONENAND_ENV_OFFSET             0x260000 /* environment starts here */
+#define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
+
+#define CONFIG_OMAP3_SPI
+
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
+/* Defines for SPL */
+#define CONFIG_SPL_OMAP3_ID_NAND
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
+#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
+                                               10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS                0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
+#endif
+
+/* env defaults */
+#define CONFIG_BOOTFILE                        "uImage"
+
+/* Override OMAP3 common serial console configuration from UART3
+ * to UART2.
+ *
+ * Attention: for UART2, special MUX settings (MUX_DEFAULT(), MCBSP3)
+ * are needed and peripheral clocks for UART2 must be enabled in
+ * function per_clocks_enable().
+ */
+#undef CONFIG_CONS_INDEX
+#define CONFIG_CONS_INDEX              2
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_SYS_NS16550_COM3
+#define CONFIG_SYS_NS16550_COM2                OMAP34XX_UART2
+#undef CONFIG_SERIAL3
+#define CONFIG_SERIAL2
+#endif
+
+/* Keep old prompt in case some existing script depends on it */
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT              "Cairo # "
+
+/* Provide MACH_TYPE for compatibility with non-DT kernels */
+#define MACH_TYPE_OMAP3_CAIRO  3063
+#define CONFIG_MACH_TYPE       MACH_TYPE_OMAP3_CAIRO
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors */
+                                               /* on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS       (CONFIG_SYS_MAX_FLASH_BANKS + \
+                                       CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+/* use flash_info[2] */
+#define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1
+
+#endif /* __OMAP3_CAIRO_CONFIG_H */