ARM: imx: imx8mn-evk: change environment address variables

Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enough space to load kernel images bigger than 32MB change the
variables to a feasible value.

The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".

The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 474d9cfa4d2ecf22e8139d1a01adba451d4f0f49..5289790f055b497a83d4dde8c37d7e7f9ce9b979 100644 (file)
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -16,7 +16,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000

diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index 8ba2bd647b19a1577c3446a1fe55a048e92b728c..6d64b5e233d7d2d93366727941dd1b942d890bc4 100644 (file)
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -16,7 +16,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000

diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 86b75ab4625b50043ad8d13b2fca354db389f1d9..034132225c6e5acae89ebcd03395da4d16ff2053 100644 (file)
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -39,19 +39,27 @@
 #endif
 
 /* Initial environment variables */
+/* see include/configs/ti_armv7_common.h */
+#define ENV_MEM_LAYOUT_SETTINGS \
+       "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "kernel_addr_r=0x42000000\0" \
+       "fdt_addr_r=0x48000000\0" \
+       "fdtoverlay_addr_r=0x49000000\0" \
+       "ramdisk_addr_r=0x48080000\0" \
+       "initrd_addr=0x48080000\0" \
+       "scriptaddr=0x40000000\0" \
+       "pxefile_addr_r=0x40100000\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "image=Image\0" \
        BOOTENV \
-       "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "console=ttymxc1,115200\0" \
-       "fdt_addr_r=0x43000000\0"                       \
        "boot_fit=no\0" \
        "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-       "initrd_addr=0x43800000\0"              \
        "bootm_size=0x10000000\0" \
        "mmcpart=1\0" \
        "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+       ENV_MEM_LAYOUT_SETTINGS
 
 /* Link Definitions */