usb: dwc3: Implement .glue_configure for i.MX8MP

The i.MX8MP glue needs to be configured based on a couple of DT
properties, implement .glue_configure callback to parse those DT
properties and configure the glue accordingly.

Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice-gw74xx
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 7e3814207e4e609912adee6cbfd696aeb8604754..6cf844cb483b15b8c883ca20e7e6522b4a823dc8 100644 (file)
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -223,6 +223,57 @@ struct dwc3_glue_ops {
                               enum usb_dr_mode mode);
 };
 
+void dwc3_imx8mp_glue_configure(struct udevice *dev, int index,
+                               enum usb_dr_mode mode)
+{
+/* USB glue registers */
+#define USB_CTRL0              0x00
+#define USB_CTRL1              0x04
+
+#define USB_CTRL0_PORTPWR_EN   BIT(12) /* 1 - PPC enabled (default) */
+#define USB_CTRL0_USB3_FIXED   BIT(22) /* 1 - USB3 permanent attached */
+#define USB_CTRL0_USB2_FIXED   BIT(23) /* 1 - USB2 permanent attached */
+
+#define USB_CTRL1_OC_POLARITY  BIT(16) /* 0 - HIGH / 1 - LOW */
+#define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */
+       fdt_addr_t regs = dev_read_addr_index(dev, 1);
+       void *base = map_physmem(regs, 0x8, MAP_NOCACHE);
+       u32 value;
+
+       value = readl(base + USB_CTRL0);
+
+       if (dev_read_bool(dev, "fsl,permanently-attached"))
+               value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+       else
+               value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
+
+       if (dev_read_bool(dev, "fsl,disable-port-power-control"))
+               value &= ~(USB_CTRL0_PORTPWR_EN);
+       else
+               value |= USB_CTRL0_PORTPWR_EN;
+
+       writel(value, base + USB_CTRL0);
+
+       value = readl(base + USB_CTRL1);
+       if (dev_read_bool(dev, "fsl,over-current-active-low"))
+               value |= USB_CTRL1_OC_POLARITY;
+       else
+               value &= ~USB_CTRL1_OC_POLARITY;
+
+       if (dev_read_bool(dev, "fsl,power-active-low"))
+               value |= USB_CTRL1_PWR_POLARITY;
+       else
+               value &= ~USB_CTRL1_PWR_POLARITY;
+
+       writel(value, base + USB_CTRL1);
+
+       unmap_physmem(base, MAP_NOCACHE);
+}
+
+struct dwc3_glue_ops imx8mp_ops = {
+       .glue_configure = dwc3_imx8mp_glue_configure,
+};
+
 void dwc3_ti_glue_configure(struct udevice *dev, int index,
                            enum usb_dr_mode mode)
 {
@@ -464,6 +515,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
        { .compatible = "rockchip,rk3328-dwc3" },
        { .compatible = "rockchip,rk3399-dwc3" },
        { .compatible = "qcom,dwc3" },
+       { .compatible = "fsl,imx8mp-dwc3", .data = (ulong)&imx8mp_ops },
        { .compatible = "fsl,imx8mq-dwc3" },
        { .compatible = "intel,tangier-dwc3" },
        { }