net: phy: realtek: make define more consistent

All internal defines in the realtek phy are with a small X,
except MIIM_RTL8211X_CTRL1000T_MASTER. Make this more consistent

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 35b934b8f0d0257cc0a947deb6aeb016dfa0eb39..62b8c1eb78776319cef00623291af60d5f178448 100644 (file)
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -16,7 +16,7 @@
 
 /* RTL8211x 1000BASE-T Control Register */
 #define MIIM_RTL8211x_CTRL1000T_MSCE BIT(12);
-#define MIIM_RTL8211X_CTRL1000T_MASTER BIT(11);
+#define MIIM_RTL8211x_CTRL1000T_MASTER BIT(11);
 
 /* RTL8211x PHY Status Register */
 #define MIIM_RTL8211x_PHY_STATUS       0x11
@@ -64,7 +64,7 @@ static int rtl8211x_config(struct phy_device *phydev)
        /* force manual master/slave configuration */
        reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
        /* force master mode */
-       reg |= MIIM_RTL8211X_CTRL1000T_MASTER;
+       reg |= MIIM_RTL8211x_CTRL1000T_MASTER;
        phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
 #endif
        /* read interrupt status just to clear it */