arm: dts: k3-am654-r5-base-board: add supply rail for MPU

MPU voltage on AM65x-evm is controlled via the TPS62363 chip attached
to i2c0 bus. Add device node for this so that it can be controlled via
a regulator driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>

diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 98868afd9c0289ec157ede9596815ec2c8d2d95e..baa3a2c9e7ead5139b9753eef0fa2d17b885b005 100644 (file)
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -219,4 +219,17 @@
        pinctrl-0 = <&wkup_i2c0_pins_default>;
        clock-frequency = <400000>;
        u-boot,dm-spl;
+
+       vdd_mpu: tps62363@60 {
+               compatible = "ti,tps62363";
+               reg = <0x60>;
+               regulator-name = "VDD_MPU";
+               regulator-min-microvolt = <500000>;
+               regulator-max-microvolt = <1770000>;
+               regulator-always-on;
+               regulator-boot-on;
+               ti,vsel0-state-high;
+               ti,vsel1-state-high;
+               u-boot,dm-spl;
+       };
 };