Add SCFW macro definition.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2018 NXP
+ *
+ */
+
+#ifndef SC_RPC_H
+#define SC_RPC_H
+
+/* Note: Check SCFW API Released DOC before you want to modify something */
+#define SC_RPC_VERSION 1U
+
+#define SC_RPC_MAX_MSG 8U
+
+#define RPC_VER(MSG) ((MSG)->version)
+#define RPC_SIZE(MSG) ((MSG)->size)
+#define RPC_SVC(MSG) ((MSG)->svc)
+#define RPC_FUNC(MSG) ((MSG)->func)
+#define RPC_R8(MSG) ((MSG)->func)
+#define RPC_I32(MSG, IDX) ((MSG)->DATA.i32[(IDX) / 4U])
+#define RPC_I16(MSG, IDX) ((MSG)->DATA.i16[(IDX) / 2U])
+#define RPC_I8(MSG, IDX) ((MSG)->DATA.i8[(IDX)])
+#define RPC_U32(MSG, IDX) ((MSG)->DATA.u32[(IDX) / 4U])
+#define RPC_U16(MSG, IDX) ((MSG)->DATA.u16[(IDX) / 2U])
+#define RPC_U8(MSG, IDX) ((MSG)->DATA.u8[(IDX)])
+
+#define SC_RPC_SVC_UNKNOWN 0U
+#define SC_RPC_SVC_RETURN 1U
+#define SC_RPC_SVC_PM 2U
+#define SC_RPC_SVC_RM 3U
+#define SC_RPC_SVC_TIMER 5U
+#define SC_RPC_SVC_PAD 6U
+#define SC_RPC_SVC_MISC 7U
+#define SC_RPC_SVC_IRQ 8U
+#define SC_RPC_SVC_ABORT 9U
+
+/* Types */
+
+struct sc_rpc_msg_s {
+ u8 version;
+ u8 size;
+ u8 svc;
+ u8 func;
+ union {
+ s32 i32[(SC_RPC_MAX_MSG - 1U)];
+ s16 i16[(SC_RPC_MAX_MSG - 1U) * 2U];
+ s8 i8[(SC_RPC_MAX_MSG - 1U) * 4U];
+ u32 u32[(SC_RPC_MAX_MSG - 1U)];
+ u16 u16[(SC_RPC_MAX_MSG - 1U) * 2U];
+ u8 u8[(SC_RPC_MAX_MSG - 1U) * 4U];
+ } DATA;
+};
+
+/* PM RPC */
+#define PM_FUNC_UNKNOWN 0
+#define PM_FUNC_SET_SYS_POWER_MODE 19U
+#define PM_FUNC_SET_PARTITION_POWER_MODE 1U
+#define PM_FUNC_GET_SYS_POWER_MODE 2U
+#define PM_FUNC_SET_RESOURCE_POWER_MODE 3U
+#define PM_FUNC_GET_RESOURCE_POWER_MODE 4U
+#define PM_FUNC_REQ_LOW_POWER_MODE 16U
+#define PM_FUNC_REQ_CPU_LOW_POWER_MODE 20U
+#define PM_FUNC_SET_CPU_RESUME_ADDR 17U
+#define PM_FUNC_SET_CPU_RESUME 21U
+#define PM_FUNC_REQ_SYS_IF_POWER_MODE 18U
+#define PM_FUNC_SET_CLOCK_RATE 5U
+#define PM_FUNC_GET_CLOCK_RATE 6U
+#define PM_FUNC_CLOCK_ENABLE 7U
+#define PM_FUNC_SET_CLOCK_PARENT 14U
+#define PM_FUNC_GET_CLOCK_PARENT 15U
+#define PM_FUNC_RESET 13U
+#define PM_FUNC_RESET_REASON 10U
+#define PM_FUNC_BOOT 8U
+#define PM_FUNC_REBOOT 9U
+#define PM_FUNC_REBOOT_PARTITION 12U
+#define PM_FUNC_CPU_START 11U
+
+/* MISC RPC */
+#define MISC_FUNC_UNKNOWN 0
+#define MISC_FUNC_SET_CONTROL 1U
+#define MISC_FUNC_GET_CONTROL 2U
+#define MISC_FUNC_SET_MAX_DMA_GROUP 4U
+#define MISC_FUNC_SET_DMA_GROUP 5U
+#define MISC_FUNC_SECO_IMAGE_LOAD 8U
+#define MISC_FUNC_SECO_AUTHENTICATE 9U
+#define MISC_FUNC_SECO_FUSE_WRITE 20U
+#define MISC_FUNC_SECO_ENABLE_DEBUG 21U
+#define MISC_FUNC_SECO_FORWARD_LIFECYCLE 22U
+#define MISC_FUNC_SECO_RETURN_LIFECYCLE 23U
+#define MISC_FUNC_SECO_BUILD_INFO 24U
+#define MISC_FUNC_DEBUG_OUT 10U
+#define MISC_FUNC_WAVEFORM_CAPTURE 6U
+#define MISC_FUNC_BUILD_INFO 15U
+#define MISC_FUNC_UNIQUE_ID 19U
+#define MISC_FUNC_SET_ARI 3U
+#define MISC_FUNC_BOOT_STATUS 7U
+#define MISC_FUNC_BOOT_DONE 14U
+#define MISC_FUNC_OTP_FUSE_READ 11U
+#define MISC_FUNC_OTP_FUSE_WRITE 17U
+#define MISC_FUNC_SET_TEMP 12U
+#define MISC_FUNC_GET_TEMP 13U
+#define MISC_FUNC_GET_BOOT_DEV 16U
+#define MISC_FUNC_GET_BUTTON_STATUS 18U
+
+/* PAD RPC */
+#define PAD_FUNC_UNKNOWN 0
+#define PAD_FUNC_SET_MUX 1U
+#define PAD_FUNC_GET_MUX 6U
+#define PAD_FUNC_SET_GP 2U
+#define PAD_FUNC_GET_GP 7U
+#define PAD_FUNC_SET_WAKEUP 4U
+#define PAD_FUNC_GET_WAKEUP 9U
+#define PAD_FUNC_SET_ALL 5U
+#define PAD_FUNC_GET_ALL 10U
+#define PAD_FUNC_SET 15U
+#define PAD_FUNC_GET 16U
+#define PAD_FUNC_SET_GP_28FDSOI 11U
+#define PAD_FUNC_GET_GP_28FDSOI 12U
+#define PAD_FUNC_SET_GP_28FDSOI_HSIC 3U
+#define PAD_FUNC_GET_GP_28FDSOI_HSIC 8U
+#define PAD_FUNC_SET_GP_28FDSOI_COMP 13U
+#define PAD_FUNC_GET_GP_28FDSOI_COMP 14U
+
+/* RM RPC */
+#define RM_FUNC_UNKNOWN 0
+#define RM_FUNC_PARTITION_ALLOC 1U
+#define RM_FUNC_SET_CONFIDENTIAL 31U
+#define RM_FUNC_PARTITION_FREE 2U
+#define RM_FUNC_GET_DID 26U
+#define RM_FUNC_PARTITION_STATIC 3U
+#define RM_FUNC_PARTITION_LOCK 4U
+#define RM_FUNC_GET_PARTITION 5U
+#define RM_FUNC_SET_PARENT 6U
+#define RM_FUNC_MOVE_ALL 7U
+#define RM_FUNC_ASSIGN_RESOURCE 8U
+#define RM_FUNC_SET_RESOURCE_MOVABLE 9U
+#define RM_FUNC_SET_SUBSYS_RSRC_MOVABLE 28U
+#define RM_FUNC_SET_MASTER_ATTRIBUTES 10U
+#define RM_FUNC_SET_MASTER_SID 11U
+#define RM_FUNC_SET_PERIPHERAL_PERMISSIONS 12U
+#define RM_FUNC_IS_RESOURCE_OWNED 13U
+#define RM_FUNC_IS_RESOURCE_MASTER 14U
+#define RM_FUNC_IS_RESOURCE_PERIPHERAL 15U
+#define RM_FUNC_GET_RESOURCE_INFO 16U
+#define RM_FUNC_MEMREG_ALLOC 17U
+#define RM_FUNC_MEMREG_SPLIT 29U
+#define RM_FUNC_MEMREG_FREE 18U
+#define RM_FUNC_FIND_MEMREG 30U
+#define RM_FUNC_ASSIGN_MEMREG 19U
+#define RM_FUNC_SET_MEMREG_PERMISSIONS 20U
+#define RM_FUNC_IS_MEMREG_OWNED 21U
+#define RM_FUNC_GET_MEMREG_INFO 22U
+#define RM_FUNC_ASSIGN_PAD 23U
+#define RM_FUNC_SET_PAD_MOVABLE 24U
+#define RM_FUNC_IS_PAD_OWNED 25U
+#define RM_FUNC_DUMP 27U
+
+#endif /* SC_RPC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _SC_SCI_H
+#define _SC_SCI_H
+
+#include <asm/arch/sci/types.h>
+#include <asm/arch/sci/svc/misc/api.h>
+#include <asm/arch/sci/svc/pad/api.h>
+#include <asm/arch/sci/svc/pm/api.h>
+#include <asm/arch/sci/svc/rm/api.h>
+#include <asm/arch/sci/rpc.h>
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <linux/errno.h>
+
+static inline int sc_err_to_linux(sc_err_t err)
+{
+ int ret;
+
+ switch (err) {
+ case SC_ERR_NONE:
+ return 0;
+ case SC_ERR_VERSION:
+ case SC_ERR_CONFIG:
+ case SC_ERR_PARM:
+ ret = -EINVAL;
+ break;
+ case SC_ERR_NOACCESS:
+ case SC_ERR_LOCKED:
+ case SC_ERR_UNAVAILABLE:
+ ret = -EACCES;
+ break;
+ case SC_ERR_NOTFOUND:
+ case SC_ERR_NOPOWER:
+ ret = -ENODEV;
+ break;
+ case SC_ERR_IPC:
+ ret = -EIO;
+ break;
+ case SC_ERR_BUSY:
+ ret = -EBUSY;
+ break;
+ case SC_ERR_FAIL:
+ ret = -EIO;
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+
+ debug("%s %d %d\n", __func__, err, ret);
+
+ return ret;
+}
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_MISC_API_H
+#define SC_MISC_API_H
+
+/* Defines for sc_misc_boot_status_t */
+#define SC_MISC_BOOT_STATUS_SUCCESS 0U /* Success */
+#define SC_MISC_BOOT_STATUS_SECURITY 1U /* Security violation */
+
+/* Defines for sc_misc_seco_auth_cmd_t */
+#define SC_MISC_SECO_AUTH_SECO_FW 0U /* SECO Firmware */
+#define SC_MISC_SECO_AUTH_HDMI_TX_FW 1U /* HDMI TX Firmware */
+#define SC_MISC_SECO_AUTH_HDMI_RX_FW 2U /* HDMI RX Firmware */
+
+/* Defines for sc_misc_temp_t */
+#define SC_MISC_TEMP 0U /* Temp sensor */
+#define SC_MISC_TEMP_HIGH 1U /* Temp high alarm */
+#define SC_MISC_TEMP_LOW 2U /* Temp low alarm */
+
+/* Defines for sc_misc_seco_auth_cmd_t */
+#define SC_MISC_AUTH_CONTAINER 0U /* Authenticate container */
+#define SC_MISC_VERIFY_IMAGE 1U /* Verify image */
+#define SC_MISC_REL_CONTAINER 2U /* Release container */
+
+typedef u8 sc_misc_boot_status_t;
+
+#endif /* SC_MISC_API_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_PAD_API_H
+#define SC_PAD_API_H
+
+/* Defines for sc_pad_config_t */
+#define SC_PAD_CONFIG_NORMAL 0U /* Normal */
+#define SC_PAD_CONFIG_OD 1U /* Open Drain */
+#define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */
+#define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */
+
+/* Defines for sc_pad_iso_t */
+#define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */
+#define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */
+#define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */
+#define SC_PAD_ISO_ON 3U /* ISO latched data is held */
+
+/* Defines for sc_pad_28fdsoi_dse_t */
+#define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */
+#define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed for 1.8v */
+#define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */
+#define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength dual volt */
+#define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength dual volt */
+
+/* Defines for sc_pad_28fdsoi_ps_t */
+#define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */
+#define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */
+#define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */
+#define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */
+
+/* Defines for sc_pad_28fdsoi_pus_t */
+#define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */
+#define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */
+#define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */
+#define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */
+
+/* Defines for sc_pad_wakeup_t */
+#define SC_PAD_WAKEUP_OFF 0U /* Off */
+#define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */
+#define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */
+#define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */
+#define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */
+#define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */
+
+#endif /* SC_PAD_API_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_PM_API_H
+#define SC_PM_API_H
+
+/* Defines for sc_pm_power_mode_t */
+#define SC_PM_PW_MODE_OFF 0U /* Power off */
+#define SC_PM_PW_MODE_STBY 1U /* Power in standby */
+#define SC_PM_PW_MODE_LP 2U /* Power in low-power */
+#define SC_PM_PW_MODE_ON 3U /* Power on */
+
+/* Defines for sc_pm_clk_t */
+#define SC_PM_CLK_SLV_BUS 0U /* Slave bus clock */
+#define SC_PM_CLK_MST_BUS 1U /* Master bus clock */
+#define SC_PM_CLK_PER 2U /* Peripheral clock */
+#define SC_PM_CLK_PHY 3U /* Phy clock */
+#define SC_PM_CLK_MISC 4U /* Misc clock */
+#define SC_PM_CLK_MISC0 0U /* Misc 0 clock */
+#define SC_PM_CLK_MISC1 1U /* Misc 1 clock */
+#define SC_PM_CLK_MISC2 2U /* Misc 2 clock */
+#define SC_PM_CLK_MISC3 3U /* Misc 3 clock */
+#define SC_PM_CLK_MISC4 4U /* Misc 4 clock */
+#define SC_PM_CLK_CPU 2U /* CPU clock */
+#define SC_PM_CLK_PLL 4U /* PLL */
+#define SC_PM_CLK_BYPASS 4U /* Bypass clock */
+
+/* Defines for sc_pm_clk_mode_t */
+#define SC_PM_CLK_MODE_ROM_INIT 0U /* Clock is initialized by ROM. */
+#define SC_PM_CLK_MODE_OFF 1U /* Clock is disabled */
+#define SC_PM_CLK_MODE_ON 2U /* Clock is enabled. */
+#define SC_PM_CLK_MODE_AUTOGATE_SW 3U /* Clock is in SW autogate mode */
+#define SC_PM_CLK_MODE_AUTOGATE_HW 4U /* Clock is in HW autogate mode */
+#define SC_PM_CLK_MODE_AUTOGATE_SW_HW 5U /* Clock is in SW-HW autogate mode */
+
+typedef u8 sc_pm_power_mode_t;
+typedef u8 sc_pm_clk_t;
+typedef u8 sc_pm_clk_mode_t;
+typedef u8 sc_pm_clk_parent_t;
+typedef u32 sc_pm_clock_rate_t;
+
+#endif /* SC_PM_API_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_RM_API_H
+#define SC_RM_API_H
+
+#include <asm/arch/sci/types.h>
+
+/* Defines for type widths */
+#define SC_RM_PARTITION_W 5U /* Width of sc_rm_pt_t */
+#define SC_RM_MEMREG_W 6U /* Width of sc_rm_mr_t */
+#define SC_RM_DID_W 4U /* Width of sc_rm_did_t */
+#define SC_RM_SID_W 6U /* Width of sc_rm_sid_t */
+#define SC_RM_SPA_W 2U /* Width of sc_rm_spa_t */
+#define SC_RM_PERM_W 3U /* Width of sc_rm_perm_t */
+
+/* Defines for ALL parameters */
+#define SC_RM_PT_ALL ((sc_rm_pt_t)UINT8_MAX) /* All partitions */
+#define SC_RM_MR_ALL ((sc_rm_mr_t)UINT8_MAX) /* All memory regions */
+
+/* Defines for sc_rm_spa_t */
+#define SC_RM_SPA_PASSTHRU 0U /* Pass through (attribute driven by master) */
+#define SC_RM_SPA_PASSSID 1U /* Pass through and output on SID */
+#define SC_RM_SPA_ASSERT 2U /* Assert (force to be secure/privileged) */
+#define SC_RM_SPA_NEGATE 3U /* Negate (force to be non-secure/user) */
+
+/* Defines for sc_rm_perm_t */
+#define SC_RM_PERM_NONE 0U /* No access */
+#define SC_RM_PERM_SEC_R 1U /* Secure RO */
+#define SC_RM_PERM_SECPRIV_RW 2U /* Secure privilege R/W */
+#define SC_RM_PERM_SEC_RW 3U /* Secure R/W */
+#define SC_RM_PERM_NSPRIV_R 4U /* Secure R/W, non-secure privilege RO */
+#define SC_RM_PERM_NS_R 5U /* Secure R/W, non-secure RO */
+#define SC_RM_PERM_NSPRIV_RW 6U /* Secure R/W, non-secure privilege R/W */
+#define SC_RM_PERM_FULL 7U /* Full access */
+
+/* Types */
+
+/*!
+ * This type is used to declare a resource partition.
+ */
+typedef u8 sc_rm_pt_t;
+
+/*!
+ * This type is used to declare a memory region.
+ */
+typedef u8 sc_rm_mr_t;
+
+/*!
+ * This type is used to declare a resource domain ID used by the
+ * isolation HW.
+ */
+typedef u8 sc_rm_did_t;
+
+/*!
+ * This type is used to declare an SMMU StreamID.
+ */
+typedef u16 sc_rm_sid_t;
+
+/*!
+ * This type is a used to declare master transaction attributes.
+ */
+typedef u8 sc_rm_spa_t;
+
+typedef u8 sc_rm_perm_t;
+
+#endif /* SC_RM_API_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_TYPES_H
+#define SC_TYPES_H
+
+/* Includes */
+#include <linux/types.h>
+
+/* Defines */
+/*
+ * This type is used to declare a handle for an IPC communication
+ * channel. Its meaning is specific to the IPC implementation.
+ */
+typedef u64 sc_ipc_t;
+
+/* Defines for common frequencies */
+#define SC_32KHZ 32768U /* 32KHz */
+#define SC_10MHZ 10000000U /* 10MHz */
+#define SC_20MHZ 20000000U /* 20MHz */
+#define SC_25MHZ 25000000U /* 25MHz */
+#define SC_27MHZ 27000000U /* 27MHz */
+#define SC_40MHZ 40000000U /* 40MHz */
+#define SC_45MHZ 45000000U /* 45MHz */
+#define SC_50MHZ 50000000U /* 50MHz */
+#define SC_60MHZ 60000000U /* 60MHz */
+#define SC_66MHZ 66666666U /* 66MHz */
+#define SC_74MHZ 74250000U /* 74.25MHz */
+#define SC_80MHZ 80000000U /* 80MHz */
+#define SC_83MHZ 83333333U /* 83MHz */
+#define SC_84MHZ 84375000U /* 84.37MHz */
+#define SC_100MHZ 100000000U /* 100MHz */
+#define SC_125MHZ 125000000U /* 125MHz */
+#define SC_133MHZ 133333333U /* 133MHz */
+#define SC_135MHZ 135000000U /* 135MHz */
+#define SC_150MHZ 150000000U /* 150MHz */
+#define SC_160MHZ 160000000U /* 160MHz */
+#define SC_166MHZ 166666666U /* 166MHz */
+#define SC_175MHZ 175000000U /* 175MHz */
+#define SC_180MHZ 180000000U /* 180MHz */
+#define SC_200MHZ 200000000U /* 200MHz */
+#define SC_250MHZ 250000000U /* 250MHz */
+#define SC_266MHZ 266666666U /* 266MHz */
+#define SC_300MHZ 300000000U /* 300MHz */
+#define SC_312MHZ 312500000U /* 312.5MHZ */
+#define SC_320MHZ 320000000U /* 320MHz */
+#define SC_325MHZ 325000000U /* 325MHz */
+#define SC_333MHZ 333333333U /* 333MHz */
+#define SC_350MHZ 350000000U /* 350MHz */
+#define SC_372MHZ 372000000U /* 372MHz */
+#define SC_375MHZ 375000000U /* 375MHz */
+#define SC_400MHZ 400000000U /* 400MHz */
+#define SC_500MHZ 500000000U /* 500MHz */
+#define SC_594MHZ 594000000U /* 594MHz */
+#define SC_625MHZ 625000000U /* 625MHz */
+#define SC_640MHZ 640000000U /* 640MHz */
+#define SC_650MHZ 650000000U /* 650MHz */
+#define SC_667MHZ 666666667U /* 667MHz */
+#define SC_675MHZ 675000000U /* 675MHz */
+#define SC_700MHZ 700000000U /* 700MHz */
+#define SC_720MHZ 720000000U /* 720MHz */
+#define SC_750MHZ 750000000U /* 750MHz */
+#define SC_800MHZ 800000000U /* 800MHz */
+#define SC_850MHZ 850000000U /* 850MHz */
+#define SC_900MHZ 900000000U /* 900MHz */
+#define SC_1000MHZ 1000000000U /* 1GHz */
+#define SC_1060MHZ 1060000000U /* 1.06GHz */
+#define SC_1188MHZ 1188000000U /* 1.188GHz */
+#define SC_1260MHZ 1260000000U /* 1.26GHz */
+#define SC_1280MHZ 1280000000U /* 1.28GHz */
+#define SC_1300MHZ 1300000000U /* 1.3GHz */
+#define SC_1400MHZ 1400000000U /* 1.4GHz */
+#define SC_1500MHZ 1500000000U /* 1.5GHz */
+#define SC_1600MHZ 1600000000U /* 1.6GHz */
+#define SC_1800MHZ 1800000000U /* 1.8GHz */
+#define SC_2000MHZ 2000000000U /* 2.0GHz */
+#define SC_2112MHZ 2112000000U /* 2.12GHz */
+
+/* Defines for 24M related frequencies */
+#define SC_8MHZ 8000000U /* 8MHz */
+#define SC_12MHZ 12000000U /* 12MHz */
+#define SC_19MHZ 19800000U /* 19.8MHz */
+#define SC_24MHZ 24000000U /* 24MHz */
+#define SC_48MHZ 48000000U /* 48MHz */
+#define SC_120MHZ 120000000U /* 120MHz */
+#define SC_132MHZ 132000000U /* 132MHz */
+#define SC_144MHZ 144000000U /* 144MHz */
+#define SC_192MHZ 192000000U /* 192MHz */
+#define SC_211MHZ 211200000U /* 211.2MHz */
+#define SC_240MHZ 240000000U /* 240MHz */
+#define SC_264MHZ 264000000U /* 264MHz */
+#define SC_352MHZ 352000000U /* 352MHz */
+#define SC_360MHZ 360000000U /* 360MHz */
+#define SC_384MHZ 384000000U /* 384MHz */
+#define SC_396MHZ 396000000U /* 396MHz */
+#define SC_432MHZ 432000000U /* 432MHz */
+#define SC_480MHZ 480000000U /* 480MHz */
+#define SC_600MHZ 600000000U /* 600MHz */
+#define SC_744MHZ 744000000U /* 744MHz */
+#define SC_792MHZ 792000000U /* 792MHz */
+#define SC_864MHZ 864000000U /* 864MHz */
+#define SC_960MHZ 960000000U /* 960MHz */
+#define SC_1056MHZ 1056000000U /* 1056MHz */
+#define SC_1104MHZ 1104000000U /* 1104MHz */
+#define SC_1200MHZ 1200000000U /* 1.2GHz */
+#define SC_1464MHZ 1464000000U /* 1.464GHz */
+#define SC_2400MHZ 2400000000U /* 2.4GHz */
+
+/* Defines for A/V related frequencies */
+#define SC_62MHZ 62937500U /* 62.9375MHz */
+#define SC_755MHZ 755250000U /* 755.25MHz */
+
+/* Defines for type widths */
+#define SC_FADDR_W 36U /* Width of sc_faddr_t */
+#define SC_BOOL_W 1U /* Width of sc_bool_t */
+#define SC_ERR_W 4U /* Width of sc_err_t */
+#define SC_RSRC_W 10U /* Width of sc_rsrc_t */
+#define SC_CTRL_W 6U /* Width of sc_ctrl_t */
+
+/* Defines for sc_bool_t */
+#define SC_FALSE ((sc_bool_t)0U)
+#define SC_TRUE ((sc_bool_t)1U)
+
+/* Defines for sc_err_t */
+#define SC_ERR_NONE 0U /* Success */
+#define SC_ERR_VERSION 1U /* Incompatible API version */
+#define SC_ERR_CONFIG 2U /* Configuration error */
+#define SC_ERR_PARM 3U /* Bad parameter */
+#define SC_ERR_NOACCESS 4U /* Permission error (no access) */
+#define SC_ERR_LOCKED 5U /* Permission error (locked) */
+#define SC_ERR_UNAVAILABLE 6U /* Unavailable (out of resources) */
+#define SC_ERR_NOTFOUND 7U /* Not found */
+#define SC_ERR_NOPOWER 8U /* No power */
+#define SC_ERR_IPC 9U /* Generic IPC error */
+#define SC_ERR_BUSY 10U /* Resource is currently busy/active */
+#define SC_ERR_FAIL 11U /* General I/O failure */
+#define SC_ERR_LAST 12U
+
+/* Defines for sc_ctrl_t. */
+#define SC_C_TEMP 0U
+#define SC_C_TEMP_HI 1U
+#define SC_C_TEMP_LOW 2U
+#define SC_C_PXL_LINK_MST1_ADDR 3U
+#define SC_C_PXL_LINK_MST2_ADDR 4U
+#define SC_C_PXL_LINK_MST_ENB 5U
+#define SC_C_PXL_LINK_MST1_ENB 6U
+#define SC_C_PXL_LINK_MST2_ENB 7U
+#define SC_C_PXL_LINK_SLV1_ADDR 8U
+#define SC_C_PXL_LINK_SLV2_ADDR 9U
+#define SC_C_PXL_LINK_MST_VLD 10U
+#define SC_C_PXL_LINK_MST1_VLD 11U
+#define SC_C_PXL_LINK_MST2_VLD 12U
+#define SC_C_SINGLE_MODE 13U
+#define SC_C_ID 14U
+#define SC_C_PXL_CLK_POLARITY 15U
+#define SC_C_LINESTATE 16U
+#define SC_C_PCIE_G_RST 17U
+#define SC_C_PCIE_BUTTON_RST 18U
+#define SC_C_PCIE_PERST 19U
+#define SC_C_PHY_RESET 20U
+#define SC_C_PXL_LINK_RATE_CORRECTION 21U
+#define SC_C_PANIC 22U
+#define SC_C_PRIORITY_GROUP 23U
+#define SC_C_TXCLK 24U
+#define SC_C_CLKDIV 25U
+#define SC_C_DISABLE_50 26U
+#define SC_C_DISABLE_125 27U
+#define SC_C_SEL_125 28U
+#define SC_C_MODE 29U
+#define SC_C_SYNC_CTRL0 30U
+#define SC_C_KACHUNK_CNT 31U
+#define SC_C_KACHUNK_SEL 32U
+#define SC_C_SYNC_CTRL1 33U
+#define SC_C_DPI_RESET 34U
+#define SC_C_MIPI_RESET 35U
+#define SC_C_DUAL_MODE 36U
+#define SC_C_VOLTAGE 37U
+#define SC_C_PXL_LINK_SEL 38U
+#define SC_C_OFS_SEL 39U
+#define SC_C_OFS_AUDIO 40U
+#define SC_C_OFS_PERIPH 41U
+#define SC_C_OFS_IRQ 42U
+#define SC_C_RST0 43U
+#define SC_C_RST1 44U
+#define SC_C_SEL0 45U
+#define SC_C_LAST 46U
+
+#define SC_P_ALL ((sc_pad_t)UINT16_MAX) /* All pads */
+
+/* Types */
+
+/* This type is used to store a boolean */
+typedef u8 sc_bool_t;
+
+/* This type is used to store a system (full-size) address. */
+typedef u64 sc_faddr_t;
+
+/* This type is used to indicate error response for most functions. */
+typedef u8 sc_err_t;
+
+/*
+ * This type is used to indicate a resource. Resources include peripherals
+ * and bus masters (but not memory regions). Note items from list should
+ * never be changed or removed (only added to at the end of the list).
+ */
+typedef u16 sc_rsrc_t;
+
+/* This type is used to indicate a control. */
+typedef u8 sc_ctrl_t;
+
+/*
+ * This type is used to indicate a pad. Valid values are SoC specific.
+ *
+ * Refer to the SoC [Pad List](@ref PADS) for valid pad values.
+ */
+typedef u16 sc_pad_t;
+
+#endif /* SC_TYPES_H */
projects / u-boot.git / commitdiff