mx6boards: convert to DM_I2C and DM_SERIAL

Rework to remove use of legacy I2C API. Also switch
to DM_SERIAL to avoid board removal warning.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Eric Bénard <eric@eukrea.com>

diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
index 896350140d61c64cab5db1eb71092d94975d6c1e..cf3368c253bef8912c366eeacb17ab8c22c413e2 100644 (file)
--- a/board/embest/mx6boards/mx6boards.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -25,7 +25,6 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/spi.h>
 #include <asm/mach-imx/video.h>
 #include <i2c.h>
@@ -61,10 +60,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ENET_PAD_CTRL_CLK  ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
        PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
-#define I2C_PAD_CTRL   (PAD_CTL_PUS_100K_UP |                  \
-       PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
-       PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
                      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
@@ -148,57 +143,6 @@ static void setup_spi(void)
 }
 #endif
 
-struct i2c_pads_info i2c_pad_info1 = {
-       .scl = {
-               .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gp = IMX_GPIO_NR(5, 27)
-       },
-       .sda = {
-               .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gp = IMX_GPIO_NR(5, 26)
-       }
-};
-
-struct i2c_pads_info i2c_pad_info2 = {
-       .scl = {
-               .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gp = IMX_GPIO_NR(4, 12)
-       },
-       .sda = {
-               .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gp = IMX_GPIO_NR(4, 13)
-       }
-};
-
-struct i2c_pads_info i2c_pad_info3 = {
-       .scl = {
-               .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gp = IMX_GPIO_NR(1, 5)
-       },
-       .sda = {
-               .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06
-                               | MUX_PAD_CTRL(I2C_PAD_CTRL),
-               .gp = IMX_GPIO_NR(1, 6)
-       }
-};
-
 iomux_v3_cfg_t const tft_pads_riot[] = {
        /* LCD_PWR_EN */
        MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -258,8 +202,11 @@ static void do_enable_hdmi(struct display_info_t const *dev)
 
 static int detect_i2c(struct display_info_t const *dev)
 {
-       return (0 == i2c_set_bus_num(dev->bus)) &&
-               (0 == i2c_probe(dev->addr));
+       struct udevice *udev = NULL;
+       int ret;
+
+       ret = i2c_get_chip_for_busnum(dev->bus, dev->addr, 1, &udev);
+       return ret ? 0 : 1;
 }
 
 struct display_info_t const displays[] = {{
@@ -400,12 +347,7 @@ int board_init(void)
 {
        /* address of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-       /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */
-       setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-       /* i2c2 : HDMI EDID */
-       setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-       /* i2c3 : LVDS, Expansion connector */
-       setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
+
 #ifdef CONFIG_MXC_SPI
        setup_spi();
 #endif

diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig
index 8325aaa1c9d640e300168dfd7c747d99e423d7c8..198fec2cb2c4bdf5c1b0a52bedfad509156c2418 100644 (file)
--- a/configs/marsboard_defconfig
+++ b/configs/marsboard_defconfig
@@ -10,9 +10,6 @@ CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_IMX_CONFIG="board/boundary/nitrogen6x/nitrogen6q.cfg"
 CONFIG_MX6Q=y
 CONFIG_TARGET_EMBESTMX6BOARDS=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-marsboard"
 CONFIG_DISTRO_DEFAULTS=y
@@ -37,7 +34,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ARP_TIMEOUT=200
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_USDHC=y
@@ -50,6 +47,7 @@ CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y

diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index 1b303e738bbf947d8b8c8d66ec5eeeec72620ff6..a1e806be421b5ea435adb436e2ca42eb25af221d 100644 (file)
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@@ -12,9 +12,6 @@ CONFIG_ENV_OFFSET=0x60000
 CONFIG_IMX_CONFIG="board/boundary/nitrogen6x/nitrogen6s1g.cfg"
 CONFIG_MX6S=y
 CONFIG_TARGET_EMBESTMX6BOARDS=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6dl-riotboard"
 CONFIG_SPL_TEXT_BASE=0x00908000
@@ -53,7 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=2
 CONFIG_ARP_TIMEOUT=200
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
@@ -67,6 +64,7 @@ CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y