+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f (void)
-{
- /*
- * set clock frequency:
- * VERSATILE_REFCLK is 32KHz
- * VERSATILE_TIMCLK is 1MHz
- */
- *(volatile unsigned int *)(VERSATILE_SCTL_BASE) |=
- ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
-
- return 0;
-}
-
-int board_init (void)
-{
- /* arch number of Versatile Board */
-#ifdef CONFIG_ARCH_VERSATILE_AB
- gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_AB;
-#else
- gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB;
-#endif
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- gd->flags = 0;
-
- icache_enable ();
-
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- setenv("verify", "n");
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- * Configuration for Versatile PB.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */
-#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
-
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-
-#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */
-#define CONFIG_SYS_TIMER_RATE (1000000 / 256)
-#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-
-/*
- * control registers
- */
-#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK 0
-#define VERSATILE_TIMCLK 1
-
-#define VERSATILE_TIMER1_EnSel 15
-#define VERSATILE_TIMER2_EnSel 17
-#define VERSATILE_TIMER3_EnSel 19
-#define VERSATILE_TIMER4_EnSel 21
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE 8192
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE 0x10010000
-#undef CONFIG_SMC91111_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS \
- {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_CONS_INDEX 0
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_SERIAL0 0x101F1000
-#define CONFIG_SYS_SERIAL1 0x101F2000
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\
- "netdev=25,0,0xf1010000,0xf1010010,eth0 "\
- "console=ttyAMA0,38400n1"
-
-/*
- * Static configuration when assigning fixed address
- */
-#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Monitor Command Prompt */
-#undef CONFIG_SYS_PROMPT
-#ifdef CONFIG_ARCH_VERSATILE_AB
-# define CONFIG_SYS_PROMPT "VersatileAB # "
-#else
-# define CONFIG_SYS_PROMPT "VersatilePB # "
-#endif
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00800000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#ifdef CONFIG_ARCH_VERSATILE_QEMU
-#define CONFIG_SYS_TEXT_BASE 0x10000
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_MONITOR_LEN 0x80000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-/*
- * Use the CFI flash driver for ease of use
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_ENV_IS_IN_FLASH 1
-/*
- * System control register
- */
-#define VERSATILE_SYS_BASE 0x10000000
-#define VERSATILE_SYS_FLASH_OFFSET 0x4C
-#define VERSATILE_FLASHCTRL \
- (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-/* Enable writing to flash */
-#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0)
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/*
- * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block
- * i.e.
- * the bottom "sector" (bottom boot), or top "sector"
- * (top boot), is a seperate erase region divided into
- * 4 (equal) smaller sectors. This, notionally, allows
- * quicker erase/rewrire of the most frequently changed
- * area......
- * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4
- */
-
-#ifdef CONFIG_ARCH_VERSATILE_AB
-#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE)
-#define CONFIG_SYS_MAX_FLASH_SECT (520)
-#endif
-
-#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
-#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
-#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT (260)
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0x34000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE)
-
-/* The ARM Boot Monitor is shipped in the lowest sector of flash */
-
-#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE)
-#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
-#endif
-
-#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff