binary which loads before U-Boot proper, typically into on-chip SRAM. It is
responsible for locating, loading and jumping to U-Boot. Note that SPL is
not relocatable so must be loaded to the correct address in SRAM, or written
-to run from the correct address is direct flash execution is possible (e.g.
+to run from the correct address if direct flash execution is possible (e.g.
on x86 devices).
SPL can access binman symbols at runtime. See:
+Entry: u-boot-tpl: U-Boot TPL binary
+------------------------------------
+
+Properties / Entry arguments:
+ - filename: Filename of u-boot-tpl.bin (default 'tpl/u-boot-tpl.bin')
+
+This is the U-Boot TPL (Tertiary Program Loader) binary. This is a small
+binary which loads before SPL, typically into on-chip SRAM. It is
+responsible for locating, loading and jumping to SPL, the next-stage
+loader. Note that SPL is not relocatable so must be loaded to the correct
+address in SRAM, or written to run from the correct address if direct
+flash execution is possible (e.g. on x86 devices).
+
+SPL can access binman symbols at runtime. See:
+
+ 'Access to binman entry offsets at run time (symbols)'
+
+in the binman README for more information.
+
+The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since
+binman uses that to look up symbols to write into the TPL binary.
+
+
+
+Entry: u-boot-tpl-dtb: U-Boot TPL device tree
+---------------------------------------------
+
+Properties / Entry arguments:
+ - filename: Filename of u-boot.dtb (default 'tpl/u-boot-tpl.dtb')
+
+This is the TPL device tree, containing configuration information for
+TPL. TPL needs this to know what devices are present and which drivers
+to activate.
+
+
+
Entry: u-boot-ucode: U-Boot microcode block
-------------------------------------------
binary which loads before U-Boot proper, typically into on-chip SRAM. It is
responsible for locating, loading and jumping to U-Boot. Note that SPL is
not relocatable so must be loaded to the correct address in SRAM, or written
- to run from the correct address is direct flash execution is possible (e.g.
+ to run from the correct address if direct flash execution is possible (e.g.
on x86 devices).
SPL can access binman symbols at runtime. See:
# Copyright (c) 2016 Google, Inc
# Written by Simon Glass <sjg@chromium.org>
#
-# Entry-type module for U-Boot device tree
+# Entry-type module for U-Boot device tree in SPL (Secondary Program Loader)
#
from entry import Entry
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for tpl/u-boot-tpl.bin
+#
+
+import elf
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot_tpl(Entry_blob):
+ """U-Boot TPL binary
+
+ Properties / Entry arguments:
+ - filename: Filename of u-boot-tpl.bin (default 'tpl/u-boot-tpl.bin')
+
+ This is the U-Boot TPL (Tertiary Program Loader) binary. This is a small
+ binary which loads before SPL, typically into on-chip SRAM. It is
+ responsible for locating, loading and jumping to SPL, the next-stage
+ loader. Note that SPL is not relocatable so must be loaded to the correct
+ address in SRAM, or written to run from the correct address if direct
+ flash execution is possible (e.g. on x86 devices).
+
+ SPL can access binman symbols at runtime. See:
+
+ 'Access to binman entry offsets at run time (symbols)'
+
+ in the binman README for more information.
+
+ The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since
+ binman uses that to look up symbols to write into the TPL binary.
+ """
+ def __init__(self, section, etype, node):
+ Entry_blob.__init__(self, section, etype, node)
+ self.elf_fname = 'tpl/u-boot-tpl'
+
+ def GetDefaultFilename(self):
+ return 'tpl/u-boot-tpl.bin'
+
+ def WriteSymbols(self, section):
+ elf.LookupAndWriteSymbols(self.elf_fname, self, section)
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2018 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for U-Boot device tree in TPL (Tertiary Program Loader)
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_u_boot_tpl_dtb(Entry_blob):
+ """U-Boot TPL device tree
+
+ Properties / Entry arguments:
+ - filename: Filename of u-boot.dtb (default 'tpl/u-boot-tpl.dtb')
+
+ This is the TPL device tree, containing configuration information for
+ TPL. TPL needs this to know what devices are present and which drivers
+ to activate.
+ """
+ def __init__(self, section, etype, node):
+ Entry_blob.__init__(self, section, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'tpl/u-boot-tpl.dtb'
U_BOOT_DATA = '1234'
U_BOOT_IMG_DATA = 'img'
U_BOOT_SPL_DATA = '56780123456789abcde'
+U_BOOT_TPL_DATA = 'tpl'
BLOB_DATA = '89'
ME_DATA = '0abcd'
VGA_DATA = 'vga'
U_BOOT_DTB_DATA = 'udtb'
U_BOOT_SPL_DTB_DATA = 'spldtb'
+U_BOOT_TPL_DTB_DATA = 'tpldtb'
X86_START16_DATA = 'start16'
X86_START16_SPL_DATA = 'start16spl'
U_BOOT_NODTB_DATA = 'nodtb with microcode pointer somewhere in here'
TestFunctional._MakeInputFile('u-boot.bin', U_BOOT_DATA)
TestFunctional._MakeInputFile('u-boot.img', U_BOOT_IMG_DATA)
TestFunctional._MakeInputFile('spl/u-boot-spl.bin', U_BOOT_SPL_DATA)
+ TestFunctional._MakeInputFile('tpl/u-boot-tpl.bin', U_BOOT_TPL_DATA)
TestFunctional._MakeInputFile('blobfile', BLOB_DATA)
TestFunctional._MakeInputFile('me.bin', ME_DATA)
TestFunctional._MakeInputFile('vga.bin', VGA_DATA)
- TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
- TestFunctional._MakeInputFile('spl/u-boot-spl.dtb', U_BOOT_SPL_DTB_DATA)
+ self._ResetDtbs()
TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA)
TestFunctional._MakeInputFile('spl/u-boot-x86-16bit-spl.bin',
X86_START16_SPL_DATA)
"""Remove the temporary output directory"""
tools._FinaliseForTest()
+ @classmethod
+ def _ResetDtbs(self):
+ TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
+ TestFunctional._MakeInputFile('spl/u-boot-spl.dtb', U_BOOT_SPL_DTB_DATA)
+ TestFunctional._MakeInputFile('tpl/u-boot-tpl.dtb', U_BOOT_TPL_DTB_DATA)
+
def _RunBinman(self, *args, **kwargs):
"""Run binman using the command line
finally:
# Put the test file back
if use_real_dtb:
- TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
+ self._ResetDtbs()
def _DoReadFile(self, fname, use_real_dtb=False):
"""Helper function which discards the device-tree binary
self.assertIn("Node '/binman/vblock': Cannot find entry for node "
"'other'", str(e.exception))
+ def testTpl(self):
+ """Test that an image with TPL and ots device tree can be created"""
+ # ELF file with a '__bss_size' symbol
+ with open(self.TestFile('bss_data')) as fd:
+ TestFunctional._MakeInputFile('tpl/u-boot-tpl', fd.read())
+ data = self._DoReadFile('78_u_boot_tpl.dts')
+ self.assertEqual(U_BOOT_TPL_DATA + U_BOOT_TPL_DTB_DATA, data)
+
if __name__ == "__main__":
unittest.main()
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+/ {
+ binman {
+ u-boot-tpl {
+ };
+ u-boot-tpl-dtb {
+ };
+ };
+};
projects / u-boot.git / commitdiff