Currently, Marvell Armada8k development board use 3 different
defconfigs:
mvebu_db-
88f7040-nand_defconfig
mvebu_db-88f7040_defconfig
mvebu_db-88f8040_defconfig
Having 3 different defconfigs makes maintenance difficult.
This patch removes the defconfigs mentioned above and introduce
a new defconfig which represents the Armada8k family.
NOTE:
In order not to break automatic tools compilation,
a default device-tree is set in the defconfig (armada-8040-db).
However, when compiling u-boot, the user MUST explicitly export
the DEVICE_TREE for the requested board because using A80x0
device-tree on A70x0 might break the device.
For more information, refer to "doc/README.marvell" (intoduced
in this patch).
Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_MVEBU_ARMADA_8K=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db-nand"
-CONFIG_SMBIOS_PRODUCT_NAME=""
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_EARLY_INIT_R=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_MVEBU_BUBT=y
-CONFIG_MVEBU_NAND_BOOT=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MAC_PARTITION=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_BLOCK_CACHE=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_NAND_PXA3XX=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_PCIE_DW_MVEBU=y
-CONFIG_MVEBU_COMPHY_SUPPORT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_8K=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_DEBUG_UART_BASE=0xf0512000
-CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_SMBIOS_MANUFACTURER=""
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_MVEBU_ARMADA_8K=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db"
-CONFIG_SMBIOS_PRODUCT_NAME=""
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_EARLY_INIT_R=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_MVEBU_BUBT=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MAC_PARTITION=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_BLOCK_CACHE=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_MVPP2=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_PCIE_DW_MVEBU=y
-CONFIG_MVEBU_COMPHY_SUPPORT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_8K=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_DEBUG_UART_BASE=0xf0512000
-CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_SMBIOS_MANUFACTURER=""
--- /dev/null
+Marvell U-Boot Build Instructions
+=================================
+
+This document describes how to compile the U-Boot and how to change U-Boot configuration
+
+Build Procedure
+----------------
+1. Install required packages:
+
+ # sudo apt-get install libssl-dev
+ # sudo apt-get install device-tree-compiler
+ # sudo apt-get install swig libpython-dev
+
+2. Set the cross compiler:
+
+ # export CROSS_COMPILE=/path/to/toolchain/aarch64-marvell-linux-gnu-
+
+3. Clean-up old residuals:
+
+ # make mrproper
+
+4. Configure the U-Boot:
+
+ # make <defconfig_file>
+
+ - For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
+ - For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
+ - For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
+ - For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
+
+5. Configure the device-tree and build the U-Boot image:
+
+ Compile u-boot and set the required device-tree using:
+
+ # make DEVICE_TREE=<name>
+
+ NOTE:
+ Compilation with "mvebu_db_armada8k_defconfig" requires explicitly exporting DEVICE_TREE
+ for the requested board.
+ By default, u-boot is compiled with armada-8040-db device-tree.
+ Using A80x0 device-tree on A70x0 might break the device.
+ In order to prevent this, the required device-tree MUST be set during compilation.
+ All device-tree files are located in ./arch/arm/dts/ folder.
+
+ NOTE:
+ The u-boot.bin should not be used as a stand-alone image.
+ The ARM Trusted Firmware (ATF) build process uses this image to generate the
+ flash image.
+
+Configuration update
+---------------------
+ To update the U-Boot configuration, please refer to doc/README.kconfig
+
projects / u-boot.git / commitdiff