MIPS: make inclusion of ROM exception vectors configurable

This adds a compile time option to include code for static
exception vectors. Static exception vectors are only needed,
when the U-Boot entry point is equal to the CPU reset exception
vector address. For instance this is the case when U-Boot is
used as ROM in Qemu or booted from parallel NOR flash. When
U-Boot is booted from RAM (e.g. loaded there by SPL), the
exception vectors need to be setup dynamically, which is done
in follow-up commits.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 097ad587c1cf643c769b7c071d27615b48578da9..709ac5c0b3454cd67bc3933cefc594bbb849bc8d 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -20,6 +20,7 @@ config TARGET_QEMU_MIPS
        select SUPPORTS_CPU_MIPS32_R2
        select SUPPORTS_CPU_MIPS64_R1
        select SUPPORTS_CPU_MIPS64_R2
+       select ROM_EXCEPTION_VECTORS
 
 config TARGET_MALTA
        bool "Support malta"
@@ -40,6 +41,7 @@ config TARGET_MALTA
        select SUPPORTS_CPU_MIPS64_R6
        select SWAP_IO_SPACE
        select MIPS_L1_CACHE_SHIFT_6
+       select ROM_EXCEPTION_VECTORS
 
 config TARGET_VCT
        bool "Support vct"
@@ -47,6 +49,7 @@ config TARGET_VCT
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
        select SYS_MIPS_CACHE_INIT_RAM_LOAD
+       select ROM_EXCEPTION_VECTORS
 
 config TARGET_DBAU1X00
        bool "Support dbau1x00"
@@ -55,6 +58,7 @@ config TARGET_DBAU1X00
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
        select SYS_MIPS_CACHE_INIT_RAM_LOAD
+       select ROM_EXCEPTION_VECTORS
        select MIPS_TUNE_4KC
 
 config TARGET_PB1X00
@@ -63,6 +67,7 @@ config TARGET_PB1X00
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
        select SYS_MIPS_CACHE_INIT_RAM_LOAD
+       select ROM_EXCEPTION_VECTORS
        select MIPS_TUNE_4KC
 
 config ARCH_ATH79
@@ -91,6 +96,7 @@ config TARGET_BOSTON
        select SUPPORTS_CPU_MIPS64_R1
        select SUPPORTS_CPU_MIPS64_R2
        select SUPPORTS_CPU_MIPS64_R6
+       select ROM_EXCEPTION_VECTORS
 
 config TARGET_XILFPGA
        bool "Support Imagination Xilfpga"
@@ -103,6 +109,7 @@ config TARGET_XILFPGA
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
        select MIPS_L1_CACHE_SHIFT_4
+       select ROM_EXCEPTION_VECTORS
        help
          This supports IMGTEC MIPSfpga platform
 
@@ -192,6 +199,20 @@ config CPU_MIPS64_R6
 
 endchoice
 
+menu "General setup"
+
+config ROM_EXCEPTION_VECTORS
+       bool "Build U-Boot image with exception vectors"
+       help
+         Enable this to include exception vectors in the U-Boot image. This is
+         required if the U-Boot entry point is equal to the address of the
+         CPU reset exception vector (e.g. U-Boot as ROM loader in Qemu,
+         U-Boot booted from parallel NOR flash).
+         Disable this, if the U-Boot image is booted from DRAM (e.g. by SPL).
+         In that case the image size will be reduced by 0x500 bytes.
+
+endmenu
+
 menu "OS boot interface"
 
 config MIPS_BOOT_CMDLINE_LEGACY

diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index 3f0fc125475271835456db3490bd47a61a3dbb1b..108d2df38adb104cfef652353c70097471191fcd 100644 (file)
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -57,7 +57,6 @@ ENTRY(_start)
        b       reset
         nop
 
-       .org 0x10
 #if defined(CONFIG_SYS_XWAY_EBU_BOOTCFG)
        /*
         * Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to
@@ -66,16 +65,20 @@ ENTRY(_start)
         * initial configuration for that EBU in order to access the flash
         * device with correct parameters. This config option is board-specific.
         */
+       .org 0x10
        .word CONFIG_SYS_XWAY_EBU_BOOTCFG
        .word 0x0
-#elif defined(CONFIG_MALTA)
+#endif
+#if defined(CONFIG_MALTA)
        /*
         * Linux expects the Board ID here.
         */
+       .org 0x10
        .word 0x00000420        # 0x420 (Malta Board with CoreLV)
        .word 0x00000000
 #endif
 
+#if defined(CONFIG_ROM_EXCEPTION_VECTORS)
        .org 0x200
        /* TLB refill, 32 bit task */
 1:     b       1b
@@ -106,7 +109,9 @@ ENTRY(_start)
 1:     b       1b
         nop
 
-       .align 4
+       .org 0x500
+#endif
+
 reset:
 #if __mips_isa_rev >= 6
        mfc0    t0, CP0_CONFIG, 5

diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index 7d483aa8dce398754df81efdba157d69e179cb75..d982b0f8e6978128d8950d6744a143b891b6a05d 100644 (file)
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -9,6 +9,7 @@ config SOC_AR933X
        select SUPPORTS_BIG_ENDIAN
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
+       select ROM_EXCEPTION_VECTORS
        select MIPS_TUNE_24KC
        help
          This supports QCA/Atheros ar933x family SOCs.
@@ -27,6 +28,7 @@ config SOC_QCA953X
        select SUPPORTS_BIG_ENDIAN
        select SUPPORTS_CPU_MIPS32_R1
        select SUPPORTS_CPU_MIPS32_R2
+       select ROM_EXCEPTION_VECTORS
        select MIPS_TUNE_24KC
        help
          This supports QCA/Atheros qca953x family SOCs.

diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
index 2e38bb7ecafa84cdd1659f73c28e99d1ddee21cf..8fad4cff9126ab117479e70e7f55716c0dda812d 100644 (file)
--- a/arch/mips/mach-pic32/Kconfig
+++ b/arch/mips/mach-pic32/Kconfig
@@ -14,6 +14,7 @@ config SOC_PIC32MZDA
        select SUPPORTS_CPU_MIPS32_R2
        select MIPS_L1_CACHE_SHIFT_4
        select SYS_MIPS_CACHE_INIT_RAM_LOAD
+       select ROM_EXCEPTION_VECTORS
        help
          This supports Microchip PIC32MZ[DA] family of microcontrollers.