i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support

This patch fixes a few issues noticed, when testing this new driver on
ARM Octeon TX2 again. Here the details:

- Remove "common.h" header inclusion
- Use correct THP define on Octeon TX2
- Octeon TX2 uses the same compatible as Octeon TX. We can't distinguish
  both platforms this way. Remove the unused "cavium,thunder2-99xx-twsi"
  compatible and add a check to the Octeon TX2 specific
  "cavium,thunderx-i2c" so that the correct driver data is selected.
- Removed "struct pci_device_id" definition and U_BOOT_PCI_DEVICE()
  as its not needed for the PCI based probing on Octeon TX2

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Suneel Garapati <sgarapati@marvell.com>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

diff --git a/drivers/i2c/octeon_i2c.c b/drivers/i2c/octeon_i2c.c
index c11d6ff93d17fa0799da8774506fdf18ca501756..23dcb1563ea56f546c2f3cb9f02fa65199dd1820 100644 (file)
--- a/drivers/i2c/octeon_i2c.c
+++ b/drivers/i2c/octeon_i2c.c
@@ -3,11 +3,10 @@
  * Copyright (C) 2018 Marvell International Ltd.
  */
 
-#include <common.h>
 #include <clk.h>
 #include <dm.h>
 #include <i2c.h>
-#include <pci_ids.h>
+#include <time.h>
 #include <asm/io.h>
 #include <linux/bitfield.h>
 #include <linux/compat.h>
@@ -749,6 +748,27 @@ static int octeon_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
        return 0;
 }
 
+static const struct octeon_i2c_data i2c_octeon_data = {
+       .probe = PROBE_DT,
+       .reg_offs = 0x0000,
+       .thp = 3,
+       .clk_method = CLK_METHOD_OCTEON,
+};
+
+static const struct octeon_i2c_data i2c_octeontx_data = {
+       .probe = PROBE_PCI,
+       .reg_offs = 0x1000,
+       .thp = 24,
+       .clk_method = CLK_METHOD_OCTEON,
+};
+
+static const struct octeon_i2c_data i2c_octeontx2_data = {
+       .probe = PROBE_PCI,
+       .reg_offs = 0x1000,
+       .thp = 3,
+       .clk_method = CLK_METHOD_OCTEONTX2,
+};
+
 /**
  * Driver probe function
  *
@@ -761,6 +781,10 @@ static int octeon_i2c_probe(struct udevice *dev)
        u32 i2c_slave_addr;
        int ret;
 
+       /* Octeon TX2 needs a different data struct */
+       if (device_is_compatible(dev, "cavium,thunderx-i2c"))
+               dev->driver_data = (long)&i2c_octeontx2_data;
+
        twsi->data = (const struct octeon_i2c_data *)dev_get_driver_data(dev);
 
        if (twsi->data->probe == PROBE_PCI) {
@@ -798,34 +822,11 @@ static const struct dm_i2c_ops octeon_i2c_ops = {
        .set_bus_speed  = octeon_i2c_set_bus_speed,
 };
 
-static const struct octeon_i2c_data i2c_octeon_data = {
-       .probe = PROBE_DT,
-       .reg_offs = 0x0000,
-       .thp = 3,
-       .clk_method = CLK_METHOD_OCTEON,
-};
-
-static const struct octeon_i2c_data i2c_octeontx_data = {
-       .probe = PROBE_PCI,
-       .reg_offs = 0x8000,
-       .thp = 3,
-       .clk_method = CLK_METHOD_OCTEON,
-};
-
-static const struct octeon_i2c_data i2c_octeontx2_data = {
-       .probe = PROBE_PCI,
-       .reg_offs = 0x8000,
-       .thp = 24,
-       .clk_method = CLK_METHOD_OCTEONTX2,
-};
-
 static const struct udevice_id octeon_i2c_ids[] = {
        { .compatible = "cavium,octeon-7890-twsi",
          .data = (ulong)&i2c_octeon_data },
        { .compatible = "cavium,thunder-8890-twsi",
          .data = (ulong)&i2c_octeontx_data },
-       { .compatible = "cavium,thunder2-99xx-twsi",
-         .data = (ulong)&i2c_octeontx2_data },
        { }
 };
 
@@ -837,11 +838,3 @@ U_BOOT_DRIVER(octeon_pci_twsi) = {
        .priv_auto_alloc_size = sizeof(struct octeon_twsi),
        .ops    = &octeon_i2c_ops,
 };
-
-static struct pci_device_id octeon_twsi_supported[] = {
-       { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_TWSI),
-         .driver_data = (ulong)&i2c_octeontx2_data },
-       { },
-};
-
-U_BOOT_PCI_DEVICE(octeon_pci_twsi, octeon_twsi_supported);