]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
clk: zynqmp: Add support for CCF driver
authorSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Fri, 3 Feb 2017 18:26:49 +0000 (23:56 +0530)
committerMichal Simek <michal.simek@xilinx.com>
Wed, 2 Aug 2017 07:11:52 +0000 (09:11 +0200)
Add support for CCF, this CCF reads the ref clocks
from dt and checks all the required clock control
registers for its source , divisors and calculates
the clock from them. This supports clock and set
functions.

Panic when read/write fails.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
drivers/clk/clk_zynqmp.c

index 50eaf3161383c2821f3c20467b35d12e7ac8b346..247b55e8506c567ace38203f8d71cc47cf7c8195 100644 (file)
 #include <linux/bitops.h>
 #include <clk-uclass.h>
 #include <clk.h>
+#include <asm/arch/sys_proto.h>
 #include <dm.h>
 
-#define ZYNQMP_GEM0_REF_CTRL           0xFF5E0050
-#define ZYNQMP_IOPLL_CTRL              0xFF5E0020
-#define ZYNQMP_RPLL_CTRL               0xFF5E0030
-#define ZYNQMP_DPLL_CTRL               0xFD1A002C
-#define ZYNQMP_SIP_SVC_MMIO_WRITE      0xC2000013
-#define ZYNQMP_SIP_SVC_MMIO_WRITE      0xC2000013
-#define ZYNQMP_SIP_SVC_MMIO_WRITE      0xC2000013
-#define ZYNQMP_SIP_SVC_MMIO_READ       0xC2000014
-#define ZYNQMP_DIV_MAX_VAL             0x3F
-#define ZYNQMP_DIV1_SHFT               8
-#define ZYNQMP_DIV1_SHFT               8
-#define ZYNQMP_DIV2_SHFT               16
-#define ZYNQMP_DIV_MASK                        0x3F
-#define ZYNQMP_PLL_CTRL_FBDIV_MASK     0x7F
-#define ZYNQMP_PLL_CTRL_FBDIV_SHFT     8
-#define ZYNQMP_GEM_REF_CTRL_SRC_MASK   0x7
-#define ZYNQMP_GEM0_CLK_ID             45
-#define ZYNQMP_GEM1_CLK_ID             46
-#define ZYNQMP_GEM2_CLK_ID             47
-#define ZYNQMP_GEM3_CLK_ID             48
-
-static unsigned long pss_ref_clk;
-
-static int zynqmp_calculate_divisors(unsigned long req_rate,
-                                    unsigned long parent_rate,
-                                    u32 *div1, u32 *div2)
-{
-       u32 req_div = 1;
-       u32 i;
-
-       /*
-        * calculate two divisors to get
-        * required rate and each divisor
-        * should be less than 63
-        */
-       req_div = DIV_ROUND_UP(parent_rate, req_rate);
-
-       for (i = 1; i <= req_div; i++) {
-               if ((req_div % i) == 0) {
-                       *div1 = req_div / i;
-                       *div2 = i;
-                       if ((*div1 < ZYNQMP_DIV_MAX_VAL) &&
-                           (*div2 < ZYNQMP_DIV_MAX_VAL))
-                               return 0;
-               }
+DECLARE_GLOBAL_DATA_PTR;
+
+static const resource_size_t zynqmp_crf_apb_clkc_base = 0xfd1a0020;
+static const resource_size_t zynqmp_crl_apb_clkc_base = 0xff5e0020;
+static const resource_size_t zynqmp_iou_clkc_base = 0xff180000;
+
+/* Full power domain clocks */
+#define CRF_APB_APLL_CTRL              (zynqmp_crf_apb_clkc_base + 0x00)
+#define CRF_APB_DPLL_CTRL              (zynqmp_crf_apb_clkc_base + 0x0c)
+#define CRF_APB_VPLL_CTRL              (zynqmp_crf_apb_clkc_base + 0x18)
+#define CRF_APB_PLL_STATUS             (zynqmp_crf_apb_clkc_base + 0x24)
+#define CRF_APB_APLL_TO_LPD_CTRL       (zynqmp_crf_apb_clkc_base + 0x28)
+#define CRF_APB_DPLL_TO_LPD_CTRL       (zynqmp_crf_apb_clkc_base + 0x2c)
+#define CRF_APB_VPLL_TO_LPD_CTRL       (zynqmp_crf_apb_clkc_base + 0x30)
+/* Peripheral clocks */
+#define CRF_APB_ACPU_CTRL              (zynqmp_crf_apb_clkc_base + 0x40)
+#define CRF_APB_DBG_TRACE_CTRL         (zynqmp_crf_apb_clkc_base + 0x44)
+#define CRF_APB_DBG_FPD_CTRL           (zynqmp_crf_apb_clkc_base + 0x48)
+#define CRF_APB_DP_VIDEO_REF_CTRL      (zynqmp_crf_apb_clkc_base + 0x50)
+#define CRF_APB_DP_AUDIO_REF_CTRL      (zynqmp_crf_apb_clkc_base + 0x54)
+#define CRF_APB_DP_STC_REF_CTRL                (zynqmp_crf_apb_clkc_base + 0x5c)
+#define CRF_APB_DDR_CTRL               (zynqmp_crf_apb_clkc_base + 0x60)
+#define CRF_APB_GPU_REF_CTRL           (zynqmp_crf_apb_clkc_base + 0x64)
+#define CRF_APB_SATA_REF_CTRL          (zynqmp_crf_apb_clkc_base + 0x80)
+#define CRF_APB_PCIE_REF_CTRL          (zynqmp_crf_apb_clkc_base + 0x94)
+#define CRF_APB_GDMA_REF_CTRL          (zynqmp_crf_apb_clkc_base + 0x98)
+#define CRF_APB_DPDMA_REF_CTRL         (zynqmp_crf_apb_clkc_base + 0x9c)
+#define CRF_APB_TOPSW_MAIN_CTRL                (zynqmp_crf_apb_clkc_base + 0xa0)
+#define CRF_APB_TOPSW_LSBUS_CTRL       (zynqmp_crf_apb_clkc_base + 0xa4)
+#define CRF_APB_GTGREF0_REF_CTRL       (zynqmp_crf_apb_clkc_base + 0xa8)
+#define CRF_APB_DBG_TSTMP_CTRL         (zynqmp_crf_apb_clkc_base + 0xd8)
+
+/* Low power domain clocks */
+#define CRL_APB_IOPLL_CTRL             (zynqmp_crl_apb_clkc_base + 0x00)
+#define CRL_APB_RPLL_CTRL              (zynqmp_crl_apb_clkc_base + 0x10)
+#define CRL_APB_PLL_STATUS             (zynqmp_crl_apb_clkc_base + 0x20)
+#define CRL_APB_IOPLL_TO_FPD_CTRL      (zynqmp_crl_apb_clkc_base + 0x24)
+#define CRL_APB_RPLL_TO_FPD_CTRL       (zynqmp_crl_apb_clkc_base + 0x28)
+/* Peripheral clocks */
+#define CRL_APB_USB3_DUAL_REF_CTRL     (zynqmp_crl_apb_clkc_base + 0x2c)
+#define CRL_APB_GEM0_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x30)
+#define CRL_APB_GEM1_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x34)
+#define CRL_APB_GEM2_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x38)
+#define CRL_APB_GEM3_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x3c)
+#define CRL_APB_USB0_BUS_REF_CTRL      (zynqmp_crl_apb_clkc_base + 0x40)
+#define CRL_APB_USB1_BUS_REF_CTRL      (zynqmp_crl_apb_clkc_base + 0x44)
+#define CRL_APB_QSPI_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x48)
+#define CRL_APB_SDIO0_REF_CTRL         (zynqmp_crl_apb_clkc_base + 0x4c)
+#define CRL_APB_SDIO1_REF_CTRL         (zynqmp_crl_apb_clkc_base + 0x50)
+#define CRL_APB_UART0_REF_CTRL         (zynqmp_crl_apb_clkc_base + 0x54)
+#define CRL_APB_UART1_REF_CTRL         (zynqmp_crl_apb_clkc_base + 0x58)
+#define CRL_APB_SPI0_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x5c)
+#define CRL_APB_SPI1_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x60)
+#define CRL_APB_CAN0_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x64)
+#define CRL_APB_CAN1_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x68)
+#define CRL_APB_CPU_R5_CTRL            (zynqmp_crl_apb_clkc_base + 0x70)
+#define CRL_APB_IOU_SWITCH_CTRL                (zynqmp_crl_apb_clkc_base + 0x7c)
+#define CRL_APB_CSU_PLL_CTRL           (zynqmp_crl_apb_clkc_base + 0x80)
+#define CRL_APB_PCAP_CTRL              (zynqmp_crl_apb_clkc_base + 0x84)
+#define CRL_APB_LPD_SWITCH_CTRL                (zynqmp_crl_apb_clkc_base + 0x88)
+#define CRL_APB_LPD_LSBUS_CTRL         (zynqmp_crl_apb_clkc_base + 0x8c)
+#define CRL_APB_DBG_LPD_CTRL           (zynqmp_crl_apb_clkc_base + 0x90)
+#define CRL_APB_NAND_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x94)
+#define CRL_APB_ADMA_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x98)
+#define CRL_APB_PL0_REF_CTRL           (zynqmp_crl_apb_clkc_base + 0xa0)
+#define CRL_APB_PL1_REF_CTRL           (zynqmp_crl_apb_clkc_base + 0xa4)
+#define CRL_APB_PL2_REF_CTRL           (zynqmp_crl_apb_clkc_base + 0xa8)
+#define CRL_APB_PL3_REF_CTRL           (zynqmp_crl_apb_clkc_base + 0xac)
+#define CRL_APB_PL0_THR_CNT            (zynqmp_crl_apb_clkc_base + 0xb4)
+#define CRL_APB_PL1_THR_CNT            (zynqmp_crl_apb_clkc_base + 0xbc)
+#define CRL_APB_PL2_THR_CNT            (zynqmp_crl_apb_clkc_base + 0xc4)
+#define CRL_APB_PL3_THR_CNT            (zynqmp_crl_apb_clkc_base + 0xdc)
+#define CRL_APB_GEM_TSU_REF_CTRL       (zynqmp_crl_apb_clkc_base + 0xe0)
+#define CRL_APB_DLL_REF_CTRL           (zynqmp_crl_apb_clkc_base + 0xe4)
+#define CRL_APB_AMS_REF_CTRL           (zynqmp_crl_apb_clkc_base + 0xe8)
+#define CRL_APB_I2C0_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x100)
+#define CRL_APB_I2C1_REF_CTRL          (zynqmp_crl_apb_clkc_base + 0x104)
+#define CRL_APB_TIMESTAMP_REF_CTRL     (zynqmp_crl_apb_clkc_base + 0x108)
+#define IOU_SLCR_GEM_CLK_CTRL          (zynqmp_iou_clkc_base + 0x308)
+#define IOU_SLCR_CAN_MIO_CTRL          (zynqmp_iou_clkc_base + 0x304)
+#define IOU_SLCR_WDT_CLK_SEL           (zynqmp_iou_clkc_base + 0x300)
+
+#define ZYNQ_CLK_MAXDIV                0x3f
+#define CLK_CTRL_DIV1_SHIFT    16
+#define CLK_CTRL_DIV1_MASK     (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
+#define CLK_CTRL_DIV0_SHIFT    8
+#define CLK_CTRL_DIV0_MASK     (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
+#define CLK_CTRL_SRCSEL_SHIFT  0
+#define CLK_CTRL_SRCSEL_MASK   (0x3 << CLK_CTRL_SRCSEL_SHIFT)
+#define PLLCTRL_FBDIV_MASK     0x7f00
+#define PLLCTRL_FBDIV_SHIFT    8
+#define PLLCTRL_RESET_MASK     1
+#define PLLCTRL_RESET_SHIFT    0
+#define PLLCTRL_BYPASS_MASK    0x8
+#define PLLCTRL_BYPASS_SHFT    3
+#define PLLCTRL_POST_SRC_SHFT  24
+#define PLLCTRL_POST_SRC_MASK  (0x7 << PLLCTRL_POST_SRC_SHFT)
+
+
+#define NUM_MIO_PINS   77
+
+enum zynqmp_clk {
+       iopll, rpll,
+       apll, dpll, vpll,
+       iopll_to_fpd, rpll_to_fpd, apll_to_lpd, dpll_to_lpd, vpll_to_lpd,
+       acpu, acpu_half,
+       dbg_fpd, dbg_lpd, dbg_trace, dbg_tstmp,
+       dp_video_ref, dp_audio_ref,
+       dp_stc_ref, gdma_ref, dpdma_ref,
+       ddr_ref, sata_ref, pcie_ref,
+       gpu_ref, gpu_pp0_ref, gpu_pp1_ref,
+       topsw_main, topsw_lsbus,
+       gtgref0_ref,
+       lpd_switch, lpd_lsbus,
+       usb0_bus_ref, usb1_bus_ref, usb3_dual_ref, usb0, usb1,
+       cpu_r5, cpu_r5_core,
+       csu_spb, csu_pll, pcap,
+       iou_switch,
+       gem_tsu_ref, gem_tsu,
+       gem0_ref, gem1_ref, gem2_ref, gem3_ref,
+       gem0_rx, gem1_rx, gem2_rx, gem3_rx,
+       qspi_ref,
+       sdio0_ref, sdio1_ref,
+       uart0_ref, uart1_ref,
+       spi0_ref, spi1_ref,
+       nand_ref,
+       i2c0_ref, i2c1_ref, can0_ref, can1_ref, can0, can1,
+       dll_ref,
+       adma_ref,
+       timestamp_ref,
+       ams_ref,
+       pl0, pl1, pl2, pl3,
+       wdt,
+       clk_max,
+};
+
+static const char * const clk_names[clk_max] = {
+       "iopll", "rpll", "apll", "dpll",
+       "vpll", "iopll_to_fpd", "rpll_to_fpd",
+       "apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd",
+       "acpu", "acpu_half", "dbf_fpd", "dbf_lpd",
+       "dbg_trace", "dbg_tstmp", "dp_video_ref",
+       "dp_audio_ref", "dp_stc_ref", "gdma_ref",
+       "dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref",
+       "gpu_ref", "gpu_pp0_ref", "gpu_pp1_ref",
+       "topsw_main", "topsw_lsbus", "gtgref0_ref",
+       "lpd_switch", "lpd_lsbus", "usb0_bus_ref",
+       "usb1_bus_ref", "usb3_dual_ref", "usb0",
+       "usb1", "cpu_r5", "cpu_r5_core", "csu_spb",
+       "csu_pll", "pcap", "iou_switch", "gem_tsu_ref",
+       "gem_tsu", "gem0_ref", "gem1_ref", "gem2_ref",
+       "gem3_ref", "gem0_tx", "gem1_tx", "gem2_tx",
+       "gem3_tx", "qspi_ref", "sdio0_ref", "sdio1_ref",
+       "uart0_ref", "uart1_ref", "spi0_ref",
+       "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref",
+       "can0_ref", "can1_ref", "can0", "can1",
+       "dll_ref", "adma_ref", "timestamp_ref",
+       "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt"
+};
+
+struct zynqmp_clk_priv {
+       unsigned long ps_clk_freq;
+       unsigned long video_clk;
+       unsigned long pss_alt_ref_clk;
+       unsigned long gt_crx_ref_clk;
+       unsigned long aux_ref_clk;
+};
+
+static u32 zynqmp_clk_get_register(enum zynqmp_clk id)
+{
+       switch (id) {
+       case iopll:
+               return CRL_APB_IOPLL_CTRL;
+       case rpll:
+               return CRL_APB_RPLL_CTRL;
+       case apll:
+               return CRF_APB_APLL_CTRL;
+       case dpll:
+               return CRF_APB_DPLL_CTRL;
+       case vpll:
+               return CRF_APB_VPLL_CTRL;
+       case acpu:
+               return CRF_APB_ACPU_CTRL;
+       case ddr_ref:
+               return CRF_APB_DDR_CTRL;
+       case qspi_ref:
+               return CRL_APB_QSPI_REF_CTRL;
+       case gem0_ref:
+               return CRL_APB_GEM0_REF_CTRL;
+       case gem1_ref:
+               return CRL_APB_GEM1_REF_CTRL;
+       case gem2_ref:
+               return CRL_APB_GEM2_REF_CTRL;
+       case gem3_ref:
+               return CRL_APB_GEM3_REF_CTRL;
+       case uart0_ref:
+               return CRL_APB_UART0_REF_CTRL;
+       case uart1_ref:
+               return CRL_APB_UART1_REF_CTRL;
+       case sdio0_ref:
+               return CRL_APB_SDIO0_REF_CTRL;
+       case sdio1_ref:
+               return CRL_APB_SDIO1_REF_CTRL;
+       case spi0_ref:
+               return CRL_APB_SPI0_REF_CTRL;
+       case spi1_ref:
+               return CRL_APB_SPI1_REF_CTRL;
+       case nand_ref:
+               return CRL_APB_NAND_REF_CTRL;
+       case i2c0_ref:
+               return CRL_APB_I2C0_REF_CTRL;
+       case i2c1_ref:
+               return CRL_APB_I2C1_REF_CTRL;
+       case can0_ref:
+               return CRL_APB_CAN0_REF_CTRL;
+       case can1_ref:
+               return CRL_APB_CAN1_REF_CTRL;
+       default:
+               debug("Invalid clk id%d\n", id);
        }
+       return 0;
+}
+
+static enum zynqmp_clk zynqmp_clk_get_cpu_pll(u32 clk_ctrl)
+{
+       u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
+                     CLK_CTRL_SRCSEL_SHIFT;
 
-       return -1;
+       switch (srcsel) {
+       case 2:
+               return dpll;
+       case 3:
+               return vpll;
+       case 0 ... 1:
+       default:
+               return apll;
+       }
 }
 
-static int zynqmp_get_periph_id(unsigned long id)
+static enum zynqmp_clk zynqmp_clk_get_ddr_pll(u32 clk_ctrl)
 {
-       int periph_id;
+       u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
+                     CLK_CTRL_SRCSEL_SHIFT;
 
-       switch (id) {
-       case ZYNQMP_GEM0_CLK_ID:
-               periph_id = 0;
-               break;
-       case ZYNQMP_GEM1_CLK_ID:
-               periph_id = 1;
-               break;
-       case ZYNQMP_GEM2_CLK_ID:
-               periph_id = 2;
-               break;
-       case ZYNQMP_GEM3_CLK_ID:
-               periph_id = 3;
-               break;
+       switch (srcsel) {
+       case 1:
+               return vpll;
+       case 0:
        default:
-               printf("%s, Invalid clock id:%ld\n", __func__, id);
-               return -EINVAL;
+               return dpll;
+       }
+}
+
+static enum zynqmp_clk zynqmp_clk_get_peripheral_pll(u32 clk_ctrl)
+{
+       u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
+                     CLK_CTRL_SRCSEL_SHIFT;
+
+       switch (srcsel) {
+       case 2:
+               return rpll;
+       case 3:
+               return dpll;
+       case 0 ... 1:
+       default:
+               return iopll;
        }
+}
 
-       return periph_id;
+static ulong zynqmp_clk_get_pll_src(ulong clk_ctrl,
+                                   struct zynqmp_clk_priv *priv,
+                                   bool is_pre_src)
+{
+       u32 src_sel;
+
+       if (is_pre_src)
+               src_sel = (clk_ctrl & PLLCTRL_POST_SRC_MASK) >>
+                          PLLCTRL_POST_SRC_SHFT;
+       else
+               src_sel = (clk_ctrl & PLLCTRL_POST_SRC_MASK) >>
+                          PLLCTRL_POST_SRC_SHFT;
+
+       switch (src_sel) {
+       case 4:
+               return priv->video_clk;
+       case 5:
+               return priv->pss_alt_ref_clk;
+       case 6:
+               return priv->aux_ref_clk;
+       case 7:
+               return priv->gt_crx_ref_clk;
+       case 0 ... 3:
+       default:
+       return priv->ps_clk_freq;
+       }
 }
 
-static int zynqmp_set_clk(unsigned long id, u32 div1, u32 div2)
+static ulong zynqmp_clk_get_pll_rate(struct zynqmp_clk_priv *priv,
+                                    enum zynqmp_clk id)
 {
-       struct pt_regs regs;
-       ulong reg;
-       u32 mask, value;
+       u32 clk_ctrl, reset, mul;
+       ulong freq;
+       int ret;
 
-       id = zynqmp_get_periph_id(id);
-       if (id < 0)
-               return -EINVAL;
+       ret = zynqmp_mmio_read(zynqmp_clk_get_register(id), &clk_ctrl);
+       if (ret)
+               panic("%s mio read fail\n", __func__);
+
+       if (clk_ctrl & PLLCTRL_BYPASS_MASK)
+               freq = zynqmp_clk_get_pll_src(clk_ctrl, priv, 0);
+       else
+               freq = zynqmp_clk_get_pll_src(clk_ctrl, priv, 1);
 
-       reg = (ulong)((u32 *)ZYNQMP_GEM0_REF_CTRL + id);
-       mask = (ZYNQMP_DIV_MASK << ZYNQMP_DIV1_SHFT) |
-              (ZYNQMP_DIV_MASK << ZYNQMP_DIV2_SHFT);
-       value = (div1 << ZYNQMP_DIV1_SHFT) | (div2 << ZYNQMP_DIV2_SHFT);
+       reset = (clk_ctrl & PLLCTRL_RESET_MASK) >> PLLCTRL_RESET_SHIFT;
+       if (reset && !(clk_ctrl & PLLCTRL_BYPASS_MASK))
+               return 0;
 
-       debug("%s: reg:0x%lx, mask:0x%x, value:0x%x\n", __func__, reg, mask,
-             value);
+       mul = (clk_ctrl & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
 
-       regs.regs[0] = ZYNQMP_SIP_SVC_MMIO_WRITE;
-       regs.regs[1] = ((u64)mask << 32) | reg;
-       regs.regs[2] = value;
-       regs.regs[3] = 0;
+       freq *= mul;
 
-       smc_call(&regs);
+       if (clk_ctrl & (1 << 16))
+               freq /= 2;
 
-       return regs.regs[0];
+       return freq;
 }
 
-static unsigned long zynqmp_clk_get_rate(struct clk *clk)
+static ulong zynqmp_clk_get_cpu_rate(struct zynqmp_clk_priv *priv,
+                                    enum zynqmp_clk id)
 {
-       struct pt_regs regs;
-       ulong reg;
-       unsigned long value;
-       int id;
+       u32 clk_ctrl, div;
+       enum zynqmp_clk pll;
+       int ret;
+
+       ret = zynqmp_mmio_read(CRF_APB_ACPU_CTRL, &clk_ctrl);
+       if (ret)
+               panic("%s mio read fail\n", __func__);
 
-       id = zynqmp_get_periph_id(clk->id);
-       if (id < 0)
-               return -EINVAL;
 
-       reg = (ulong)((u32 *)ZYNQMP_GEM0_REF_CTRL + id);
+       div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
 
-       regs.regs[0] = ZYNQMP_SIP_SVC_MMIO_READ;
-       regs.regs[1] = reg;
-       regs.regs[2] = 0;
-       regs.regs[3] = 0;
+       pll = zynqmp_clk_get_cpu_pll(clk_ctrl);
 
-       smc_call(&regs);
+       return DIV_ROUND_CLOSEST(zynqmp_clk_get_pll_rate(priv, pll), div);
+}
 
-       value = upper_32_bits(regs.regs[0]);
+static ulong zynqmp_clk_get_ddr_rate(struct zynqmp_clk_priv *priv)
+{
+       u32 clk_ctrl, div;
+       enum zynqmp_clk pll;
+       int ret;
 
-       value &= ZYNQMP_GEM_REF_CTRL_SRC_MASK;
+       ret = zynqmp_mmio_read(CRF_APB_DDR_CTRL, &clk_ctrl);
+       if (ret)
+               panic("%s mio read fail\n", __func__);
 
-       switch (value) {
-       case 0:
-               regs.regs[1] = ZYNQMP_IOPLL_CTRL;
-               break;
-       case 2:
-               regs.regs[1] = ZYNQMP_RPLL_CTRL;
-               break;
-       case 3:
-               regs.regs[1] = ZYNQMP_DPLL_CTRL;
-               break;
-       default:
-               return -EINVAL;
+       div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+
+       pll = zynqmp_clk_get_ddr_pll(clk_ctrl);
+
+       return DIV_ROUND_CLOSEST(zynqmp_clk_get_pll_rate(priv, pll), div);
+}
+
+static ulong zynqmp_clk_get_peripheral_rate(struct zynqmp_clk_priv *priv,
+                                         enum zynqmp_clk id, bool two_divs)
+{
+       enum zynqmp_clk pll;
+       u32 clk_ctrl, div0;
+       u32 div1 = 1;
+       int ret;
+
+       ret = zynqmp_mmio_read(zynqmp_clk_get_register(id), &clk_ctrl);
+       if (ret)
+               panic("%s mio read fail\n", __func__);
+
+       div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+       if (!div0)
+               div0 = 1;
+
+       if (two_divs) {
+               div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+               if (!div1)
+                       div1 = 1;
        }
 
-       regs.regs[0] = ZYNQMP_SIP_SVC_MMIO_READ;
-       regs.regs[2] = 0;
-       regs.regs[3] = 0;
+       pll = zynqmp_clk_get_peripheral_pll(clk_ctrl);
 
-       smc_call(&regs);
+       return
+               DIV_ROUND_CLOSEST(
+                       DIV_ROUND_CLOSEST(
+                               zynqmp_clk_get_pll_rate(priv, pll), div0),
+                       div1);
+}
 
-       value = upper_32_bits(regs.regs[0]) &
-                (ZYNQMP_PLL_CTRL_FBDIV_MASK <<
-                ZYNQMP_PLL_CTRL_FBDIV_SHFT);
-       value >>= ZYNQMP_PLL_CTRL_FBDIV_SHFT;
-       value *= pss_ref_clk;
+static unsigned long zynqmp_clk_calc_peripheral_two_divs(ulong rate,
+                                                      ulong pll_rate,
+                                                      u32 *div0, u32 *div1)
+{
+       long new_err, best_err = (long)(~0UL >> 1);
+       ulong new_rate, best_rate = 0;
+       u32 d0, d1;
+
+       for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
+               for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
+                       new_rate = DIV_ROUND_CLOSEST(
+                                       DIV_ROUND_CLOSEST(pll_rate, d0), d1);
+                       new_err = abs(new_rate - rate);
+
+                       if (new_err < best_err) {
+                               *div0 = d0;
+                               *div1 = d1;
+                               best_err = new_err;
+                               best_rate = new_rate;
+                       }
+               }
+       }
 
-       return value;
+       return best_rate;
 }
 
-static ulong zynqmp_clk_set_rate(struct clk *clk, unsigned long clk_rate)
+static ulong zynqmp_clk_set_peripheral_rate(struct zynqmp_clk_priv *priv,
+                                         enum zynqmp_clk id, ulong rate,
+                                         bool two_divs)
 {
+       enum zynqmp_clk pll;
+       u32 clk_ctrl, div0 = 0, div1 = 0;
+       ulong pll_rate, new_rate;
+       u32 reg;
        int ret;
-       u32 div1 = 0;
-       u32 div2 = 0;
-       unsigned long input_clk;
+       u32 mask;
+
+       reg = zynqmp_clk_get_register(id);
+       ret = zynqmp_mmio_read(reg, &clk_ctrl);
+       if (ret)
+               panic("%s mio read fail\n", __func__);
+
+       pll = zynqmp_clk_get_peripheral_pll(clk_ctrl);
+       pll_rate = zynqmp_clk_get_pll_rate(priv, pll);
+       clk_ctrl &= ~CLK_CTRL_DIV0_MASK;
+       if (two_divs) {
+               clk_ctrl &= ~CLK_CTRL_DIV1_MASK;
+               new_rate = zynqmp_clk_calc_peripheral_two_divs(rate, pll_rate,
+                               &div0, &div1);
+               clk_ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
+       } else {
+               div0 = DIV_ROUND_CLOSEST(pll_rate, rate);
+               if (div0 > ZYNQ_CLK_MAXDIV)
+                       div0 = ZYNQ_CLK_MAXDIV;
+               new_rate = DIV_ROUND_CLOSEST(rate, div0);
+       }
+       clk_ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
 
-       input_clk = zynqmp_clk_get_rate(clk);
-       if (IS_ERR_VALUE(input_clk)) {
-               dev_err(dev, "failed to get input_clk\n");
-               return -EINVAL;
+       mask = (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT) |
+              (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT);
+
+       ret = zynqmp_mmio_write(reg, mask, clk_ctrl);
+       if (ret)
+               panic("%s mio write fail\n", __func__);
+
+       return new_rate;
+}
+
+static ulong zynqmp_clk_get_rate(struct clk *clk)
+{
+       struct zynqmp_clk_priv *priv = dev_get_priv(clk->dev);
+       enum zynqmp_clk id = clk->id;
+       bool two_divs = false;
+
+       switch (id) {
+       case iopll ... vpll:
+               return zynqmp_clk_get_pll_rate(priv, id);
+       case acpu:
+               return zynqmp_clk_get_cpu_rate(priv, id);
+       case ddr_ref:
+               return zynqmp_clk_get_ddr_rate(priv);
+       case gem0_ref ... gem3_ref:
+       case qspi_ref ... can1_ref:
+               two_divs = true;
+               return zynqmp_clk_get_peripheral_rate(priv, id, two_divs);
+       default:
+               return -ENXIO;
        }
+}
 
-       debug("%s: i/p CLK %ld, clk_rate:0x%ld\n", __func__, input_clk,
-             clk_rate);
+static ulong zynqmp_clk_set_rate(struct clk *clk, ulong rate)
+{
+       struct zynqmp_clk_priv *priv = dev_get_priv(clk->dev);
+       enum zynqmp_clk id = clk->id;
+       bool two_divs = true;
 
-       ret = zynqmp_calculate_divisors(clk_rate, input_clk, &div1, &div2);
-       if (ret) {
-               dev_err(dev, "failed to proper divisors\n");
-               return -EINVAL;
+       switch (id) {
+       case gem0_ref ... gem3_ref:
+       case qspi_ref ... can1_ref:
+               return zynqmp_clk_set_peripheral_rate(priv, id,
+                                                     rate, two_divs);
+       default:
+               return -ENXIO;
        }
+}
 
-       debug("%s: Div1:%d, Div2:%d\n", __func__, div1, div2);
+int soc_clk_dump(void)
+{
+       struct udevice *dev;
+       int i, ret;
 
-       ret = zynqmp_set_clk(clk->id, div1, div2);
-       if (ret) {
-               dev_err(dev, "failed to set gem clk\n");
-               return -EINVAL;
+       ret = uclass_get_device_by_driver(UCLASS_CLK,
+               DM_GET_DRIVER(zynqmp_clk), &dev);
+       if (ret)
+               return ret;
+
+       printf("clk\t\tfrequency\n");
+       for (i = 0; i < clk_max; i++) {
+               const char *name = clk_names[i];
+               if (name) {
+                       struct clk clk;
+                       unsigned long rate;
+
+                       clk.id = i;
+                       ret = clk_request(dev, &clk);
+                       if (ret < 0)
+                               return ret;
+
+                       rate = clk_get_rate(&clk);
+
+                       clk_free(&clk);
+
+                       if ((rate == (unsigned long)-ENOSYS) ||
+                           (rate == (unsigned long)-ENXIO))
+                               printf("%10s%20s\n", name, "unknown");
+                       else
+                               printf("%10s%20lu\n", name, rate);
+               }
        }
 
        return 0;
 }
 
-static int zynqmp_clk_probe(struct udevice *dev)
+static int zynqmp_get_freq_by_name(char *name, struct udevice *dev, ulong *freq)
 {
        struct clk clk;
        int ret;
 
-       debug("%s\n", __func__);
-       ret = clk_get_by_name(dev, "pss_ref_clk", &clk);
+       ret = clk_get_by_name(dev, name, &clk);
        if (ret < 0) {
-               dev_err(dev, "failed to get pss_ref_clk\n");
+               dev_err(dev, "failed to get %s\n", name);
                return ret;
        }
 
-       pss_ref_clk = clk_get_rate(&clk);
-       if (IS_ERR_VALUE(pss_ref_clk)) {
-               dev_err(dev, "failed to get rate pss_ref_clk\n");
+       *freq = clk_get_rate(&clk);
+       if (IS_ERR_VALUE(*freq)) {
+               dev_err(dev, "failed to get rate %s\n", name);
                return -EINVAL;
        }
 
        return 0;
 }
+static int zynqmp_clk_probe(struct udevice *dev)
+{
+       int ret;
+       struct zynqmp_clk_priv *priv = dev_get_priv(dev);
+
+       debug("%s\n", __func__);
+       ret = zynqmp_get_freq_by_name("pss_ref_clk", dev, &priv->ps_clk_freq);
+       if (ret < 0)
+               return -EINVAL;
+
+       ret = zynqmp_get_freq_by_name("video_clk", dev, &priv->video_clk);
+       if (ret < 0)
+               return -EINVAL;
+
+       ret = zynqmp_get_freq_by_name("pss_alt_ref_clk", dev,
+                                     &priv->pss_alt_ref_clk);
+       if (ret < 0)
+               return -EINVAL;
+
+       ret = zynqmp_get_freq_by_name("aux_ref_clk", dev, &priv->aux_ref_clk);
+       if (ret < 0)
+               return -EINVAL;
+
+       ret = zynqmp_get_freq_by_name("gt_crx_ref_clk", dev,
+                                     &priv->gt_crx_ref_clk);
+       if (ret < 0)
+               return -EINVAL;
+
+       return 0;
+}
 
 static struct clk_ops zynqmp_clk_ops = {
        .set_rate = zynqmp_clk_set_rate,
@@ -238,4 +616,5 @@ U_BOOT_DRIVER(zynqmp_clk) = {
        .of_match = zynqmp_clk_ids,
        .probe = zynqmp_clk_probe,
        .ops = &zynqmp_clk_ops,
+       .priv_auto_alloc_size = sizeof(struct zynqmp_clk_priv),
 };