]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: mvebu: Remove theadorable_defconfig
authorStefan Roese <sr@denx.de>
Wed, 30 Aug 2017 07:55:01 +0000 (09:55 +0200)
committerStefan Roese <sr@denx.de>
Tue, 26 Sep 2017 04:51:37 +0000 (06:51 +0200)
Currently, we support 2 "theadorable" MVEBU build targets. One with a
stripped down configuration (theadorable) and one with a full blown
configuration (theadorable_debug), including PCI, ethernet etc. When
we introduced these configs, the plan was to remove the debug version
at some point. But now it seems better to keep the full-blown version
and remove the "non-debug" version instead.

At a later stage, I will rename the remaining "theadorable_debug"
target into a more fitting one.

Signed-off-by: Stefan Roese <sr@denx.de>
board/theadorable/MAINTAINERS
configs/theadorable_defconfig [deleted file]

index 5ae6b6487c4bcc83a3b36226c33967d186cc007d..1e8df93d37992b5beee162f7d310951f2050406b 100644 (file)
@@ -4,4 +4,3 @@ S:      Maintained
 F:     board/theadorable/
 F:     include/configs/theadorable.h
 F:     configs/theadorable_debug_defconfig
-F:     configs/theadorable_defconfig
diff --git a/configs/theadorable_defconfig b/configs/theadorable_defconfig
deleted file mode 100644 (file)
index 0639f81..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_THEADORABLE=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
-CONFIG_DEBUG_UART=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-# CONFIG_SPL_PARTITION_UUIDS is not set
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_FPGA_ALTERA=y
-CONFIG_DM_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DEBUG_UART_BASE=0xd0012000
-CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_SYS_NS16550=y
-CONFIG_VIDEO_MVEBU=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_REGEX=y
-CONFIG_LIB_RAND=y