OMAP4: Fix bug in omap4460_volts struct

The omap4460_volts struct was incorrectly referencing tps62361
instead of twl6030 as PMIC for the core and mm voltages (the
tps is used for mpu supply only). This shall lead to bad OPP
settings while booting kernel. Fixing it.

Fix some comments as well.

Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>

diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 7551b9861ee68d1daf7051ac58812b276c1688dd..04977b4f2b2c4de5bb9a9af56b844926465fb4d5 100644 (file)
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -216,14 +216,14 @@ struct dplls omap4460_dplls = {
 
 struct pmic_data twl6030_4430es1 = {
        .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
-       .step = 12660, /* 10 mV represented in uV */
+       .step = 12660, /* 12.66 mV represented in uV */
        /* The code starts at 1 not 0 */
        .start_code = 1,
 };
 
 struct pmic_data twl6030 = {
        .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
-       .step = 12660, /* 10 mV represented in uV */
+       .step = 12660, /* 12.66 mV represented in uV */
        /* The code starts at 1 not 0 */
        .start_code = 1,
 };
@@ -271,11 +271,11 @@ struct vcores_data omap4460_volts = {
 
        .core.value = 1200,
        .core.addr = SMPS_REG_ADDR_VCORE1,
-       .core.pmic = &tps62361,
+       .core.pmic = &twl6030,
 
        .mm.value = 1200,
        .mm.addr = SMPS_REG_ADDR_VCORE2,
-       .mm.pmic = &tps62361,
+       .mm.pmic = &twl6030,
 };
 
 /*