colibri_vf: use UUID for rootfs

Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
partition. This fixes the issue, when MMC controllers are probed in
a different order in U-boot and Linux kernel.

Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 0d57e303a1bdfca6aa6f5fca6f51e9ee894d1e2f..da9a8426ecdd450b3cf747df2e9e521626993099 100644 (file)
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -68,12 +68,19 @@
        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-       "sdargs=root=/dev/mmcblk0p2 ro rootwait\0"      \
-       "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
+       "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0"  \
+       "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+       "setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
        "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-       "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-       "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+       "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+       "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
+               "${soc}-colibri-${fdt_board}.dtb && " \
        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "sdbootpart=1\0" \
+       "sddev=0\0" \
+       "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+       "sdrootpart=2\0"
+
 
 #define UBI_BOOTCMD \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \