ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1

Copy the devicetree source for the V3(s)/S3 SoCs and all existing boards
verbatim from the Linux v5.18-rc1 tag.

This commit also adds the following new board devicetrees:
 - sun8i-s3-elimo-initium.dts
 - sun8i-v3-sl631-imx179.dts

This update should not impact any existing U-Boot functionality.

Signed-off-by: Samuel Holland <samuel@sholland.org>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 45dcf2e37fd3b7b40a99c49e7f52e7effd7f345d..e0f856b41999ca293cfc3ba6918decf87b021fc2 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -669,7 +669,9 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
        sun8i-r40-bananapi-m2-ultra.dtb \
        sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+       sun8i-s3-elimo-initium.dtb \
        sun8i-s3-pinecube.dtb \
+       sun8i-v3-sl631-imx179.dtb \
        sun8i-v3s-licheepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN50I_H5) += \
        sun50i-h5-bananapi-m2-plus.dtb \

diff --git a/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
new file mode 100644 (file)
index 0000000..052b010
--- /dev/null
+++ b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+       model = "Elimo Impetus SoM";
+       compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&mmc0 {
+       broken-cd;
+       bus-width = <4>;
+       vmmc-supply = <&reg_vcc3v3>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-0 = <&uart0_pb_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};

diff --git a/arch/arm/dts/sun8i-s3-elimo-initium.dts b/arch/arm/dts/sun8i-s3-elimo-initium.dts
new file mode 100644 (file)
index 0000000..039677c
--- /dev/null
+++ b/arch/arm/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+       model = "Elimo Initium";
+       compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+                    "allwinner,sun8i-v3";
+
+       aliases {
+               serial1 = &uart1;
+       };
+};
+
+&uart1 {
+       pinctrl-0 = <&uart1_pg_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&emac {
+       phy-handle = <&int_mii_phy>;
+       phy-mode = "mii";
+       status = "okay";
+};

diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts
index 9bab6b7f4014d6f064a637724c6238cfe4fcbc59..20966e954eda89cf309a97629ec10e8cda92dd31 100644 (file)
--- a/arch/arm/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/dts/sun8i-s3-pinecube.dts
@@ -10,7 +10,7 @@
 
 / {
        model = "PineCube IP Camera";
-       compatible = "pine64,pinecube", "allwinner,sun8i-s3";
+       compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
 
        aliases {
                serial0 = &uart2;
@@ -64,9 +64,6 @@
        status = "okay";
 
        port {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
                csi1_ep: endpoint {
                        remote-endpoint = <&ov5640_ep>;
                        bus-width = <8>;
@@ -88,13 +85,9 @@
        status = "okay";
 
        axp209: pmic@34 {
-               compatible = "x-powers,axp203",
-                            "x-powers,axp209";
                reg = <0x34>;
-               interrupt-parent = <&gic>;
-               interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-               interrupt-controller;
-               #interrupt-cells = <1>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
        };
 };
 

diff --git a/arch/arm/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/dts/sun8i-v3-sl631-imx179.dts
new file mode 100644 (file)
index 0000000..117aeec
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+       model = "SL631 Action Camera with IMX179";
+       compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+                    "allwinner,sun8i-v3";
+};

diff --git a/arch/arm/dts/sun8i-v3-sl631.dtsi b/arch/arm/dts/sun8i-v3-sl631.dtsi
new file mode 100644 (file)
index 0000000..6f93f8c
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "SL631 Action Camera";
+       compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+       aliases {
+               serial0 = &uart1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&i2c0 {
+       status = "okay";
+
+       axp209: pmic@34 {
+               reg = <0x34>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pb_pins>;
+       status = "okay";
+};
+
+&lradc {
+       vref-supply = <&reg_ldo2>;
+       status = "okay";
+
+       button-174 {
+               label = "Down";
+               linux,code = <KEY_DOWN>;
+               channel = <0>;
+               voltage = <174603>;
+       };
+
+       button-384 {
+               label = "Up";
+               linux,code = <KEY_UP>;
+               channel = <0>;
+               voltage = <384126>;
+       };
+
+       button-593 {
+               label = "OK";
+               linux,code = <KEY_OK>;
+               channel = <0>;
+               voltage = <593650>;
+       };
+};
+
+&mmc0 {
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+       bus-width = <4>;
+       vmmc-supply = <&reg_dcdc3>;
+       status = "okay";
+};
+
+&pio {
+       vcc-pd-supply = <&reg_dcdc3>;
+       vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1250000>;
+       regulator-max-microvolt = <1250000>;
+       regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+       regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <50000000>;
+       };
+};
+
+&uart1 {
+       pinctrl-0 = <&uart1_pg_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};

diff --git a/arch/arm/dts/sun8i-v3.dtsi b/arch/arm/dts/sun8i-v3.dtsi
index ca4672ed2e0207a9c46876d3243983302c2bff0d..186c30cbe6ee8b13b180eb9f4808f63e29c5261b 100644 (file)
--- a/arch/arm/dts/sun8i-v3.dtsi
+++ b/arch/arm/dts/sun8i-v3.dtsi
@@ -1,14 +1,40 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
  */
 
 #include "sun8i-v3s.dtsi"
 
+/ {
+       soc {
+               i2s0: i2s@1c22000 {
+                       #sound-dai-cells = <0>;
+                       compatible = "allwinner,sun8i-v3-i2s",
+                                    "allwinner,sun8i-h3-i2s";
+                       reg = <0x01c22000 0x400>;
+                       interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+                       clock-names = "apb", "mod";
+                       dmas = <&dma 3>, <&dma 3>;
+                       dma-names = "rx", "tx";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2s0_pins>;
+                       resets = <&ccu RST_BUS_I2S0>;
+                       status = "disabled";
+               };
+       };
+};
+
 &ccu {
        compatible = "allwinner,sun8i-v3-ccu";
 };
 
+&codec_analog {
+       compatible = "allwinner,sun8i-v3-codec-analog",
+                    "allwinner,sun8i-h3-codec-analog";
+};
+
 &emac {
        /delete-property/ phy-handle;
        /delete-property/ phy-mode;
@@ -24,4 +50,14 @@
 
 &pio {
        compatible = "allwinner,sun8i-v3-pinctrl";
+
+       i2s0_pins: i2s0-pins {
+               pins = "PG10", "PG11", "PG12", "PG13";
+               function = "i2s";
+       };
+
+       uart1_pg_pins: uart1-pg-pins {
+               pins = "PG6", "PG7";
+               function = "uart1";
+       };
 };

diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
index db5cd0b8574b32da1b747b222c339fad4b484e07..752ad05c8f8315a15caefb56527bd435075f6d7d 100644 (file)
--- a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -49,16 +49,18 @@
        compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
                     "allwinner,sun8i-v3s";
 
+       aliases {
+               ethernet0 = &emac;
+       };
+
        leds {
                /* The LEDs use PG0~2 pins, which conflict with MMC1 */
                status = "disabled";
        };
 };
 
-&mmc1 {
-       broken-cd;
-       bus-width = <4>;
-       vmmc-supply = <&reg_vcc3v3>;
+&emac {
+       allwinner,leds-active-low;
        status = "okay";
 };
 
@@ -94,3 +96,10 @@
                voltage = <800000>;
        };
 };
+
+&mmc1 {
+       broken-cd;
+       bus-width = <4>;
+       vmmc-supply = <&reg_vcc3v3>;
+       status = "okay";
+};

diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
index 0c734167692156f5c260c8f5834e042eac8a3ed0..084323d5c61cb03c7e882c29dc21f298e77058bc 100644 (file)
--- a/arch/arm/dts/sun8i-v3s.dtsi
+++ b/arch/arm/dts/sun8i-v3s.dtsi
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -157,12 +158,30 @@
                syscon: system-control@1c00000 {
                        compatible = "allwinner,sun8i-v3s-system-control",
                                     "allwinner,sun8i-h3-system-control";
-                       reg = <0x01c00000 0x1000>;
+                       reg = <0x01c00000 0xd0>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
                };
 
+               nmi_intc: interrupt-controller@1c000d0 {
+                       compatible = "allwinner,sun8i-v3s-nmi",
+                                    "allwinner,sun9i-a80-nmi";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       reg = <0x01c000d0 0x0c>;
+                       interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               dma: dma-controller@1c02000 {
+                       compatible = "allwinner,sun8i-v3s-dma";
+                       reg = <0x01c02000 0x1000>;
+                       interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_DMA>;
+                       resets = <&ccu RST_BUS_DMA>;
+                       #dma-cells = <1>;
+               };
+
                tcon0: lcd-controller@1c0c000 {
                        compatible = "allwinner,sun8i-v3s-tcon";
                        reg = <0x01c0c000 0x1000>;
@@ -266,6 +285,8 @@
                        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
                        clock-names = "ahb", "mod";
+                       dmas = <&dma 16>, <&dma 16>;
+                       dma-names = "rx", "tx";
                        resets = <&ccu RST_BUS_CE>;
                        reset-names = "ahb";
                };
@@ -328,6 +349,12 @@
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
+                       /omit-if-no-ref/
+                       csi0_mclk_pin: csi0-mclk-pin {
+                               pins = "PE20";
+                               function = "csi_mipi";
+                       };
+
                        /omit-if-no-ref/
                        csi1_8bit_pins: csi1-8bit-pins {
                                pins = "PE0", "PE2", "PE3", "PE8", "PE9",
@@ -347,6 +374,12 @@
                                function = "i2c0";
                        };
 
+                       /omit-if-no-ref/
+                       i2c1_pb_pins: i2c1-pb-pins {
+                               pins = "PB8", "PB9";
+                               function = "i2c1";
+                       };
+
                        /omit-if-no-ref/
                        i2c1_pe_pins: i2c1-pe-pins {
                                pins = "PE21", "PE22";
@@ -401,6 +434,15 @@
                        clocks = <&osc24M>;
                };
 
+               pwm: pwm@1c21400 {
+                       compatible = "allwinner,sun8i-v3s-pwm",
+                                    "allwinner,sun7i-a20-pwm";
+                       reg = <0x01c21400 0xc>;
+                       clocks = <&osc24M>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+
                lradc: lradc@1c22800 {
                        compatible = "allwinner,sun4i-a10-lradc-keys";
                        reg = <0x01c22800 0x400>;
@@ -408,6 +450,25 @@
                        status = "disabled";
                };
 
+               codec: codec@1c22c00 {
+                       #sound-dai-cells = <0>;
+                       compatible = "allwinner,sun8i-v3s-codec";
+                       reg = <0x01c22c00 0x400>;
+                       interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+                       clock-names = "apb", "codec";
+                       resets = <&ccu RST_BUS_CODEC>;
+                       dmas = <&dma 15>, <&dma 15>;
+                       dma-names = "rx", "tx";
+                       allwinner,codec-analog-controls = <&codec_analog>;
+                       status = "disabled";
+               };
+
+               codec_analog: codec-analog@1c23000 {
+                       compatible = "allwinner,sun8i-v3s-codec-analog";
+                       reg = <0x01c23000 0x4>;
+               };
+
                uart0: serial@1c28000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x01c28000 0x400>;
@@ -415,6 +476,8 @@
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&ccu CLK_BUS_UART0>;
+                       dmas = <&dma 6>, <&dma 6>;
+                       dma-names = "rx", "tx";
                        resets = <&ccu RST_BUS_UART0>;
                        status = "disabled";
                };
@@ -426,6 +489,8 @@
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&ccu CLK_BUS_UART1>;
+                       dmas = <&dma 7>, <&dma 7>;
+                       dma-names = "rx", "tx";
                        resets = <&ccu RST_BUS_UART1>;
                        status = "disabled";
                };
@@ -437,6 +502,8 @@
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&ccu CLK_BUS_UART2>;
+                       dmas = <&dma 8>, <&dma 8>;
+                       dma-names = "rx", "tx";
                        resets = <&ccu RST_BUS_UART2>;
                        pinctrl-0 = <&uart2_pins>;
                        pinctrl-names = "default";
@@ -516,6 +583,8 @@
                        interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
                        clock-names = "ahb", "mod";
+                       dmas = <&dma 23>, <&dma 23>;
+                       dma-names = "rx", "tx";
                        pinctrl-names = "default";
                        pinctrl-0 = <&spi0_pins>;
                        resets = <&ccu RST_BUS_SPI0>;
@@ -524,6 +593,17 @@
                        #size-cells = <0>;
                };
 
+               gic: interrupt-controller@1c81000 {
+                       compatible = "arm,gic-400";
+                       reg = <0x01c81000 0x1000>,
+                             <0x01c82000 0x2000>,
+                             <0x01c84000 0x2000>,
+                             <0x01c86000 0x2000>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+               };
+
                csi1: camera@1cb4000 {
                        compatible = "allwinner,sun8i-v3s-csi";
                        reg = <0x01cb4000 0x3000>;
@@ -535,16 +615,5 @@
                        resets = <&ccu RST_BUS_CSI>;
                        status = "disabled";
                };
-
-               gic: interrupt-controller@1c81000 {
-                       compatible = "arm,gic-400";
-                       reg = <0x01c81000 0x1000>,
-                             <0x01c82000 0x1000>,
-                             <0x01c84000 0x2000>,
-                             <0x01c86000 0x2000>;
-                       interrupt-controller;
-                       #interrupt-cells = <3>;
-                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-               };
        };
 };