ARM: dts: sunxi: Remove unused devicetree headers

These files are not included anywhere and do not exist in the Linux
devicetree source.

Signed-off-by: Samuel Holland <samuel@sholland.org>

diff --git a/arch/arm/dts/sun5i-q8-common.dtsi b/arch/arm/dts/sun5i-q8-common.dtsi
deleted file mode 100644 (file)
index a78e189..0000000
--- a/arch/arm/dts/sun5i-q8-common.dtsi
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include "sunxi-q8-common.dtsi"
-
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-       aliases {
-               serial0 = &uart1;
-       };
-
-       backlight: backlight {
-               compatible = "pwm-backlight";
-               pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-               brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-               default-brightness-level = <8>;
-               /* TODO: backlight uses axp gpio1 as enable pin */
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&cpu0 {
-       cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-       status = "okay";
-};
-
-&i2c0 {
-       axp209: pmic@34 {
-               reg = <0x34>;
-               interrupts = <0>;
-       };
-};
-
-&i2c1 {
-       pcf8563: rtc@51 {
-               compatible = "nxp,pcf8563";
-               reg = <0x51>;
-       };
-};
-
-#include "axp209.dtsi"
-
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
-       vmmc-supply = <&reg_vcc3v0>;
-       bus-width = <4>;
-       cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-       cd-inverted;
-       status = "okay";
-};
-
-&otg_sram {
-       status = "okay";
-};
-
-&pio {
-       mmc0_cd_pin_q8: mmc0_cd_pin@0 {
-               allwinner,pins = "PG0";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               allwinner,pins = "PG1";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PG2";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       usb0_vbus_pin_a: usb0_vbus_pin@0 {
-               allwinner,pins = "PG12";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-};
-
-&reg_dcdc2 {
-       regulator-always-on;
-       regulator-min-microvolt = <1000000>;
-       regulator-max-microvolt = <1500000>;
-       regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-       regulator-always-on;
-       regulator-min-microvolt = <1000000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-       regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "avcc";
-};
-
-&reg_usb0_vbus {
-       gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins_b>;
-       status = "okay";
-};
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-       usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-       usb0_vbus-supply = <&reg_usb0_vbus>;
-       status = "okay";
-};

diff --git a/arch/arm/dts/sunxi-q8-common.dtsi b/arch/arm/dts/sunxi-q8-common.dtsi
deleted file mode 100644 (file)
index b824146..0000000
--- a/arch/arm/dts/sunxi-q8-common.dtsi
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include "sunxi-common-regulators.dtsi"
-
-&i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
-       status = "okay";
-};
-
-&i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
-       status = "okay";
-};
-
-&lradc {
-       vref-supply = <&reg_vcc3v0>;
-       status = "okay";
-
-       button@200 {
-               label = "Volume Up";
-               linux,code = <KEY_VOLUMEUP>;
-               channel = <0>;
-               voltage = <200000>;
-       };
-
-       button@400 {
-               label = "Volume Down";
-               linux,code = <KEY_VOLUMEDOWN>;
-               channel = <0>;
-               voltage = <400000>;
-       };
-};
-
-&pwm {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins>;
-       status = "okay";
-};