+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007, 2010 Freescale Semiconductor, Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>, Sep, 2007
- *
- * Description:
- * ULI 526x Ethernet port driver.
- * Based on the Linux driver: drivers/net/tulip/uli526x.c
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <miiphy.h>
-#include <linux/delay.h>
-
-/* some kernel function compatible define */
-
-#undef DEBUG
-
-/* Board/System/Debug information/definition */
-#define ULI_VENDOR_ID 0x10B9
-#define ULI5261_DEVICE_ID 0x5261
-#define ULI5263_DEVICE_ID 0x5263
-/* ULi M5261 ID*/
-#define PCI_ULI5261_ID (ULI5261_DEVICE_ID << 16 | ULI_VENDOR_ID)
-/* ULi M5263 ID*/
-#define PCI_ULI5263_ID (ULI5263_DEVICE_ID << 16 | ULI_VENDOR_ID)
-
-#define ULI526X_IO_SIZE 0x100
-#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
-#define RX_DESC_CNT PKTBUFSRX /* Allocated Rx descriptors */
-#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
-#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
-#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
-#define TX_BUF_ALLOC 0x300
-#define RX_ALLOC_SIZE PKTSIZE
-#define ULI526X_RESET 1
-#define CR0_DEFAULT 0
-#define CR6_DEFAULT 0x22200000
-#define CR7_DEFAULT 0x180c1
-#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
-#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
-#define MAX_PACKET_SIZE 1514
-#define ULI5261_MAX_MULTICAST 14
-#define RX_COPY_SIZE 100
-#define MAX_CHECK_PACKET 0x8000
-
-#define ULI526X_10MHF 0
-#define ULI526X_100MHF 1
-#define ULI526X_10MFD 4
-#define ULI526X_100MFD 5
-#define ULI526X_AUTO 8
-
-#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
-#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
-#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
-#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
-#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
-#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
-
-/* CR9 definition: SROM/MII */
-#define CR9_SROM_READ 0x4800
-#define CR9_SRCS 0x1
-#define CR9_SRCLK 0x2
-#define CR9_CRDOUT 0x8
-#define SROM_DATA_0 0x0
-#define SROM_DATA_1 0x4
-#define PHY_DATA_1 0x20000
-#define PHY_DATA_0 0x00000
-#define MDCLKH 0x10000
-
-#define PHY_POWER_DOWN 0x800
-
-#define SROM_V41_CODE 0x14
-
-#define SROM_CLK_WRITE(data, ioaddr) do { \
- outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \
- udelay(5); \
- outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK, ioaddr); \
- udelay(5); \
- outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \
- udelay(5); \
- } while (0)
-
-/* Structure/enum declaration */
-
-struct tx_desc {
- u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
- char *tx_buf_ptr; /* Data for us */
- struct tx_desc *next_tx_desc;
-};
-
-struct rx_desc {
- u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
- char *rx_buf_ptr; /* Data for us */
- struct rx_desc *next_rx_desc;
-};
-
-struct uli526x_board_info {
- u32 chip_id; /* Chip vendor/Device ID */
- pci_dev_t pdev;
-
- long ioaddr; /* I/O base address */
- u32 cr0_data;
- u32 cr5_data;
- u32 cr6_data;
- u32 cr7_data;
- u32 cr15_data;
-
- /* pointer for memory physical address */
- dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
- dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
- dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
- dma_addr_t first_tx_desc_dma;
- dma_addr_t first_rx_desc_dma;
-
- /* descriptor pointer */
- unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
- unsigned char *buf_pool_start; /* Tx buffer pool align dword */
- unsigned char *desc_pool_ptr; /* descriptor pool memory */
- struct tx_desc *first_tx_desc;
- struct tx_desc *tx_insert_ptr;
- struct tx_desc *tx_remove_ptr;
- struct rx_desc *first_rx_desc;
- struct rx_desc *rx_ready_ptr; /* packet come pointer */
- unsigned long tx_packet_cnt; /* transmitted packet count */
-
- u16 PHY_reg4; /* Saved Phyxcer register 4 value */
-
- u8 media_mode; /* user specify media mode */
- u8 op_mode; /* real work dedia mode */
- u8 phy_addr;
-
- /* NIC SROM data */
- unsigned char srom[128];
-};
-
-enum uli526x_offsets {
- DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
- DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
- DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
- DCR15 = 0x78
-};
-
-enum uli526x_CR6_bits {
- CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
- CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
- CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
-};
-
-/* Global variable declaration -- */
-
-static unsigned char uli526x_media_mode = ULI526X_AUTO;
-
-static struct tx_desc desc_pool_array[DESC_ALL_CNT + 0x20]
- __attribute__ ((aligned(32)));
-static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4];
-
-/* For module input parameter */
-static int mode = 8;
-
-/* function declaration -- */
-static int uli526x_start_xmit(struct eth_device *dev, void *packet, int length);
-static u16 read_srom_word(long, int);
-static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
-static void allocate_rx_buffer(struct uli526x_board_info *);
-static void update_cr6(u32, unsigned long);
-static u16 uli_phy_read(unsigned long, u8, u8, u32);
-static u16 phy_readby_cr10(unsigned long, u8, u8);
-static void uli_phy_write(unsigned long, u8, u8, u16, u32);
-static void phy_writeby_cr10(unsigned long, u8, u8, u16);
-static void phy_write_1bit(unsigned long, u32, u32);
-static u16 phy_read_1bit(unsigned long, u32);
-static int uli526x_rx_packet(struct eth_device *);
-static void uli526x_free_tx_pkt(struct eth_device *,
- struct uli526x_board_info *);
-static void uli526x_reuse_buf(struct rx_desc *);
-static void uli526x_init(struct eth_device *);
-static void uli526x_set_phyxcer(struct uli526x_board_info *);
-
-
-static int uli526x_init_one(struct eth_device *, struct bd_info *);
-static void uli526x_disable(struct eth_device *);
-static void set_mac_addr(struct eth_device *);
-
-static struct pci_device_id uli526x_pci_tbl[] = {
- { ULI_VENDOR_ID, ULI5261_DEVICE_ID}, /* 5261 device */
- { ULI_VENDOR_ID, ULI5263_DEVICE_ID}, /* 5263 device */
- {}
-};
-
-/* ULI526X network board routine */
-
-/*
- * Search ULI526X board, register it
- */
-
-int uli526x_initialize(struct bd_info *bis)
-{
- pci_dev_t devno;
- int card_number = 0;
- struct eth_device *dev;
- struct uli526x_board_info *db; /* board information structure */
-
- u32 iobase;
- int idx = 0;
-
- while (1) {
- /* Find PCI device */
- devno = pci_find_devices(uli526x_pci_tbl, idx++);
- if (devno < 0)
- break;
-
- pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
- iobase &= ~0xf;
-
- dev = (struct eth_device *)malloc(sizeof *dev);
- if (!dev) {
- printf("uli526x: Can not allocate memory\n");
- break;
- }
- memset(dev, 0, sizeof(*dev));
- sprintf(dev->name, "uli526x#%d", card_number);
- db = (struct uli526x_board_info *)
- malloc(sizeof(struct uli526x_board_info));
-
- dev->priv = db;
- db->pdev = devno;
- dev->iobase = iobase;
-
- dev->init = uli526x_init_one;
- dev->halt = uli526x_disable;
- dev->send = uli526x_start_xmit;
- dev->recv = uli526x_rx_packet;
-
- /* init db */
- db->ioaddr = dev->iobase;
- /* get chip id */
-
- pci_read_config_dword(devno, PCI_VENDOR_ID, &db->chip_id);
-#ifdef DEBUG
- printf("uli526x: uli526x @0x%x\n", iobase);
- printf("uli526x: chip_id%x\n", db->chip_id);
-#endif
- eth_register(dev);
- card_number++;
- pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
- udelay(10 * 1000);
- }
- return card_number;
-}
-
-static int uli526x_init_one(struct eth_device *dev, struct bd_info *bis)
-{
-
- struct uli526x_board_info *db = dev->priv;
- int i;
-
- switch (mode) {
- case ULI526X_10MHF:
- case ULI526X_100MHF:
- case ULI526X_10MFD:
- case ULI526X_100MFD:
- uli526x_media_mode = mode;
- break;
- default:
- uli526x_media_mode = ULI526X_AUTO;
- break;
- }
-
- /* Allocate Tx/Rx descriptor memory */
- db->desc_pool_ptr = (uchar *)&desc_pool_array[0];
- db->desc_pool_dma_ptr = (dma_addr_t)&desc_pool_array[0];
- if (db->desc_pool_ptr == NULL)
- return -1;
-
- db->buf_pool_ptr = (uchar *)&buf_pool[0];
- db->buf_pool_dma_ptr = (dma_addr_t)&buf_pool[0];
- if (db->buf_pool_ptr == NULL)
- return -1;
-
- db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
- db->first_tx_desc_dma = db->desc_pool_dma_ptr;
-
- db->buf_pool_start = db->buf_pool_ptr;
- db->buf_pool_dma_start = db->buf_pool_dma_ptr;
-
-#ifdef DEBUG
- printf("%s(): db->ioaddr= 0x%x\n",
- __FUNCTION__, db->ioaddr);
- printf("%s(): media_mode= 0x%x\n",
- __FUNCTION__, uli526x_media_mode);
- printf("%s(): db->desc_pool_ptr= 0x%x\n",
- __FUNCTION__, db->desc_pool_ptr);
- printf("%s(): db->desc_pool_dma_ptr= 0x%x\n",
- __FUNCTION__, db->desc_pool_dma_ptr);
- printf("%s(): db->buf_pool_ptr= 0x%x\n",
- __FUNCTION__, db->buf_pool_ptr);
- printf("%s(): db->buf_pool_dma_ptr= 0x%x\n",
- __FUNCTION__, db->buf_pool_dma_ptr);
-#endif
-
- /* read 64 word srom data */
- for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr,
- i));
-
- /* Set Node address */
- if (((db->srom[0] == 0xff) && (db->srom[1] == 0xff)) ||
- ((db->srom[0] == 0x00) && (db->srom[1] == 0x00)))
- /* SROM absent, so write MAC address to ID Table */
- set_mac_addr(dev);
- else { /*Exist SROM*/
- for (i = 0; i < 6; i++)
- dev->enetaddr[i] = db->srom[20 + i];
- }
-#ifdef DEBUG
- for (i = 0; i < 6; i++)
- printf("%c%02x", i ? ':' : ' ', dev->enetaddr[i]);
-#endif
- db->PHY_reg4 = 0x1e0;
-
- /* system variable init */
- db->cr6_data = CR6_DEFAULT ;
- db->cr6_data |= ULI526X_TXTH_256;
- db->cr0_data = CR0_DEFAULT;
- uli526x_init(dev);
- return 0;
-}
-
-static void uli526x_disable(struct eth_device *dev)
-{
-#ifdef DEBUG
- printf("uli526x_disable\n");
-#endif
- struct uli526x_board_info *db = dev->priv;
-
- if (!((inl(db->ioaddr + DCR12)) & 0x8)) {
- /* Reset & stop ULI526X board */
- outl(ULI526X_RESET, db->ioaddr + DCR0);
- udelay(5);
- uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
-
- /* reset the board */
- db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
- update_cr6(db->cr6_data, dev->iobase);
- outl(0, dev->iobase + DCR7); /* Disable Interrupt */
- outl(inl(dev->iobase + DCR5), dev->iobase + DCR5);
- }
-}
-
-/* Initialize ULI526X board
- * Reset ULI526X board
- * Initialize TX/Rx descriptor chain structure
- * Send the set-up frame
- * Enable Tx/Rx machine
- */
-
-static void uli526x_init(struct eth_device *dev)
-{
-
- struct uli526x_board_info *db = dev->priv;
- u8 phy_tmp;
- u16 phy_value;
- u16 phy_reg_reset;
-
- /* Reset M526x MAC controller */
- outl(ULI526X_RESET, db->ioaddr + DCR0); /* RESET MAC */
- udelay(100);
- outl(db->cr0_data, db->ioaddr + DCR0);
- udelay(5);
-
- /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
- db->phy_addr = 1;
- db->tx_packet_cnt = 0;
- for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
- /* peer add */
- phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
- if (phy_value != 0xffff && phy_value != 0) {
- db->phy_addr = phy_tmp;
- break;
- }
- }
-
-#ifdef DEBUG
- printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr);
- printf("%s(): db->phy_addr= 0x%x\n", __FUNCTION__, db->phy_addr);
-#endif
- if (phy_tmp == 32)
- printf("Can not find the phy address!!!");
-
- /* Parser SROM and media mode */
- db->media_mode = uli526x_media_mode;
-
- if (!(inl(db->ioaddr + DCR12) & 0x8)) {
- /* Phyxcer capability setting */
- phy_reg_reset = uli_phy_read(db->ioaddr,
- db->phy_addr, 0, db->chip_id);
- phy_reg_reset = (phy_reg_reset | 0x8000);
- uli_phy_write(db->ioaddr, db->phy_addr, 0,
- phy_reg_reset, db->chip_id);
- udelay(500);
-
- /* Process Phyxcer Media Mode */
- uli526x_set_phyxcer(db);
- }
- /* Media Mode Process */
- if (!(db->media_mode & ULI526X_AUTO))
- db->op_mode = db->media_mode; /* Force Mode */
-
- /* Initialize Transmit/Receive decriptor and CR3/4 */
- uli526x_descriptor_init(db, db->ioaddr);
-
- /* Init CR6 to program M526X operation */
- update_cr6(db->cr6_data, db->ioaddr);
-
- /* Init CR7, interrupt active bit */
- db->cr7_data = CR7_DEFAULT;
- outl(db->cr7_data, db->ioaddr + DCR7);
-
- /* Init CR15, Tx jabber and Rx watchdog timer */
- outl(db->cr15_data, db->ioaddr + DCR15);
-
- /* Enable ULI526X Tx/Rx function */
- db->cr6_data |= CR6_RXSC | CR6_TXSC;
- update_cr6(db->cr6_data, db->ioaddr);
- while (!(inl(db->ioaddr + DCR12) & 0x8))
- udelay(10);
-}
-
-/*
- * Hardware start transmission.
- * Send a packet to media from the upper layer.
- */
-
-static int uli526x_start_xmit(struct eth_device *dev, void *packet, int length)
-{
- struct uli526x_board_info *db = dev->priv;
- struct tx_desc *txptr;
- unsigned int len = length;
- /* Too large packet check */
- if (len > MAX_PACKET_SIZE) {
- printf(": big packet = %d\n", len);
- return 0;
- }
-
- /* No Tx resource check, it never happen nromally */
- if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
- printf("No Tx resource %ld\n", db->tx_packet_cnt);
- return 0;
- }
-
- /* Disable NIC interrupt */
- outl(0, dev->iobase + DCR7);
-
- /* transmit this packet */
- txptr = db->tx_insert_ptr;
- memcpy((char *)txptr->tx_buf_ptr, (char *)packet, (int)length);
- txptr->tdes1 = cpu_to_le32(0xe1000000 | length);
-
- /* Point to next transmit free descriptor */
- db->tx_insert_ptr = txptr->next_tx_desc;
-
- /* Transmit Packet Process */
- if ((db->tx_packet_cnt < TX_DESC_CNT)) {
- txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
- db->tx_packet_cnt++; /* Ready to send */
- outl(0x1, dev->iobase + DCR1); /* Issue Tx polling */
- }
-
- /* Got ULI526X status */
- db->cr5_data = inl(db->ioaddr + DCR5);
- outl(db->cr5_data, db->ioaddr + DCR5);
-
-#ifdef TX_DEBUG
- printf("%s(): length = 0x%x\n", __FUNCTION__, length);
- printf("%s(): cr5_data=%x\n", __FUNCTION__, db->cr5_data);
-#endif
-
- outl(db->cr7_data, dev->iobase + DCR7);
- uli526x_free_tx_pkt(dev, db);
-
- return length;
-}
-
-/*
- * Free TX resource after TX complete
- */
-
-static void uli526x_free_tx_pkt(struct eth_device *dev,
- struct uli526x_board_info *db)
-{
- struct tx_desc *txptr;
- u32 tdes0;
-
- txptr = db->tx_remove_ptr;
- while (db->tx_packet_cnt) {
- tdes0 = le32_to_cpu(txptr->tdes0);
- /* printf(DRV_NAME ": tdes0=%x\n", tdes0); */
- if (tdes0 & 0x80000000)
- break;
-
- /* A packet sent completed */
- db->tx_packet_cnt--;
-
- if (tdes0 != 0x7fffffff) {
-#ifdef TX_DEBUG
- printf("%s()tdes0=%x\n", __FUNCTION__, tdes0);
-#endif
- if (tdes0 & TDES0_ERR_MASK) {
- if (tdes0 & 0x0002) { /* UnderRun */
- if (!(db->cr6_data & CR6_SFT)) {
- db->cr6_data = db->cr6_data |
- CR6_SFT;
- update_cr6(db->cr6_data,
- db->ioaddr);
- }
- }
- }
- }
-
- txptr = txptr->next_tx_desc;
- }/* End of while */
-
- /* Update TX remove pointer to next */
- db->tx_remove_ptr = txptr;
-}
-
-
-/*
- * Receive the come packet and pass to upper layer
- */
-
-static int uli526x_rx_packet(struct eth_device *dev)
-{
- struct uli526x_board_info *db = dev->priv;
- struct rx_desc *rxptr;
- int rxlen = 0;
- u32 rdes0;
-
- rxptr = db->rx_ready_ptr;
-
- rdes0 = le32_to_cpu(rxptr->rdes0);
-#ifdef RX_DEBUG
- printf("%s(): rxptr->rdes0=%x\n", __FUNCTION__, rxptr->rdes0);
-#endif
- if (!(rdes0 & 0x80000000)) { /* packet owner check */
- if ((rdes0 & 0x300) != 0x300) {
- /* A packet without First/Last flag */
- /* reuse this buf */
- printf("A packet without First/Last flag");
- uli526x_reuse_buf(rxptr);
- } else {
- /* A packet with First/Last flag */
- rxlen = ((rdes0 >> 16) & 0x3fff) - 4;
-#ifdef RX_DEBUG
- printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen);
-#endif
- /* error summary bit check */
- if (rdes0 & 0x8000) {
- /* This is a error packet */
- printf("Error: rdes0: %x\n", rdes0);
- }
-
- if (!(rdes0 & 0x8000) ||
- ((db->cr6_data & CR6_PM) && (rxlen > 6))) {
-
-#ifdef RX_DEBUG
- printf("%s(): rx_skb_ptr =%x\n",
- __FUNCTION__, rxptr->rx_buf_ptr);
- printf("%s(): rxlen =%x\n",
- __FUNCTION__, rxlen);
-
- printf("%s(): buf addr =%x\n",
- __FUNCTION__, rxptr->rx_buf_ptr);
- printf("%s(): rxlen =%x\n",
- __FUNCTION__, rxlen);
- int i;
- for (i = 0; i < 0x20; i++)
- printf("%s(): data[%x] =%x\n",
- __FUNCTION__, i, rxptr->rx_buf_ptr[i]);
-#endif
-
- net_process_received_packet(
- (uchar *)rxptr->rx_buf_ptr, rxlen);
- uli526x_reuse_buf(rxptr);
-
- } else {
- /* Reuse SKB buffer when the packet is error */
- printf("Reuse buffer, rdes0");
- uli526x_reuse_buf(rxptr);
- }
- }
-
- rxptr = rxptr->next_rx_desc;
- }
-
- db->rx_ready_ptr = rxptr;
- return rxlen;
-}
-
-/*
- * Reuse the RX buffer
- */
-
-static void uli526x_reuse_buf(struct rx_desc *rxptr)
-{
-
- if (!(rxptr->rdes0 & cpu_to_le32(0x80000000)))
- rxptr->rdes0 = cpu_to_le32(0x80000000);
- else
- printf("Buffer reuse method error");
-}
-/*
- * Initialize transmit/Receive descriptor
- * Using Chain structure, and allocate Tx/Rx buffer
- */
-
-static void uli526x_descriptor_init(struct uli526x_board_info *db,
- unsigned long ioaddr)
-{
- struct tx_desc *tmp_tx;
- struct rx_desc *tmp_rx;
- unsigned char *tmp_buf;
- dma_addr_t tmp_tx_dma, tmp_rx_dma;
- dma_addr_t tmp_buf_dma;
- int i;
- /* tx descriptor start pointer */
- db->tx_insert_ptr = db->first_tx_desc;
- db->tx_remove_ptr = db->first_tx_desc;
-
- outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
-
- /* rx descriptor start pointer */
- db->first_rx_desc = (void *)db->first_tx_desc +
- sizeof(struct tx_desc) * TX_DESC_CNT;
- db->first_rx_desc_dma = db->first_tx_desc_dma +
- sizeof(struct tx_desc) * TX_DESC_CNT;
- db->rx_ready_ptr = db->first_rx_desc;
- outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
-#ifdef DEBUG
- printf("%s(): db->first_tx_desc= 0x%x\n",
- __FUNCTION__, db->first_tx_desc);
- printf("%s(): db->first_rx_desc_dma= 0x%x\n",
- __FUNCTION__, db->first_rx_desc_dma);
-#endif
- /* Init Transmit chain */
- tmp_buf = db->buf_pool_start;
- tmp_buf_dma = db->buf_pool_dma_start;
- tmp_tx_dma = db->first_tx_desc_dma;
- for (tmp_tx = db->first_tx_desc, i = 0;
- i < TX_DESC_CNT; i++, tmp_tx++) {
- tmp_tx->tx_buf_ptr = (char *)tmp_buf;
- tmp_tx->tdes0 = cpu_to_le32(0);
- tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
- tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
- tmp_tx_dma += sizeof(struct tx_desc);
- tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
- tmp_tx->next_tx_desc = tmp_tx + 1;
- tmp_buf = tmp_buf + TX_BUF_ALLOC;
- tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
- }
- (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
- tmp_tx->next_tx_desc = db->first_tx_desc;
-
- /* Init Receive descriptor chain */
- tmp_rx_dma = db->first_rx_desc_dma;
- for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT;
- i++, tmp_rx++) {
- tmp_rx->rdes0 = cpu_to_le32(0);
- tmp_rx->rdes1 = cpu_to_le32(0x01000600);
- tmp_rx_dma += sizeof(struct rx_desc);
- tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
- tmp_rx->next_rx_desc = tmp_rx + 1;
- }
- (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
- tmp_rx->next_rx_desc = db->first_rx_desc;
-
- /* pre-allocate Rx buffer */
- allocate_rx_buffer(db);
-}
-
-/*
- * Update CR6 value
- * Firstly stop ULI526X, then written value and start
- */
-
-static void update_cr6(u32 cr6_data, unsigned long ioaddr)
-{
-
- outl(cr6_data, ioaddr + DCR6);
- udelay(5);
-}
-
-/*
- * Allocate rx buffer,
- */
-
-static void allocate_rx_buffer(struct uli526x_board_info *db)
-{
- int index;
- struct rx_desc *rxptr;
- rxptr = db->first_rx_desc;
- u32 addr;
-
- for (index = 0; index < RX_DESC_CNT; index++) {
- addr = (u32)net_rx_packets[index];
- addr += (16 - (addr & 15));
- rxptr->rx_buf_ptr = (char *) addr;
- rxptr->rdes2 = cpu_to_le32(addr);
- rxptr->rdes0 = cpu_to_le32(0x80000000);
-#ifdef DEBUG
- printf("%s(): Number 0x%x:\n", __FUNCTION__, index);
- printf("%s(): addr 0x%x:\n", __FUNCTION__, addr);
- printf("%s(): rxptr address = 0x%x\n", __FUNCTION__, rxptr);
- printf("%s(): rxptr buf address = 0x%x\n", \
- __FUNCTION__, rxptr->rx_buf_ptr);
- printf("%s(): rdes2 = 0x%x\n", __FUNCTION__, rxptr->rdes2);
-#endif
- rxptr = rxptr->next_rx_desc;
- }
-}
-
-/*
- * Read one word data from the serial ROM
- */
-
-static u16 read_srom_word(long ioaddr, int offset)
-{
- int i;
- u16 srom_data = 0;
- long cr9_ioaddr = ioaddr + DCR9;
-
- outl(CR9_SROM_READ, cr9_ioaddr);
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
-
- /* Send the Read Command 110b */
- SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
- SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
- SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
-
- /* Send the offset */
- for (i = 5; i >= 0; i--) {
- srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
- SROM_CLK_WRITE(srom_data, cr9_ioaddr);
- }
-
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
-
- for (i = 16; i > 0; i--) {
- outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
- udelay(5);
- srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT)
- ? 1 : 0);
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
- udelay(5);
- }
-
- outl(CR9_SROM_READ, cr9_ioaddr);
- return srom_data;
-}
-
-/*
- * Set 10/100 phyxcer capability
- * AUTO mode : phyxcer register4 is NIC capability
- * Force mode: phyxcer register4 is the force media
- */
-
-static void uli526x_set_phyxcer(struct uli526x_board_info *db)
-{
- u16 phy_reg;
-
- /* Phyxcer capability setting */
- phy_reg = uli_phy_read(db->ioaddr,
- db->phy_addr, 4, db->chip_id) & ~0x01e0;
-
- if (db->media_mode & ULI526X_AUTO) {
- /* AUTO Mode */
- phy_reg |= db->PHY_reg4;
- } else {
- /* Force Mode */
- switch (db->media_mode) {
- case ULI526X_10MHF: phy_reg |= 0x20; break;
- case ULI526X_10MFD: phy_reg |= 0x40; break;
- case ULI526X_100MHF: phy_reg |= 0x80; break;
- case ULI526X_100MFD: phy_reg |= 0x100; break;
- }
-
- }
-
- /* Write new capability to Phyxcer Reg4 */
- if (!(phy_reg & 0x01e0)) {
- phy_reg |= db->PHY_reg4;
- db->media_mode |= ULI526X_AUTO;
- }
- uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
-
- /* Restart Auto-Negotiation */
- uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
- udelay(50);
-}
-
-/*
- * Write a word to Phy register
- */
-
-static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
- u16 phy_data, u32 chip_id)
-{
- u16 i;
- unsigned long ioaddr;
-
- if (chip_id == PCI_ULI5263_ID) {
- phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
- return;
- }
- /* M5261/M5263 Chip */
- ioaddr = iobase + DCR9;
-
- /* Send 33 synchronization clock to Phy controller */
- for (i = 0; i < 35; i++)
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
-
- /* Send start command(01) to Phy */
- phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
-
- /* Send write command(01) to Phy */
- phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
-
- /* Send Phy address */
- for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, phy_addr & i ?
- PHY_DATA_1 : PHY_DATA_0, chip_id);
-
- /* Send register address */
- for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, offset & i ?
- PHY_DATA_1 : PHY_DATA_0, chip_id);
-
- /* written trasnition */
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
- phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
-
- /* Write a word data to PHY controller */
- for (i = 0x8000; i > 0; i >>= 1)
- phy_write_1bit(ioaddr, phy_data & i ?
- PHY_DATA_1 : PHY_DATA_0, chip_id);
-}
-
-/*
- * Read a word data from phy register
- */
-
-static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset,
- u32 chip_id)
-{
- int i;
- u16 phy_data;
- unsigned long ioaddr;
-
- if (chip_id == PCI_ULI5263_ID)
- return phy_readby_cr10(iobase, phy_addr, offset);
- /* M5261/M5263 Chip */
- ioaddr = iobase + DCR9;
-
- /* Send 33 synchronization clock to Phy controller */
- for (i = 0; i < 35; i++)
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
-
- /* Send start command(01) to Phy */
- phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
-
- /* Send read command(10) to Phy */
- phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
- phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
-
- /* Send Phy address */
- for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, phy_addr & i ?
- PHY_DATA_1 : PHY_DATA_0, chip_id);
-
- /* Send register address */
- for (i = 0x10; i > 0; i = i >> 1)
- phy_write_1bit(ioaddr, offset & i ?
- PHY_DATA_1 : PHY_DATA_0, chip_id);
-
- /* Skip transition state */
- phy_read_1bit(ioaddr, chip_id);
-
- /* read 16bit data */
- for (phy_data = 0, i = 0; i < 16; i++) {
- phy_data <<= 1;
- phy_data |= phy_read_1bit(ioaddr, chip_id);
- }
-
- return phy_data;
-}
-
-static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
-{
- unsigned long ioaddr, cr10_value;
-
- ioaddr = iobase + DCR10;
- cr10_value = phy_addr;
- cr10_value = (cr10_value<<5) + offset;
- cr10_value = (cr10_value<<16) + 0x08000000;
- outl(cr10_value, ioaddr);
- udelay(1);
- while (1) {
- cr10_value = inl(ioaddr);
- if (cr10_value & 0x10000000)
- break;
- }
- return (cr10_value&0x0ffff);
-}
-
-static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr,
- u8 offset, u16 phy_data)
-{
- unsigned long ioaddr, cr10_value;
-
- ioaddr = iobase + DCR10;
- cr10_value = phy_addr;
- cr10_value = (cr10_value<<5) + offset;
- cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
- outl(cr10_value, ioaddr);
- udelay(1);
-}
-/*
- * Write one bit data to Phy Controller
- */
-
-static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
-{
- outl(phy_data , ioaddr); /* MII Clock Low */
- udelay(1);
- outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
- udelay(1);
- outl(phy_data , ioaddr); /* MII Clock Low */
- udelay(1);
-}
-
-/*
- * Read one bit phy data from PHY controller
- */
-
-static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
-{
- u16 phy_data;
-
- outl(0x50000 , ioaddr);
- udelay(1);
- phy_data = (inl(ioaddr) >> 19) & 0x1;
- outl(0x40000 , ioaddr);
- udelay(1);
-
- return phy_data;
-}
-
-/*
- * Set MAC address to ID Table
- */
-
-static void set_mac_addr(struct eth_device *dev)
-{
- int i;
- u16 addr;
- struct uli526x_board_info *db = dev->priv;
- outl(0x10000, db->ioaddr + DCR0); /* Diagnosis mode */
- /* Reset dianostic pointer port */
- outl(0x1c0, db->ioaddr + DCR13);
- outl(0, db->ioaddr + DCR14); /* Clear reset port */
- outl(0x10, db->ioaddr + DCR14); /* Reset ID Table pointer */
- outl(0, db->ioaddr + DCR14); /* Clear reset port */
- outl(0, db->ioaddr + DCR13); /* Clear CR13 */
- /* Select ID Table access port */
- outl(0x1b0, db->ioaddr + DCR13);
- /* Read MAC address from CR14 */
- for (i = 0; i < 3; i++) {
- addr = dev->enetaddr[2 * i] | (dev->enetaddr[2 * i + 1] << 8);
- outl(addr, db->ioaddr + DCR14);
- }
- /* write end */
- outl(0, db->ioaddr + DCR13); /* Clear CR13 */
- outl(0, db->ioaddr + DCR0); /* Clear CR0 */
- udelay(10);
- return;
-}
projects / u-boot.git / commitdiff